Joe, This is a great exercise! Putting forward actual measurements from Roy Marsh's N133RM: 23 1/4" measurement from the front side of the main spar to the back side of the fire wall plywood and 105 1/2" measurement from the front side of the main spar to the point that the tape measure touches at the tail-post intersection at the rear floor position of the fuselage Note: the tail post doesn't intersect the floor so my measurement rearward goes the floor cross member of the so-called "Bulkhead "N" Note: width of the N133RM main spar is 2 1/2"not the 2 11/32" dimension in the KR2S drawing sheet W-1 titled "Spar Details" - relatively small variance but noted...
John Bouyea N133RM KR-2S OR81/ Hillsboro, OR -----Original Message----- Subject: Re: KR> fuselage dimensions Snip... >>... I have been on this net for at least 20 years now and I can't even think of how many times lengthing has been discussed... >>Joe Horton - _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
