** Description changed:

  Binary package hint: k3b
  
  After Burning a DVD the drive fails to respond, the OS can no longer
  access the drive, to eject, read, etc. It is no longer listed in
  cdrecord -scanbus, and so forth. This does not happen when burning a DVD
  with Brasero... Seems someone else had a similar problem
  http://www.timhardy.net/wordpress/bytopic/howto/ and was able to
  establish a work-a-round, I have not been able to verify this the
  directions are a bit vague.
  
  Description:    Ubuntu 8.04.1
  
  k3b:
    Installed: 1.0.4-2ubuntu4
  
  Jul 19 22:38:30 sponix-desktop syslogd 1.5.0#1ubuntu1: restart.
  Jul 19 22:55:11 sponix-desktop kernel: [ 8899.618030]          cdb 28 00 00 
00 00 10 00 00  01 00 00 00 00 00 00 00
  Jul 19 22:55:11 sponix-desktop kernel: [ 8899.618031]          res 
40/00:02:00:48:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  Jul 19 22:55:17 sponix-desktop kernel: [ 8902.163838] ata4: port is slow to 
respond, please be patient (Status 0xd0)
  Jul 19 22:55:21 sponix-desktop kernel: [ 8904.402328] ata4: device not ready 
(errno=-16), forcing hardreset
  Jul 19 22:55:21 sponix-desktop kernel: [ 8904.402335] ata4: hard resetting 
link
  Jul 19 22:55:27 sponix-desktop kernel: [ 8907.026670] ata4: port is slow to 
respond, please be patient (Status 0x80)
  Jul 19 22:55:31 sponix-desktop kernel: [ 8909.184761] ata4: hard resetting 
link
  Jul 19 22:55:37 sponix-desktop kernel: [ 8911.809084] ata4: port is slow to 
respond, please be patient (Status 0x80)
  Jul 19 22:55:42 sponix-desktop kernel: [ 8913.966706] ata4: hard resetting 
link
  Jul 19 22:55:47 sponix-desktop kernel: [ 8916.591037] ata4: port is slow to 
respond, please be patient (Status 0x80)
  Jul 19 22:56:17 sponix-desktop kernel: [ 8931.278603] ata4: limiting SATA 
link speed to 1.5 Gbps
  Jul 19 22:56:17 sponix-desktop kernel: [ 8931.278606] ata4: hard resetting 
link
  Jul 19 22:56:22 sponix-desktop kernel: [ 8933.663156] ata4.00: disabled
  Jul 19 22:56:22 sponix-desktop kernel: [ 8933.663169] ata4: EH complete
  
- sudo lspci -v
- 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0
+ lspci -vvnn
+ 00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller 
[10de:03ea] (rev a1)
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
+               Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
+               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
+               Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
+               Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
+               Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
DwFcInEn- LWO=8bit DwFcOutEn-
+               Revision ID: 1.03
+               Link Frequency 0: 1.0GHz
+               Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
+               Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
+               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
+               Link Frequency 1: 200MHz
+               Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
+               Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
+               Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
+               Prefetchable memory behind bridge Upper: 00-00
+               Bus Number: 00
        Capabilities: [dc] HyperTransport: MSI Mapping
  
- 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0
- 
- 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: 66MHz, fast devsel, IRQ 255
-       I/O ports at fc00 [size=64]
-       I/O ports at 1c00 [size=64]
-       I/O ports at f400 [size=64]
-       Capabilities: [44] Power Management version 2
- 
- 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: 66MHz, fast devsel
- 
- 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 
(prog-if 10 [OHCI])
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
-       Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
-       Capabilities: [44] Power Management version 2
- 
- 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 
(prog-if 20 [EHCI])
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
-       Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
+ 00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] 
(rev a2)
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0
+ 
+ 00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Interrupt: pin A routed to IRQ 255
+       Region 0: I/O ports at fc00 [size=64]
+       Region 4: I/O ports at 1c00 [size=64]
+       Region 5: I/O ports at f400 [size=64]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 
+ 00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller 
[10de:03f5] (rev a2)
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+ 
+ 00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller 
[10de:03f1] (rev a3) (prog-if 10 [OHCI])
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (750ns min, 250ns max)
+       Interrupt: pin A routed to IRQ 16
+       Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 
+ 00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller 
[10de:03f2] (rev a3) (prog-if 20 [EHCI])
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (750ns min, 250ns max)
+       Interrupt: pin B routed to IRQ 17
+       Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port
        Capabilities: [80] Power Management version 2
- 
- 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 
[Subtractive decode])
-       Flags: bus master, 66MHz, fast devsel, latency 0
+               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 
+ 00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] 
(rev a1) (prog-if 01 [Subtractive decode])
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fd800000-fd8fffff
        Prefetchable memory behind bridge: fdf00000-fdffffff
-       Capabilities: [b8] Subsystem: nVidia Corporation Unknown device cb84
+       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
+       BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+       Capabilities: [b8] Subsystem: nVidia Corporation Unknown device 
[10de:cb84]
        Capabilities: [8c] HyperTransport: MSI Mapping
  
