Forwarding from John to Group.
-----Original Message----- From: John Bouyea <[email protected]> To: Robert Schmitt <[email protected]> Sent: Wed, Sep 29, 2021 11:31 am Subject: Re: KR>Re: Bendix dual magneto Robert, I'm on vacation and cannot reply to the KRNet directly. If you'd forward this to the group, I fully agree with your assessment on the G3I wire option. I installed it on my Revmaster's Bendix 3000 magneto and am very happy with the outcome. You can see the wires in this link; http://bouyea.net/cur_proj/N133RM/engine_detail_shots.htm I brought a sample wire to the last KMVN gathering for show & tell. The hardest part of the install is screwing up the courage to drill the magneto cap! John Bouyea On Sep 29, 2021 2:59 AM, Rob Schmitt via KRnet <[email protected]> wrote: > > KR Net, > > I just sent Luis some info from G3I on Bendix mag upgrade I did, It was > pretty simple to do. It shows how the rivets go onto the harness wires inside > the magneto cover. > > I can't send the upgrade info to the group due to file size, but their web > site is; > > https://www.g3ignition.com > > And Price list is; > > https://www.g3ignition.com/current%20price%2006.27.2021.pdf > > I just checked their web site, all the parts you would need to do this > yourself is available to purchase for fairly low cost. > > Thanks, > > Rob Schmitt > > > -----Original Message----- > From: Luis Claudio via KRnet <[email protected]> > Sent: Wednesday, September 29, 2021 7:40 AM > To: KRnet <[email protected]> > Cc: Luis Claudio <[email protected]> > Subject: KR>Bendix dual magneto > > I ran into a major setback on my KR. The Bendix 3000 magneto that I am using > on my Revmaster is giving me issues. Last year I purchased the new 049 heads > from Revmaster and had the ignition wires converted to automotive plugs. I > was timing the mag and noticed that two of the rivets that make contact with > the magneto were missing at the end of the wires, also missing was a spring > where the wires contact the magneto. I am returning the magneto cover to > Revmaster to have the rivets re-installed and will try to find a spring for > the magneto. The spring sits in the bottom of the cup where the wires contact > the magneto. I need a solution to replace this antique magneto setup... > > Luis R Claudio, KR2S, N8981S, Dallas Texas ________________________________ > -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html > -Change list delivery options at > https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board > -Search recent KRnet Archives at > https://list.krnet.org/empathy/list/krnet.list.krnet.org/ > -Search John Bouyea's decades of archive at > https://www.mail-archive.com/[email protected]/ > ________________________________ > -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html > -Change list delivery options at > https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board > -Search recent KRnet Archives at > https://list.krnet.org/empathy/list/krnet.list.krnet.org/ > -Search John Bouyea's decades of archive at > https://www.mail-archive.com/[email protected]/ ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/[email protected]/
