Hey Guys, Merry Christmas,
I have gotten restarted on the Dr. Dean project. The past couple weeks I
was able to complete sanding and glassing the top of the left wing. The wing
fuel cap lid was fabricated and installed. We cut the wing loose and turned it
over. Got it all jigged up and the trailing edge is epoxy/floxed. Should be
ready to glass the bottom side over the holidays. Then on to the the right
side.
I had a little side issue with N357CJ that took a bit of researching. The
ADSB had quit sometime this fall. The end of the story is the WIFI transmitter
in the skyguard twx went bad. Thanks to Don at Skyguard for helping resolve it
and apparently the repair at no charge as i did not see any invoice.
Merry Building and Happy sanding folks,
Joe Horton,
N357Cj
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
