CORVAIR ENGINE FOR SALE Rebuilt short block by Roy Sazrafinski:
. Reground crank 10/10 . New OT10 cam and gear . New main bearings installed . Roy's 5th bearing . New rod bearings (.010 undersized) included Deep-sump oil pan from Fly Corvair with new oil pickup tube Cylinders, Pistons and rods from Fly Corvair Bored .060 oversize. Removed from WW's engine after less than 20 hrs. when he installed an all-new .100 cylinder and piston assembly. Rebuilt dual point distributer from Fly Corvair Gold oil filter housing from Fly Covair New valve covers with oil filler spout and crank case breather tube Cylinder baffles with spring clips Rebuilt heads by Falcon Machine. New valves, valve guides, dual springs, Sparkplug holes re-threaded. Gasket face re-machined and welded intake tubes. New hydraulic lifters New rocker arms and balls Pushrods, pushrod tubes and Viton O-rings High volume oil pump Dipstick and dipstick tube Exhaust manifold clamps Remanufactured vibration damper pulley with washer and bolt Gold prop hub from Fly Corvair Starter and flex plate with mounting hardware Complete engine gasket kit Various stainless steel bolts, nuts and washers grouped by assembly. The engine does not include Intake manifold, exhaust manifolds, Carburetor, generator and spark plug wires. Asking $4,000, if you pick up. If I have to ship, buyer pays cost of crating and shipping. Located in Minneapolis, MN. Phone 612-590-1414 email davesmccau...@comcast.net _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
