Some comments about encryption. Diff comments:
> > === added file 'testcases/image/Full disk install encryption BIOS internet' > --- testcases/image/Full disk install encryption BIOS internet > 1970-01-01 00:00:00 +0000 > +++ testcases/image/Full disk install encryption BIOS internet > 2019-10-12 04:52:34 +0000 > @@ -0,0 +1,32 @@ > +<em>Lubuntu QA-test: Full disk install, encryption, BIOS and internet</em> > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > + > +<dl> > + <dt>Boot up the image and select your language</dt> > + <dd>The system boots properly and loads the language selection > menu</dd> > + <dt>Press enter over the "Start FAMILY" text</dt> > + <dd>The system should boot to the live desktop</dd> > + <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the > installer</dt> > + <dt>Select your language/localization in the dropdown menu and click > "Next"</dt> > + <dd>The installer should be localized in your language</dd> > + <dt>Select your timezone and click "Next"</dt> > + <dd>A map should appear allowing you to select your timezone, and if > the internet is connected, should already be accurate</dd> > + <dt>Select your keyboard layout and click "Next"</dt> > + <dd>Test the keyboard layout in the given box, which should be set > correctly</dd> > + <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter > details and click "Next"</dt> > + <dd>Please ensure you see BIOS listed besides your drive. If you see > EFI it's covered in another testcase</dd> > + <dd>A partition layout should be shown which uses all disk space, > and the bootloader should be installed to the correct disk</dd> > + <dd>After ticking the "Encrypt system" radio box, please enter (and > confirm) passphrase</dd> Shouldn't this be followed by a comment to verify that "encrypt system" is checked? > + <dd>Confirm Boot Loader location is correct</dd> > + <dd>If "Erase disk" does not show, your target device has a mounted > partition. Please close installer, umount your partitions (possibly a swap > partition that was mounted on boot), and return to the 'click the "Install > FAMILY XX.YY" icon step'</dd> > + <dt>Enter details about the main system user and click "Next"</dt> > + <dd>All details (name, username box-name etc) should be correctly > filled in</dd> > + <dt>Confirm the details you entered throughout the install are accurate > and click "Install", then "Install now"</dt> > + <dd>All details (location, keyboard, partitions etc) should match > what you entered</dd> > + <dd>The slideshow should correctly display, and when the > installation is done, a menu should display asking you to confirm your > settings</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>You should be required to enter the encryption passphrase before > login</dd> > + <dd>The system boots properly and loads into FAMILY showing the > username you entered</dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> > > === added file 'testcases/image/Full disk install encryption BIOS offline' > --- testcases/image/Full disk install encryption BIOS offline 1970-01-01 > 00:00:00 +0000 > +++ testcases/image/Full disk install encryption BIOS offline 2019-10-12 > 04:52:34 +0000 > @@ -0,0 +1,39 @@ > +<em>Lubuntu QA-test: Full disk install, encryption, BIOS and no internet</em> > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > +<em>Please ensure you have no internet for this test (unplug cable or > disable if VM)</em> > + > +<dl> > + <dt>Boot up the image and select your language</dt> > + <dd>The system boots properly and loads the language selection > menu</dd> > + <dt>Press enter over the "Start FAMILY" text</dt> > + <dd>The system should boot to the live desktop</dd> > + <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the > installer</dt> > + <dd>You should note a prominent warning ""The system is not > connected to the Internet"</dd> > + <dt>Select your language/localization in the dropdown menu and click > "Next"</dt> > + <dd>The installer should be localized in your language</dd> > + <dt>Select your timezone and click "Next"</dt> > + <dd>A map should appear allowing you to select your timezone, and if > the internet was connected, it should already be accurate. In this case > inaccurate is expected.