- 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
-       Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
-       Capabilities: [44] Power Management version 2
+ 00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio 
[10de:03f0] (rev a2)
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (500ns min, 1250ns max)
+       Interrupt: pin B routed to IRQ 17
+       Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 
Enable-
+               Address: 0000000000000000  Data: 0000
+               Masking: 00000000  Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping
  
- 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a 
[Master SecP PriP])
-       Subsystem: Unknown device f03c:2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0
-       [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] 
[size=8]
-       [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] 
[size=1]
-       [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] 
[size=8]
-       [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] 
[size=1]
-       I/O ports at f000 [size=16]
-       Capabilities: [44] Power Management version 2
- 
- 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 220
-       Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
-       I/O ports at ec00 [size=8]
-       Capabilities: [44] Power Management version 2
+ 00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev 
a2) (prog-if 8a [Master SecP PriP])
+       Subsystem: Unknown device [f03c:2a61]
+       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (750ns min, 250ns max)
+       Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[disabled] [size=8]
+       Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[disabled] [size=1]
+       Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[disabled] [size=8]
+       Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[disabled] [size=1]
+       Region 4: I/O ports at f000 [size=16]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 
+ 00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (250ns min, 5000ns max)
+       Interrupt: pin A routed to IRQ 220
+       Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
+       Region 1: I/O ports at ec00 [size=8]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 
Enable+
+               Address: 00000000fee0300c  Data: 4132
+               Masking: 000000fe  Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping
  
- 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 
(prog-if 85 [Master SecO PriO])
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
-       I/O ports at 09f0 [size=8]
-       I/O ports at 0bf0 [size=4]
-       I/O ports at 0970 [size=8]
-       I/O ports at 0b70 [size=4]
-       I/O ports at d800 [size=16]
-       Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
-       Capabilities: [44] Power Management version 2
+ 00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller 
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (750ns min, 250ns max)
+       Interrupt: pin A routed to IRQ 21
+       Region 0: I/O ports at 09f0 [size=8]
+       Region 1: I/O ports at 0bf0 [size=4]
+       Region 2: I/O ports at 0970 [size=8]
+       Region 3: I/O ports at 0b70 [size=4]
+       Region 4: I/O ports at d800 [size=16]
+       Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 
Enable-
+               Address: 0000000000000000  Data: 0000
        Capabilities: [cc] HyperTransport: MSI Mapping
  
- 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 
(prog-if 85 [Master SecO PriO])
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
-       I/O ports at 09e0 [size=8]
-       I/O ports at 0be0 [size=4]
-       I/O ports at 0960 [size=8]
-       I/O ports at 0b60 [size=4]
-       I/O ports at c400 [size=16]
-       Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
-       Capabilities: [44] Power Management version 2
+ 00:08.1 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller 
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0 (750ns min, 250ns max)
+       Interrupt: pin B routed to IRQ 21
+       Region 0: I/O ports at 09e0 [size=8]
+       Region 1: I/O ports at 0be0 [size=4]
+       Region 2: I/O ports at 0960 [size=8]
+       Region 3: I/O ports at 0b60 [size=4]
+       Region 4: I/O ports at c400 [size=16]
+       Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
+       Capabilities: [44] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 
Enable-
+               Address: 0000000000000000  Data: 0000
        Capabilities: [cc] HyperTransport: MSI Mapping
  
