Craig. You need to tighten the caster nut on the nose wheel. You should feel resistance when you lift the nose and swivel the nose gear. There is no specified torque that I know of on that nut. I have all the Diehl drawings and instructions.
Mark Jones Oldsmar, Fl N771MJ “WunderBird” www.flykr2s.com [email protected] > On Apr 14, 2019, at 11:10 AM, Craig Williams via KRnet <[email protected]> > wrote: > > Had a bad shimmy in my nosewheel when I installed the fairing last week. > > So I pulled it off and installed new wheel bearings and tire. My question is > does the nylon washer need lubrication and what torque is needed on the > spindle nut? > > Thanks > Craig > > www.youtube.com/chwilliams5 > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
