Just looked on their website.  Depending on which model you have here are
the options: 

"Model A-30 Mods 4,5,8,9 altitude encoder. If not under warranty you may
send in the encoder for test and evaluation there is no charge for this.
We will quote you an overhaul or replacement cost."

Both Sparky's and mine needed no new parts or repairs as I recall . . .
all these years later.  They just put the cncoders on the bench to see if
they're operating within specs.  I sent mine back not because I wasn't
getting accurate altitude readouts but rather just because it was a free
service they provide.   Sending it in will help you narrow down whatever
is causing your altitude descrepency.  If your model is included in 4
through 9 (ours were) they can replace anything that might need replacing
(which they'll likely also do for free regardless of warranty . . . kind
of like Tiny Tach in this respect . . . great companies!)

If your ACK-30 is a really old series 1 - 3, I wouldn't be surprised if
they didn't just send you a new one or, a new one at a very discounted
price.  Spruce is charging $236 for their latest model so they aren't
expensive in any event.  

******************

Just thought to mention . . . anyone getting a transponder/encoder 24
month check, make sure you give your tx/encoder at least five minutes to
warm up.  Just turning them off and on with the test equipment hooked up
will likely cause the test equipment to not respond accurately.  Your
tx/encoder needs to be warmed up.  

Mike
KSEE
   
____________________________________________________________
Melissa McCarthy Tells All- How She Really Lost 132 Pounds
glancence-hality.com
http://thirdpartyoffers.juno.com/TGL3141/5e01801eb2d781e3cbfst04vuc
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
options.
To UNsubscribe from KRnet, send a message to [email protected]

Reply via email to