You have been subscribed to a public bug: wlan0: link is not ready
T61 Laptop Wifi works fine within boot but as for hibernation Networkmanager refuses to allow a connection again I have to kill networkmanager then restart it. Dec 8 21:09:46 jason-laptop kernel: [10445.000000] thinkpad_acpi: disabling subdriver bay Dec 8 21:09:46 jason-laptop kernel: [10445.044000] ACPI: AC Adapter [AC] (on-line) Dec 8 21:09:46 jason-laptop kernel: [10445.072000] ACPI: Battery Slot [BAT0] (battery present) Dec 8 21:11:45 jason-laptop kernel: [10564.280000] ADDRCONF(NETDEV_UP): wlan0: link is not ready Dec 8 21:20:53 jason-laptop kernel: [11112.272000] ADDRCONF(NETDEV_UP): wlan0: link is not ready Dec 8 21:21:56 jason-laptop kernel: [11174.864000] ADDRCONF(NETDEV_UP): wlan0: link is not ready DMESG [ 4.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.476000] scsi0 : ata_piix [ 4.476000] scsi1 : ata_piix [ 4.476000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011c30 irq 14 [ 4.476000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011c38 irq 15 [ 4.640000] ata1.00: ATA-7: ST9160821AS, 3.CLF, max UDMA/100 [ 4.640000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.656000] ata1.00: configured for UDMA/100 [ 4.696000] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 4.876000] usb 3-2: configuration #1 chosen from 1 choice [ 4.976000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-852, RB01, max UDMA/33 [ 5.148000] ata2.00: configured for UDMA/33 [ 5.148000] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CL PQ: 0 ANSI: 5 [ 5.148000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852 RB01 PQ: 0 ANSI: 5 [ 5.156000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.156000] sd 0:0:0:0: [sda] Write Protect is off [ 5.156000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.156000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.156000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.156000] sd 0:0:0:0: [sda] Write Protect is off [ 5.156000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.156000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.156000] sda: sda1 sda2 sda3 [ 5.236000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.240000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.240000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.244000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.244000] Uniform CD-ROM driver Revision: 3.20 [ 5.244000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.580000] Attempting manual resume [ 5.580000] swsusp: Resume From Partition 8:3 [ 5.580000] PM: Checking swsusp image. [ 5.580000] PM: Resume from disk failed. [ 5.596000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c200031020d] [ 5.624000] kjournald starting. Commit interval 5 seconds [ 5.624000] EXT3-fs: mounted filesystem with ordered data mode. [ 11.840000] input: PC Speaker as /class/input/input2 [ 11.960000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.964000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.992000] Linux agpgart interface v0.102 (c) Dave Jones [ 12.032000] sdhci: Secure Digital Host Controller Interface driver [ 12.032000] sdhci: Copyright(c) Pierre Ossman [ 12.032000] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21) [ 12.032000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 23 [ 12.032000] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 12.032000] mmc0: SDHCI at 0xf8101800 irq 23 DMA [ 12.116000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] [ 12.244000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 [ 12.244000] Socket status: 30000006 [ 12.244000] pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff [ 12.244000] cs: IO port probe 0x8000-0xbfff: clean. [ 12.244000] pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff [ 12.244000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 12.272000] Bluetooth: Core ver 2.11 [ 12.272000] NET: Registered protocol family 31 [ 12.272000] Bluetooth: HCI device and connection manager initialized [ 12.272000] Bluetooth: HCI socket layer initialized [ 12.396000] Bluetooth: HCI USB driver ver 2.9 [ 12.400000] usbcore: registered new interface driver hci_usb [ 12.452000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 12.452000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 