Hi Stef. The glue is just to seal the edges and keep it in place while you install the metal. After you start installing the engine mount and other equipment, those penetrations help hold it to the structure as well. Good Progress! John Bouyea N5391M/ KR2 OR81/ Hillsboro, OR
-----Original Message----- Subject: Re: KR> Gleuing fibre frax Stef, You will want to use as little glue as possible, preferably around the edges. All you want is to hold the fiberfrax in place, not saturate its fibers more than you need to. With this in mind, I would put the glue on only one side, probably best to glue the wood if you can. iMs, Zip Hi all, I want to gleu the fibrefrax with red RTV 106, do I need to gleu the fibre frax to the firewall only at the wooden side, or to the woodenside and also to the steel side....or only to the steel side. Thanks Stef _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
