Hi,
Simple circuit works well. Both DC and AC (resistors, caps, push-to-make
button, LEDs, var.resistor
-LEDs work here (colors) although the color-picker is really tiny.
-'Scope works well, but doesn't clear 'lines' from other circuits when they are
closed. (Y-axis scale would be nice)
-'dragging too fast' doesn't crash the program here
-The program uses 100% of cpu all the time.
-I think the 'scope just keeps filling data points into RAM, because RAM usage
climbs steadily until the virtual machine crashes (same as the kde3 version)
-The orientation icons are broken; the graphics are scrambled, but reorienting
components works.
-There are some other gfx glitches, but that might be because I run it in a
virtual machine - didn't have them on the previous builds though.
I ran most of the examples and all seem to work as intended.
Nice work, it almost up to date with the kde3 version :)
I'll see if I can test a little more, later.
Screenshot of simple test:
http://i.imgur.com/NZMJeZk.png
Keep up the good work :)
Regards,
Claus
--------------------------------------------------------------
umount /dev/vodka && eject /dev/stomach
-Mplayer crew
> Date: Sat, 4 Jul 2015 23:34:25 +0300
> From: zoltan.pad...@gmail.com
> To: ktechlab-devel@lists.sourceforge.net
> Subject: Re: [Ktechlab-devel] Latest update on github: adding components to
> circuits should work correctly
>
> Hi,
>
> I've pushed a new update to the github repository:
>
> https://github.com/ktechlab/ktechlab-0.3/commits/port-0.3.8-kde4-v1
>
>
> - It should fix the issue with the multiplying values of the
> components; now setting components' properties should work correctly.
> - Also now the simulation should be pausable.
> - Deleting components with the delete key should work now. Note that
> this action doesn't appear in the right-click menu, although it
> should.
>
> Known issues:
> - it doesn't build on 64-bit version of ubuntu 14.04, this issue needs
> investigation;
> - it crashes if components are dragged "too fast" to the circuit; for
> this issue debugging inside Qt + KDE librarires is needed, because the
> crash appears inside Qt.
> - LEDs doesn't have colors (only appears in settings); needs investigation.
>
> Feel free to test, and any feedback is welcome.
>
> Best regards,
>
> Zoltan
>
>
>
> 2015-06-04 23:39 GMT+03:00 Claus Andersen <sanguinius_...@hotmail.com>:
> > First of all, the drag&drop now works and the workspace updates
> > automatically (and much more fluently than the old version I might add!) :)
> > I can also draw wires between components, although it's a straight line
> > while dragging and auto-routed after I release the mouse.
> >
> > Issues:
> > Place a resistor on the workspace, it assigns it 10k ohm. Pick it up and
> > move it, it changes it to 1M ohm. Adding wires to the circuit and clicking
> > it again, raises it to 100M ohm.
> > Changing voltage freq and clicking it again lowers it to 10 micro ohm.
> > Actually while writing I found a pattern: click the resistor, click another
> > component and click the resistor again, and it multiplies the ohm value with
> > 100.
> > I can't change the value to anything else once it's hit 'Mega', (to 10k or
> > just 10 ohm) - however, I can turn it negative if I use the arrows to modify
> > the value :S
> > Same with a VAC source (freq./volt.) gets multiplied.
> >
> > For some reason I can't delete components, only 'cut' them.
> >
> > I have the same bug with dragging components too quickly to the workspace =
> > crash.
> >
> > LED only has 'color' as setting.
> >
> > That's it for my small test right now.