12.496000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 12.536000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 12.536000] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 12.536000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22 [ 12.536000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 12.536000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 12.852000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22 [ 12.852000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 12.860000] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 12.860000] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 12.996000] cs: IO port probe 0x100-0x3af: clean. [ 12.996000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 12.996000] cs: IO port probe 0x820-0x8ff: clean. [ 13.000000] cs: IO port probe 0xc00-0xcf7: clean. [ 13.000000] cs: IO port probe 0xa00-0xaff: clean. [ 13.376000] lp: driver loaded but no devices found [ 13.456000] Adding 3180860k swap on /dev/sda3. Priority:-1 extents:1 across:3180860k [ 13.896000] EXT3 FS on sda2, internal journal [ 18.108000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 18.344000] input: TPPS/2 IBM TrackPoint as /class/input/input4 [ 19.404000] ACPI: AC Adapter [AC] (on-line) [ 19.416000] ACPI: ACPI Dock Station Driver [ 19.416000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 19.416000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 19.416000] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 19.416000] ACPI: \_SB_.PCI0.SATA.SCND.MSTR: found ejectable bay [ 19.416000] ACPI: \_SB_.PCI0.SATA.SCND.MSTR: Adding notify handler [ 19.416000] ACPI: Error installing bay notify handler [ 19.416000] ACPI: Bay [\_SB_.PCI0.SATA.SCND.MSTR] Added [ 19.472000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 19.472000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 19.508000] ACPI: Battery Slot [BAT0] (battery present) [ 19.532000] input: Power Button (FF) as /class/input/input5 [ 19.532000] ACPI: Power Button (FF) [PWRF] [ 19.532000] input: Lid Switch as /class/input/input6 [ 19.532000] ACPI: Lid Switch [LID] [ 19.532000] input: Sleep Button (CM) as /class/input/input7 [ 19.532000] ACPI: Sleep Button (CM) [SLPB] [ 20.660000] ppdev: user-space parallel port driver [ 20.884000] audit(1197153692.264:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5481 profile="/usr/sbin/cupsd" [ 20.948000] apm: BIOS not found. [ 21.172000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 21.172000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 21.172000] thinkpad_acpi: ThinkPad EC firmware 7KHT22WW-1.06 [ 21.176000] thinkpad_acpi: another device driver is already handling bay events [ 21.176000] thinkpad_acpi: disabling subdriver bay [ 22.368000] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 22.368000] vboxdrv: Successfully done. [ 22.788000] Failure registering capabilities with primary security module. [ 23.028000] Bluetooth: L2CAP ver 2.8 [ 23.028000] Bluetooth: L2CAP socket layer initialized [ 23.136000] Bluetooth: RFCOMM socket layer initialized [ 23.136000] Bluetooth: RFCOMM TTY layer initialized [ 23.136000] Bluetooth: RFCOMM ver 1.8 [ 26.944000] vmmon: module license 'unspecified' taints kernel. [ 26.944000] /dev/vmmon[5934]: VMCI: Driver initialized. [ 26.944000] /dev/vmmon[5934]: Module vmmon: registered with major=10 minor=165 [ 26.944000] /dev/vmmon[5934]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 26.944000] /dev/vmmon[5934]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 26.944000] /dev/vmmon[5934]: Module vmmon: initialized [ 27.660000] /dev/vmnet: open called by PID 5981 (vmnet-bridge) [ 27.660000] /dev/vmnet: hub 0 does not exist, allocating memory. [ 27.660000] /dev/vmnet: port on hub 0 successfully opened [ 27.660000] bridge-wlan0: enabling the bridge [ 27.660000] bridge-wlan0: up [ 27.660000] bridge-wlan0: already up [ 27.660000] bridge-wlan0: attached [ 28.012000] /dev/vmnet: open called by PID 5998 (vmnet-netifup) [ 28.012000] /dev/vmnet: hub 1 does not exist, allocating memory. [ 28.012000] /dev/vmnet: port on hub 1 successfully opened [ 28.076000] /dev/vmnet: open called by PID 5997 (vmnet-dhcpd) [ 28.076000] /dev/vmnet: port on hub 1 successfully opened [ 28.084000] /dev/vmnet: open called by PID 6017 (vmnet-netifup) [ 28.084000] /dev/vmnet: hub 8 does