I recently decided I'd like to have a fuel flow meter in the KR. I selected the FC-10 with an FC-60 sensor. I had the spot in mind where I'd install the sensor. With sensor and instrument in hand I dived in to the KR this afternoon, upside down, under the forward deck to remove a section of fuel line. That section of line contains my fuel pressure regulator, needed for the Marvel-Schebler carb on the 0-200. With line in hand and a tape measure I realized the sensor would fit there and work reliably. Unfortunately that's the only spot in my entire fuel system that the sensor could be installed. So, back to the old reliable system, time and fuel burn.
The good news is someone will get a deal on an FC-10 / FC-60. ($300 plus $10 shipping)
Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