- 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 
(prog-if 00 [Normal decode])
-       Flags: bus master, fast devsel, latency 0
+ 00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge 
[10de:03e8] (rev a2) (prog-if 00 [Normal decode])
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fde00000-fdefffff
        Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
-       Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
+       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
+       BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+       Capabilities: [40] Subsystem: nVidia Corporation Unknown device 
[10de:0000]
        Capabilities: [48] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 
Enable+
+               Address: 00000000fee0300c  Data: 41a9
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0
- 
- 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 
(prog-if 00 [Normal decode])
-       Flags: bus master, fast devsel, latency 0
+               Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
+               Device: Latency L0s <64ns, L1 <1us
+               Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
+               Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
+               Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
+               Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
+               Link: Latency L0s <512ns, L1 <4us
+               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
+               Link: Speed 2.5Gb/s, Width x16
+               Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
+               Slot: Number 1, PowerLimit 75.000000
+               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
+               Slot: AttnInd Off, PwrInd On, Power-
+               Root: Correctable- Non-Fatal- Fatal- PME-
+ 
+ 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge 
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fdc00000-fdcfffff
        Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
-       Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
+       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
+       BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+       Capabilities: [40] Subsystem: nVidia Corporation Unknown device 
[10de:0000]
        Capabilities: [48] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 
Enable+
+               Address: 00000000fee0300c  Data: 41b1
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0
- 
- 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 
(prog-if 00 [Normal decode])
-       Flags: bus master, fast devsel, latency 0
+               Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
+               Device: Latency L0s <64ns, L1 <1us
+               Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
+               Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
+               Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
+               Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
+               Link: Latency L0s <512ns, L1 <4us
+               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
+               Link: Speed 2.5Gb/s, Width x1
+               Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
+               Slot: Number 2, PowerLimit 10.000000
+               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
+               Slot: AttnInd Off, PwrInd On, Power-
+               Root: Correctable- Non-Fatal- Fatal- PME-
+ 
+ 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge 
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00008000-00008fff
        Memory behind bridge: fda00000-fdafffff
        Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
-       Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
+       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
+       BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+       Capabilities: [40] Subsystem: nVidia Corporation Unknown device 
[10de:0000]
        Capabilities: [48] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 
Enable+
+               Address: 00000000fee0300c  Data: 41b9
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0
- 
- 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 
(rev a2) (prog-if 00 [VGA controller])
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
-       Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
-       Memory at e0000000 (64-bit, prefetchable) [size=256M]
-       Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
+               Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
+               Device: Latency L0s <64ns, L1 <1us
+               Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
+               Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
+               Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
+               Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
+               Link: Latency L0s <512ns, L1 <4us
+               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
+               Link: Speed 2.5Gb/s, Width x1
+               Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
+               Slot: Number 3, PowerLimit 10.000000
+               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
+               Slot: AttnInd Off, PwrInd On, Power-
+               Root: Correctable- Non-Fatal- Fatal- PME-
+ 
+ 00:0d.0 VGA compatible controller [0300]: nVidia Corporation GeForce 6100 
nForce 430 [10de:03d0] (rev a2) (prog-if 00 [VGA controller])
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+       Latency: 0
+       Interrupt: pin A routed to IRQ 16
+       Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
+       Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
+       Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
- 
- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
-       Flags: fast devsel
+               Address: 0000000000000000  Data: 0000
+ 
+ 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
- 
- 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
-       Flags: fast devsel
- 
- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
-       Flags: fast devsel
- 
- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
-       Flags: fast devsel
+               !!! Possibly incomplete decoding
+               Command: WarmRst+ DblEnd-
+               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
+               Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
+               Revision ID: 1.02
+ 
+ 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] Address Map [1022:1101]
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+ 
+ 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] DRAM Controller [1022:1102]
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
+ 
+ 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Capabilities: [f0] #0f [0010]
  
- 01:05.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 
10/100 (rev 11)
-       Subsystem: ADMtek Unknown device 0574
-       Flags: bus master, medium devsel, latency 255, IRQ 19
-       I/O ports at bc00 [size=256]
-       Memory at fd8ff000 (32-bit, non-prefetchable) [size=1K]
+ 01:05.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast 
Ethernet 10/100 [1317:0985] (rev 11)
+       Subsystem: ADMtek Unknown device [1317:0574]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
+       Latency: 255 (63750ns min, 63750ns max), Cache Line Size: 64 bytes
+       Interrupt: pin A routed to IRQ 20
+       Region 0: I/O ports at bc00 [size=256]
+       Region 1: Memory at fd8ff000 (32-bit, non-prefetchable) [size=1K]
        [virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
- 
- 01:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
Controller (rev 80) (prog-if 10 [OHCI])
-       Subsystem: Hewlett-Packard Company Unknown device 2a61
-       Flags: bus master, stepping, medium devsel, latency 64, IRQ 21
-       Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
-       I/O ports at b800 [size=128]
+               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 
+ 01:09.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host 
Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
+       Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
+       Latency: 64 (8000ns max), Cache Line Size: 64 bytes
+       Interrupt: pin A routed to IRQ 18
+       Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
+       Region 1: I/O ports at b800 [size=128]
        Capabilities: [50] Power Management version 2
+               Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2+,D3hot+,D3cold+)
+               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 
  
  
  ProblemType: Bug
  Architecture: i386
  Date: Sat Jul 19 22:24:51 2008
  DistroRelease: Ubuntu 8.04
  NonfreeKernelModules: nvidia
  Package: k3b 1.0.4-2ubuntu4
  PackageArchitecture: i386
  ProcEnviron:
   SHELL=/bin/bash
   PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
   LANG=en_US.UTF-8
  SourcePackage: k3b
  Uname: Linux 2.6.24-19-generic i686

-- 
k3b after burning a DVD the drive fails to respond
https://bugs.launchpad.net/bugs/250206
You received this bug notification because you are a member of Kubuntu
Team, which is subscribed to k3b in ubuntu.

-- 
kubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs

Reply via email to