Hey guys, Just a little progress. Bottom of Left wing is filled, sanded and ready to prime. We re installed the wing to the plane this morning. laid out the aileron and cut it loose. Trimmed it up and about ready for the 1/4" spars to fit. Anyone building the AS50 series, - I didn't think to check this item but the 1/4" mini spars for the aileron's need to be a good 2 1/2" wide not the 2" that is supplied with the kit wood. Shop tip for anyone knee deep in dust. When I built the first plane I came across a used bathroom exhaust fan. I wrapped the four sides and the bottom with 16" square pleated furnace filters. cut out the circle where the exhaust hole came out through the filter. Mounted the whole thing to the ceiling in the center of my shop with a pigtail cord to plug in when I need it. It really does work pretty dang good -especially when it is cold out and can't open the doors. I used it for painting the primer coats also but I rigged a exhaust so it didn't stir the dust up too, just cleaned the air and sent it outside. Joe Horton, N357CJ
_______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