</dd> > + <dd>Select Region from Region dropdown</dd> > + <dd>Select Zone from Zone dropdown</dd> > + <dd>Please note system language if it's not correct</dd> > + <dd>Please note numbers and dates locale if it's not correct</dd> > + <dt>Select your keyboard layout and click "Next"</dt> > + <dd>Test the keyboard layout in the given box, which should be set > correctly</dd> > + <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter > details and click "Next"</dt> > + <dd>If "Erase disk" does not show, your target device has a mounted > partition. Please close installer, umount your partitions (possibly a swap > partition that was mounted on boot), and return to the 'click the "Install > FAMILY XX.YY" icon step'</dd> > + <dd>Please ensure you see BIOS listed besides your drive. If you see > EFI it's covered in another testcase</dd> > + <dd>A partition layout should be shown which uses all disk space, > and the bootloader should be installed to the correct disk</dd> > + <dd>After ticking the "Encrypt system" radio box, please enter (and > confirm) passphrase</dd> > + <dd>Ensure "Encrypt system" checkbox is not ticked</dd> I think you mean ensure "Encrypt system" *is* checked? > + <dd>Confirm Boot Loader location is correct</dd> > + <dt>Enter details about the main system user and click "Next"</dt> > + <dd>All details (name, username box-name etc) should be correctly > filled in</dd> > + <dt>Confirm the details you entered throughout the install are accurate > and click "Install", then "Install now"</dt> > + <dd>All details (location, keyboard, partitions etc) should match > what you entered</dd> > + <dd>The slideshow should correctly display, and when the > installation is done, a menu should display asking you to confirm your > settings</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>You should be required to enter the encryption passphrase before > login</dd> > + <dd>The system boots properly and loads into FAMILY showing the > username you entered</dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> > > === added file 'testcases/image/Full disk install encryption EFI internet' > --- testcases/image/Full disk install encryption EFI internet 1970-01-01 > 00:00:00 +0000 > +++ testcases/image/Full disk install encryption EFI internet 2019-10-12 > 04:52:34 +0000 > @@ -0,0 +1,32 @@ > +<em>Lubuntu QA-test: Full disk install, encryption, EFI and internet</em> > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > + > +<dl> > + <dt>Boot up the image and select your language</dt> > + <dd>The system boots properly and loads the language selection > menu</dd> > + <dt>Press enter over the "Start FAMILY" text</dt> > + <dd>The system should boot to the live desktop</dd> > + <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the > installer</dt> > + <dt>Select your language/localization in the dropdown menu and click > "Next"</dt> > + <dd>The installer should be localized in your language</dd> > + <dt>Select your timezone and click "Next"</dt> > + <dd>A map should appear allowing you to select your timezone, and if > the internet is connected, should already be accurate</dd> > + <dt>Select your keyboard layout and click "Next"</dt> > + <dd>Test the keyboard layout in the given box, which should be set > correctly</dd> > + <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter > details and click "Next"</dt> > + <dd>Please ensure you see EFI listed besides your drive. If you see > BIOS it's covered in another testcase</dd> > + <dd>A partition layout should be shown which uses all disk space, > and the bootloader should be installed to the correct disk</dd> > + <dd>After ticking the "Encrypt system" radio box, please enter (and > confirm) passphrase</dd> Shouldn't this be followed by a comment to verify that "encrypt system" is checked? > + <dd>Confirm Boot Loader location is correct</dd> > + <dd>If "Erase disk" does not show, your target device has a mounted > partition. Please close installer, umount your partitions (possibly a swap > partition that was mounted on boot), and return to the 'click the "Install > FAMILY XX.YY" icon step'</dd> > + <dt>Enter details about the main system user and click "Next"</dt> > + <dd>All details (name, username box-name etc) should be correctly > filled in</dd> > + <dt>Confirm the details you entered throughout the install are accurate > and click "Install", then "Install now"</dt> > + <dd>All details (location, keyboard, partitions etc) should match > what you entered</dd> > + <dd>The slideshow should correctly display, and when the > installation is done, a menu should display asking you to confirm your > settings</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>You should be required to enter the encryption passphrase before > login</dd> > + <dd>The system boots properly and loads into FAMILY showing the > username you entered</dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> > > === added file 'testcases/image/Full disk install encryption EFI offline' > --- testcases/image/Full disk install encryption EFI offline 1970-01-01 > 00:00:00 +0000 > +++ testcases/image/Full disk install encryption EFI offline 2019-10-12 > 04:52:34 +0000 > @@ -0,0 +1,39 @@ > +<em>Lubuntu QA-test: Full disk install, encryption, EFI and no internet</em> > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > +<em>Please