From The Archives. I wrote this a long time ago.I just made two push rods for 
my auto pilot and will be making my aileron' push 
rods shortly.   Wicks had all the stuff you need. All you need is to order 
R3/8X083-T6 tubing.  Two male rod ends. Item # XM3 and a couple of jam nuts. 
Cut your tube to length. Drill the ends of the tube with a #3 drill bit. A 
7/32" drill bit will also work. Tap the ends with a 1/4-28 tap. Then screw in 
the rod ends with the jam nuts. 

Paul ViskBelleville Il.618-406-4705
Search the KRnet Archives at
Please see LIST RULES and KRnet info at
see to change 
To UNsubscribe from KRnet, send a message to

Reply via email to