> > Great progress, keep at it :)
> >
> > Regards,
> >
> > Claus
> >
> >
> >
> > --------------------------------------------------------------
> >
> > umount /dev/vodka && eject /dev/stomach
> >
> > -Mplayer crew
> >
> >
> > ________________________________
> > Date: Thu, 4 Jun 2015 21:38:03 +0300
> > From: zoltan.pad...@gmail.com
> > To: ktechlab-devel@lists.sourceforge.net
> > Subject: Re: [Ktechlab-devel] Latest update on github: adding components to
> > circuits should work correctly
> >
> >
> >
> > Hi,
> >
> > I've added workarounds to the issues of (1) circuit view not repainting
> > automatically and (2) the component settings appearing too small. These are
> > just workarounds, but they should be acceptable until I fix all of the
> > crashes. One of the cases that intrigues me is the crash happening when I
> > drag a component to a circuit "too fast", so that the component
> > representation does not appear on the canvas when I release the mouse
> > button.
> >
> > The changes are on github, at the usual branch; feel free to test.
> >
> > Best regards,
> >
> > Zoltan
> >
> >
> > Claus Andersen <sanguinius_...@hotmail.com> (2015. május 31.):
> >
> >
> >
> >
> > Cool beans. Now the menus are populated with components and I can build a
> > circuit :)
> >
> > However, as I said in my previous email (I don't know if it made it to the
> > mailing list), the view port is not refreshed automatically: If I place a
> > component in the work area, it wont show up unless I move the mouse to the
> > component list or press a menu or similar.
> >
> > I can't really demonstrate it in a picture, so I hope you know what I mean.
> >
> > Component settings is hidden away in the top of the toolbar no matter how I
> > try to resize the window etc. - see attached picture.
> >
> > Otherwise it compiles and runs - and even simulates! - just not
> > automatically refreshed :)
> >
> > Keep up the good work.
> >
> > Regards,
> > Claus
> >
> >
> > edit: picture too big apparently, anyway you should know what I mean :)
> >
> >
> >
> >
> >
> >
> > --------------------------------------------------------------
> >
> > umount /dev/vodka && eject /dev/stomach
> >
> > -Mplayer crew
> >
> >
> > ________________________________
> > Date: Sun, 31 May 2015 11:09:27 +0300
> > From: zoltan.pad...@gmail.com
> > To: ktechlab-devel@lists.sourceforge.net
> > Subject: [Ktechlab-devel] Latest update on github: adding components to
> > circuits should work correctly
> >
> >
> > Hi,
> >
> > I've pushed a new series of commits to the ktechlab 0.3 repository; the new
> > changes should fix the showing of toolbar contents, including possibility of
> > add components to circuits / flowcode documents.
> >
> > Currently the remaining major things to fix are:
> > - redrawing of circuits/flowcode documents is glitchy, because in current
> > state ktechlab tries to paint widgets outside of the paint event handlers,
> > - ktechlab appears to crash quite often when adding/moving components on
> > circuits -- this needs further investigation.
> >
> > Here is a link to the repository and branch:
> >
> > https://github.com/ktechlab/ktechlab-0.3/tree/port-0.3.8-kde4-v1
> >
> > Feel free to test; feedback is welcome.
> >
> > The next thing on my todo list is fixing the repainting glitches.
> >
> > Have fun,
> >
> > Zoltan
> >
> >
> >
> >
> >
> > ------------------------------------------------------------------------------
> > _______________________________________________ Ktechlab-devel mailing list
> > Ktechlab-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
> >
> >
> > ------------------------------------------------------------------------------
> > _______________________________________________ Ktechlab-devel mailing list
> > Ktechlab-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
> >
> > ------------------------------------------------------------------------------
> >
> > _______________________________________________
> > Ktechlab-devel mailing list
> > Ktechlab-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
> >
>
> ------------------------------------------------------------------------------
> Don't Limit Your Business. Reach for the Cloud.
> GigeNET's Cloud Solutions provide you with the tools and support that
> you need to offload your IT needs and focus on growing your business.
> Configured For All Businesses. Start Your Cloud Today.
> https://www.gigenetcloud.com/
> _______________________________________________
> Ktechlab-devel mailing list
> Ktechlab-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
Ktechlab-devel mailing list
Ktechlab-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ktechlab-devel