ensure you have no internet for this test (unplug cable or > disable if VM)</em> > + > +<dl> > + <dt>Boot up the image and select your language</dt> > + <dd>The system boots properly and loads the language selection > menu</dd> > + <dt>Press enter over the "Start FAMILY" text</dt> > + <dd>The system should boot to the live desktop</dd> > + <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the > installer</dt> > + <dd>You should note a prominent warning ""The system is not > connected to the Internet"</dd> > + <dt>Select your language/localization in the dropdown menu and click > "Next"</dt> > + <dd>The installer should be localized in your language</dd> > + <dt>Select your timezone and click "Next"</dt> > + <dd>A map should appear allowing you to select your timezone, and if > the internet was connected, it should already be accurate. In this case > inaccurate is expected.</dd> > + <dd>Select Region from Region dropdown</dd> > + <dd>Select Zone from Zone dropdown</dd> > + <dd>Please note system language if it's not correct</dd> > + <dd>Please note numbers and dates locale if it's not correct</dd> > + <dt>Select your keyboard layout and click "Next"</dt> > + <dd>Test the keyboard layout in the given box, which should be set > correctly</dd> > + <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter > details and click "Next"</dt> > + <dd>If "Erase disk" does not show, your target device has a mounted > partition. Please close installer, umount your partitions (possibly a swap > partition that was mounted on boot), and return to the 'click the "Install > FAMILY XX.YY" icon step'</dd> > + <dd>Please ensure you see EFI listed besides your drive. If you see > BIOS it's covered in another testcase</dd> > + <dd>A partition layout should be shown which uses all disk space, > and the bootloader should be installed to the correct disk</dd> > + <dd>After ticking the "Encrypt system" radio box, please enter (and > confirm) passphrase</dd> > + <dd>Ensure "Encrypt system" checkbox is not ticked</dd> I think you mean ensure "Encrypt system" *is* checked? > + <dd>Confirm Boot Loader location is correct</dd> > + <dt>Enter details about the main system user and click "Next"</dt> > + <dd>All details (name, username box-name etc) should be correctly > filled in</dd> > + <dt>Confirm the details you entered throughout the install are accurate > and click "Install", then "Install now"</dt> > + <dd>All details (location, keyboard, partitions etc) should match > what you entered</dd> > + <dd>The slideshow should correctly display, and when the > installation is done, a menu should display asking you to confirm your > settings</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>You should be required to enter the encryption passphrase before > login</dd> > + <dd>The system boots properly and loads into FAMILY showing the > username you entered</dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> > > === added file 'testcases/image/Full disk install encryption SecureEFI > internet' > --- testcases/image/Full disk install encryption SecureEFI internet > 1970-01-01 00:00:00 +0000 > +++ testcases/image/Full disk install encryption SecureEFI internet > 2019-10-12 04:52:34 +0000 > @@ -0,0 +1,32 @@ > +<em>Lubuntu QA-test: Full disk install, encryption, Secure EFI and > internet</em> > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > + > +<dl> > + <dt>Boot up the image and select your language</dt> > + <dd>The system boots properly and loads the language selection > menu</dd> > + <dt>Press enter over the "Start FAMILY" text</dt> > + <dd>The system should boot to the live desktop</dd> > + <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the > installer</dt> > + <dt>Select your language/localization in the dropdown menu and click > "Next"</dt> > + <dd>The installer should be localized in your language</dd> > + <dt>Select your timezone and click "Next"</dt> > + <dd>A map should appear allowing you to select your timezone, and if > the internet is connected, should already be accurate</dd> > + <dt>Select your keyboard layout and click "Next"</dt> > + <dd>Test the keyboard layout in the given box, which should be set > correctly</dd> > + <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter > details and click "Next"</dt> > + <dd>Please ensure you see EFI listed besides your drive. If you see > BIOS it's covered in another testcase</dd> > + <dd>A partition layout should be shown which uses all disk space, > and the bootloader should be installed to the correct disk</dd> > + <dd>After ticking the "Encrypt system" radio box, please enter (and > confirm) passphrase</dd> Shouldn't this be followed by a comment to verify that "encrypt system" is checked? > + <dd>Confirm Boot Loader location is correct</dd> > + <dd>If "Erase disk" does not show, your target device has a mounted > partition. Please close installer, umount your partitions (possibly a swap > partition that was mounted on boot), and return to the 'click the "Install > FAMILY XX.YY" icon step'</dd> > + <dt>Enter details about the main system user and click "Next"</dt> > + <dd>All details (name, username box-name etc) should be correctly > filled in</dd> > + <dt>Confirm the details you entered throughout the install are accurate > and click "Install", then "Install now"</dt> > + <dd>All details (location, keyboard, partitions etc) should match > what you entered</dd> > + <dd>The slideshow should correctly display, and when the > installation is done, a menu should display asking you to confirm your > settings</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>You should be required to enter the encryption passphrase before > login</dd> > + <dd>The system boots properly and loads into FAMILY showing the > username you entered</dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> > > === added file 'testcases/image/Full disk install encryption SecureEFI > offline' > --- testcases/image/Full disk install encryption SecureEFI offline > 1970-01-01 00:00:00 +0000 > +++ testcases/image/Full disk install encryption SecureEFI offline > 2019-10-12 04:52:34 +0000 > @@ -0,0 +1,39 @@ > +<em>Lubuntu QA-test: Full disk install, encryption, Secure EFI and no > internet</em> > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > +<em>Please ensure you have no internet for this test (unplug cable or > disable if VM)</em> > + > +<dl> > + <dt>Boot up the image and select your language</dt> > + <dd>The system boots properly and loads the language selection > menu</dd> > + <dt>Press enter over the "Start FAMILY" text</dt> > + <dd>The system should boot to the live desktop</dd> > + <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the > installer</dt> > + <dd>You should note a prominent warning ""The system is not > connected to the Internet"</dd> > + <dt>Select your language/localization in the dropdown menu and click > "Next"</dt> > + <dd>The installer should be localized in your language</dd> > + <dt>Select your timezone and click "Next"</dt> > + <dd>A map should appear allowing you to select your timezone, and if > the internet was connected, it should already be accurate. In this case > inaccurate is expected.</dd> > + <dd>Select Region from Region dropdown</dd> > + <dd>Select Zone from Zone dropdown</dd> > + <dd>Please note system language if it's not correct</dd> > + <dd>Please note numbers and dates locale if it's not correct</dd> > + <dt>Select your keyboard layout and click "Next"</dt> > + <dd>Test the keyboard layout in the given box, which should be set > correctly</dd> > + <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter > details and click "Next"</dt> > + <dd>If "Erase disk" does not show, your target device has a mounted > partition. Please close installer, umount your partitions (possibly a swap > partition that was mounted on boot), and return to the 'click the "Install > FAMILY XX.YY" icon step'</dd> > + <dd>Please ensure you see EFI listed besides your drive. If you see > BIOS it's covered in another testcase</dd> > + <dd>A partition layout should be shown which uses all disk space, > and the bootloader should be installed to the correct disk</dd> > + <dd>After ticking the "Encrypt system" radio box, please enter (and > confirm) passphrase</dd> > + <dd>Ensure "Encrypt system" checkbox is not ticked</dd> I think you mean ensure "Encrypt system" *is* checked? > + <dd>Confirm Boot Loader location is correct</dd> > + <dt>Enter details about the main system user and click "Next"</dt> > + <dd>All details (name, username box-name etc) should be correctly > filled in</dd> > + <dt>Confirm the details you entered throughout the install are accurate > and click "Install", then "Install now"</dt> > + <dd>All details (location, keyboard, partitions etc) should match > what you entered</dd> > + <dd>The slideshow should correctly display, and when the > installation is done, a menu should display asking you to confirm your > settings</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>You should be required to enter the encryption passphrase before > login</dd> > + <dd>The system boots properly and loads into FAMILY showing the > username you entered</dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> -- https://code.launchpad.net/~guiverc/ubuntu-manual-tests/lubuntu-calamares/+merge/372039 Your team Ubuntu Testcase Admins is subscribed to branch lp:ubuntu-manual-tests. -- Mailing list: https://launchpad.net/~kubuntu-council Post to : [email protected] Unsubscribe : https://launchpad.net/~kubuntu-council More help : https://help.launchpad.net/ListHelp
