I have the plywood template for the tri-gear KR-2 based on the Diehl gear
leg size. This is the wrong template for the tail dragger version, nor the
KR-2S.
Sid Wood
California, MD, USA
On 6/6/2021 12:58 PM, [email protected] wrote:
I have a couple fiberglass gear legs and have been looking through the
archives for reference I seem to remember about a diagram or template to
cut them down.
Does any recall that? If so could you point me to that please?
Bob Russell
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Bob,
I'm surprised you haven't gotten a reply from someone with a Diehl gear
leg lying around. I have a rough drawing but no dimensions. If I can
find it back I have a temple I made years ago. If I locate it I'll give
you a duplicate or the dimensions. Are you looking to use the legs on a
KR2 or a 2s? Diehl legs for the KR2 are 24" but Jeff Scott and I went
with 30" legs for our stretched KR. With my 24" stretch and a tall
tailwheel the 30" leg works fine for me.
Larry Flesner
------------------------------
________________________________
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list delivery options at
https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board
-Search recent KRnet Archives at
https://list.krnet.org/empathy/list/krnet.list.krnet.org/
-Search John Bouyea's decades of archive at https://www.mail-archive.com/[email protected]/
