What I did to get my measurements was to take the pictures off of NV Aero's website and Mark Langford website and interpolator them to my measurements.
Paul ViskBelleville Il.618-406-4705 -------- Original message --------From: Robert Russell via KRnet <[email protected]> Date: 6/9/18 7:11 PM (GMT-06:00) To: '''KRnet''' <[email protected]> Cc: [email protected] Subject: KR> Gear legs I am wondering if anyone has a template or dimensions that I should cut the Grumman gear legs down to for my Kr2. The original weight of C-GSJS was just over 400 lbs. I don't want to make these new legs ( removed the original retracts) too stiff but sure don't want them to fail. I will also be adding tubing for the brake lines as per the archives emails. I will have to check the measurements but I think 1 inch thick and quite wide. Thanks Bob R Winnipeg _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