not exist, allocating memory. [ 28.084000] /dev/vmnet: port on hub 8 successfully opened [ 28.268000] /dev/vmnet: open called by PID 6021 (vmnet-dhcpd) [ 28.268000] /dev/vmnet: port on hub 8 successfully opened [ 28.356000] /dev/vmnet: open called by PID 6035 (vmnet-natd) [ 28.356000] /dev/vmnet: port on hub 8 successfully opened [ 57.104000] NET: Registered protocol family 17 [ 58.820000] wlan0: Initial auth_alg=0 [ 58.820000] wlan0: authenticate with AP 00:e0:98:fe:86:ed [ 59.020000] wlan0: authenticate with AP 00:e0:98:fe:86:ed [ 59.220000] wlan0: authenticate with AP 00:e0:98:fe:86:ed [ 59.420000] wlan0: authentication with AP 00:e0:98:fe:86:ed timed out [ 71.444000] wlan0: RX deauthentication from 00:e0:98:fe:86:ed (reason=7) [ 78.108000] bridge-wlan0: disabling the bridge [ 78.120000] bridge-wlan0: down [ 78.280000] bridge-wlan0: enabling the bridge [ 78.280000] bridge-wlan0: up [ 88.028000] wlan0: Initial auth_alg=0 [ 88.028000] wlan0: authenticate with AP 00:13:10:63:bf:d9 [ 88.032000] wlan0: RX authentication from 00:13:10:63:bf:d9 (alg=0 transaction=2 status=0) [ 88.032000] wlan0: authenticated [ 88.032000] wlan0: associate with AP 00:13:10:63:bf:d9 [ 88.036000] wlan0: RX AssocResp from 00:13:10:63:bf:d9 (capab=0x421 status=0 aid=5) [ 88.036000] wlan0: associated [ 111.036000] NET: Registered protocol family 10 [ 111.036000] lo: Disabled Privacy Extensions [ 111.036000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 121.892000] vmnet8: no IPv6 routers present [ 121.904000] wlan0: no IPv6 routers present [ 121.916000] vmnet1: no IPv6 routers present [ 538.672000] irq 21: nobody cared (try booting with the "irqpoll" option) [ 538.672000] [<c015b594>] __report_bad_irq+0x24/0x80 [ 538.672000] [<c015b852>] note_interrupt+0x262/0x2a0 [ 538.672000] [<f88b36c2>] usb_hcd_irq+0x22/0x60 [usbcore] [ 538.672000] [<c015aab0>] handle_IRQ_event+0x30/0x60 [ 538.672000] [<c015c23b>] handle_fasteoi_irq+0xbb/0xf0 [ 538.672000] [<c0106b1b>] do_IRQ+0x3b/0x70 [ 538.672000] [<c013eb4b>] enqueue_hrtimer+0x6b/0x110 [ 538.672000] [<c0105223>] common_interrupt+0x23/0x30 [ 538.672000] [<c013007b>] sys_capset+0x12b/0x2e0 [ 538.672000] [<f886699a>] acpi_processor_idle+0x24f/0x425 [processor] [ 538.672000] [<f886674b>] acpi_processor_idle+0x0/0x425 [processor] [ 538.672000] [<c0102413>] cpu_idle+0x53/0xe0 [ 538.672000] [<c03e3a85>] start_kernel+0x325/0x3b0 [ 538.672000] [<c03e31f0>] unknown_bootoption+0x0/0x260 [ 538.672000] ======================= [ 538.672000] handlers: [ 538.672000] [<f88b36a0>] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 538.672000] Disabling IRQ #21 [ 1638.112000] wlan0: No ProbeResp from current AP 00:13:10:63:bf:d9 - assume out of range [ 1674.132000] bridge-wlan0: disabling the bridge [ 1674.148000] bridge-wlan0: down [ 1807.192000] bridge-wlan0: enabling the bridge [ 1807.192000] bridge-wlan0: up [ 1807.192000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9017.056000] Monitor-Mwait will be used to enter C-3 state [10423.912000] bridge-wlan0: disabling the bridge [10423.928000] bridge-wlan0: down [10424.220000] ACPI: PCI interrupt for device 0000:00:19.0 disabled [10426.324000] ACPI: PCI interrupt for device 0000:03:00.0 disabled [10428.244000] PM: suspend-to-disk mode set to 'shutdown' [10428.244000] swsusp: Basic memory bitmaps created [10428.244000] Stopping tasks ... done. [10429.088000] Shrinking memory... done (127488 pages freed) [10432.612000] Freed 509952 kbytes in 3.52 seconds (144.87 MB/s) [10432.612000] Suspending console(s) [10432.816000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10432.852000] usb_device usbdev7.1: PM: suspend 0->1, parent usb7 already 2 [10432.852000] usb_endpoint usbdev7.1_ep81: PM: suspend 0->1, parent 7-0:1.0 already 2 [10432.852000] hub 7-0:1.0: PM: suspend 2->1, parent usb7 already 2 [10432.852000] usb_endpoint usbdev7.1_ep00: PM: suspend 0->1, parent usb7 already 2 [10432.852000] usb_device usbdev6.1: PM: suspend 0->1, parent usb6 already 2 [10432.852000] usb_endpoint usbdev6.1_ep81: PM: suspend 0->1, parent 6-0:1.0 already 2 [10432.852000] hub 6-0:1.0: PM: suspend 2->1, parent usb6 already 2 [10432.852000] usb_endpoint usbdev6.1_ep00: PM: suspend 0->1, parent usb6 already 2 [10432.852000] usb_device usbdev5.1: PM: suspend 0->1, parent usb5 already 2 [10432.852000] usb_endpoint usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2 [10432.852000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2 [10432.852000] usb_endpoint usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2 [10432.852000] usb_device usbdev4.1: PM: suspend 0->1, parent usb4 already 2 [10432.852000] usb_endpoint usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2 [10432.852000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2 [10432.852000] usb_endpoint usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2 [10432.852000] usb_device usbdev2.1: PM: suspend 0->1, parent usb2 already 2 [10432.852000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 [10432.852000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 [10432.852000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 [10432.852000] usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2 [10432.852000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [10432.852000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [10432.852000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [10432.852000] ACPI: PCI interrupt for device 0000:15:00.2 disabled [10432.888000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [10432.888000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [10432.904000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [10432.904000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [10432.904000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [10432.916000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [10432.932000] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [10432.948000] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [10432.948000] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [10432.948000] Disabling non-boot CPUs ... [10433.064000] CPU 1 is now offline [10433.064000] SMP alternatives: switching to UP code [10433.064000] CPU1 is down [10433.064000] PM: snapshotting memory. [10433.064000] swsusp: critical section: [10433.064000] swsusp: Need to copy 124999 pages [10433.064000] swsusp: Normal pages needed: 14793 + 1024 + 40, available pages: 214579 [10433.064000] PM: Image restored successfully. [10433.064000] Enabling non-boot CPUs ... [10433.076000] SMP alternatives: switching to SMP code [10433.076000] Booting processor 1/1 eip 3000 [10433.084000] Initializing CPU#1 [10433.164000] Calibrating delay using timer specific routine.. 3989.64 BogoMIPS (lpj=7979281) [10433.164000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 [10433.164000] monitor/mwait feature present. [10433.164000] CPU: L1 I cache: 32K, L1 D cache: 32K [10433.164000] CPU: L2 cache: 4096K [10433.164000] CPU: Physical Processor ID: 0 [10433.164000] CPU: Processor Core ID: 1 [10433.164000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 [10433.164000] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [10433.164000] CPU1 is up [10433.164000] Switched to high resolution mode on CPU 1 [10433.164000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [10433.164000] PM: Writing back config space on device 0000:00:19.0 at offset 1 (was 100100, writing 100103) [10433.164000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 17 [10433.164000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [10433.164000] usb usb3: root hub lost power or was reset [10433.164000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18 [10433.164000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [10433.164000] usb usb4: root hub lost power or was reset [10433.180000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19 [10433.180000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [10433.180000] usb usb1: root hub lost power or was reset [10433.184000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [10433.200000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [10433.200000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22 [10433.200000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [10433.276000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [10433.276000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [10433.276000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [10433.276000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [10433.276000] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [10433.276000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [10433.276000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [10433.276000] usb usb5: root hub lost power or was reset [10433.276000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 [10433.276000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [10433.276000] usb usb6: root hub lost power or was reset [10433.276000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23 [10433.276000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [10433.276000] usb usb7: root hub lost power or was reset [10433.292000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21 [10433.292000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [10433.292000] usb usb2: root hub lost power or was reset [10433.296000] ehci_hcd 0000:00:1d.7: debug port 1 [10433.296000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [10433.296000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [10433.296000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b80001, writing 2b80005) [10433.296000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [10433.296000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [10433.296000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100106, writing 40100102) [10433.296000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 780010a, writing 580010a) [10433.296000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 824000, writing 82a800) [10433.312000] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8101000) [10433.312000] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) [10433.312000] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) [10433.364000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4] [10433.388000] PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) [10433.388000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 23 [10433.500000] ata1.00: configured for UDMA/100 [10433.500000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [10433.500000] sd 0:0:0:0: [sda] Write Protect is off [10433.500000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [10433.500000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [10433.956000] ata2.00: configured for UDMA/33 [10434.304000] usb_endpoint usbdev3.2_ep00: PM: resume from 0, parent 3-1 still 1 [10434.304000] hci_usb 3-1:1.0: PM: resume from 1, parent 3-1 still 1 [10434.304000] usb_endpoint usbdev3.2_ep81: PM: resume from 0, parent 3-1:1.0 still 1 [10434.304000] usb_endpoint usbdev3.2_ep82: PM: resume from 0, parent 3-1:1.0 still 1 [10434.304000] usb_endpoint usbdev3.2_ep02: PM: resume from 0, parent 3-1:1.0 still 1 [10434.304000] hci_usb 3-1:1.1: PM: resume from 1, parent 3-1 still 1 [10434.304000] usb 3-1:1.2: PM: resume from 1, parent 3-1 still 1 [10434.304000] usb_endpoint usbdev3.2_ep84: PM: resume from 0, parent 3-1:1.2 still 1 [10434.304000] usb_endpoint usbdev3.2_ep04: PM: resume from 0, parent 3-1:1.2 still 1 [10434.304000] usb 3-1:1.3: PM: resume from 1, parent 3-1 still 1 [10434.304000] usb_device usbdev3.2: PM: resume from 0, parent 3-1 still 1 [10434.304000] usb_endpoint usbdev3.3_ep00: PM: resume from 0, parent 3-2 still 1 [10434.304000] usb 3-2:1.0: PM: resume from 1, parent 3-2 still 1 [10434.304000] usb_endpoint usbdev3.3_ep81: PM: resume from 0, parent 3-2:1.0 still 1 [10434.304000] usb_endpoint usbdev3.3_ep02: PM: resume from 0, parent 3-2:1.0 still 1 [10434.304000] usb_endpoint usbdev3.3_ep83: PM: resume from 0, parent 3-2:1.0 still 1 [10434.304000] usb_device usbdev3.3: PM: resume from 0, parent 3-2 still 1 [10434.304000] sd 0:0:0:0: [sda] Starting disk [10434.364000] usb_endpoint usbdev3.2_ep83: PM: resume from 0, parent 3-1:1.1 still 1 [10434.364000] usb_endpoint usbdev3.2_ep03: PM: resume from 0, parent 3-1:1.1 still 1 [10434.364000] bluetooth hci0: PM: resume from 0, parent 3-1:1.0 still 1 [10437.192000] Restarting tasks ... done. [10437.232000] swsusp: Basic memory bitmaps freed [10437.676000] usb 3-1: USB disconnect, address 2 [10438.168000] usb 3-1: new full speed USB device using uhci_hcd and address 4 [10438.340000] usb 3-1: configuration #1 chosen from 1 choice [10438.344000] usb 3-2: USB disconnect, address 3 [10438.584000] usb 3-2: new full speed USB device using uhci_hcd and address 5 [10438.748000] usb 3-2: configuration #1 chosen from 1 choice [10442.364000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [10442.364000] Copyright (c) 1999-2006 Intel Corporation. [10442.364000] PCI: Enabling device 0000:00:19.0 (0000 -> 0003) [10442.364000] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 17 [10442.364000] PCI: Setting latency timer of device 0000:00:19.0 to 64 [10442.392000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:25:12:3f:ae [10442.484000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [10442.740000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [10442.740000] iwl4965: Copyright(c) 2003-2007 Intel Corporation [10442.740000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22 [10442.740000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [10442.740000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [10443.104000] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [10443.104000] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [10444.800000] input: Power Button (FF) as /class/input/input8 [10444.800000] ACPI: Power Button (FF) [PWRF] [10444.800000] input: Lid Switch as /class/input/input9 [10444.800000] ACPI: Lid Switch [LID] [10444.800000] input: Sleep Button (CM) as /class/input/input10 [10444.800000] ACPI: Sleep Button (CM) [SLPB] [10444.896000] ACPI: Thermal Zone [THM0] (38 C) [10444.896000] ACPI: Thermal Zone [THM1] (40 C) [10444.996000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [10444.996000] thinkpad_acpi: http://ibm-acpi.sf.net/ [10444.996000] thinkpad_acpi: ThinkPad EC firmware 7KHT22WW-1.06 [10445.000000] thinkpad_acpi: another device driver is already handling bay events [10445.000000] thinkpad_acpi: disabling subdriver bay [10445.044000] ACPI: AC Adapter [AC] (on-line) [10445.072000] ACPI: Battery Slot [BAT0] (battery present) [10564.280000] bridge-wlan0: enabling the bridge [10564.280000] bridge-wlan0: up [10564.280000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [11111.944000] bridge-wlan0: disabling the bridge [11111.960000] bridge-wlan0: down [11112.272000] bridge-wlan0: enabling the bridge [11112.272000] bridge-wlan0: up [11112.272000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [11174.816000] bridge-wlan0: disabling the bridge [11174.836000] bridge-wlan0: down [11174.864000] bridge-wlan0: enabling the bridge [11174.864000] bridge-wlan0: up [11174.864000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [11294.028000] bridge-wlan0: disabling the bridge [11294.040000] bridge-wlan0: down [11294.136000] ADDRCONF(NETDEV_UP): eth0: link is not ready [11294.160000] bridge-wlan0: enabling the bridge [11294.160000] bridge-wlan0: up [11294.160000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [11295.008000] bridge-wlan0: disabling the bridge [11295.020000] bridge-wlan0: down [11301.388000] bridge-wlan0: enabling the bridge [11301.388000] bridge-wlan0: up [11301.388000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [11312.548000] bridge-wlan0: disabling the bridge [11312.560000] bridge-wlan0: down [11312.628000] bridge-wlan0: enabling the bridge [11312.628000] bridge-wlan0: up [11312.628000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [11314.348000] wlan0: Initial auth_alg=0 [11314.348000] wlan0: authenticate with AP 00:1a:70:69:f1:28 [11314.348000] wlan0: Initial auth_alg=0 [11314.348000] wlan0: authenticate with AP 00:1a:70:69:f1:28 [11314.348000] wlan0: Initial auth_alg=0 [11314.348000] wlan0: authenticate with AP 00:1a:70:69:f1:28 [11314.356000] wlan0: RX authentication from 00:1a:70:69:f1:28 (alg=0 transaction=2 status=0) [11314.356000] wlan0: authenticated [11314.356000] wlan0: associate with AP 00:1a:70:69:f1:28 [11314.356000] wlan0: authentication frame received from 00:1a:70:69:f1:28, but not in authenticate state - ignored [11314.356000] wlan0: authentication frame received from 00:1a:70:69:f1:28, but not in authenticate state - ignored [11314.360000] wlan0: RX AssocResp from 00:1a:70:69:f1:28 (capab=0x1 status=0 aid=2) [11314.360000] wlan0: associated [11314.364000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [11330.768000] wlan0: no IPv6 routers present ** Affects: knetworkmanager (Ubuntu) Importance: Undecided Status: New -- Gutsy wlan0: link is not ready https://bugs.launchpad.net/bugs/175023 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for knetworkmanager in ubuntu. -- kubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
