Review: Needs Information Thanks!
For 20.04 beta we had a bug which only appeared on the second boot. Should there be a step which tests that? I've added one other question below. (Can't actually approve this though - should ~ubuntu-release be a member of ~ubuntu-testcase?) Diff comments: > diff --git a/testcases/image/1716_Install (entire disk with ZFS) > b/testcases/image/1716_Install (entire disk with ZFS) > new file mode 100755 > index 0000000..4ae293c > --- /dev/null > +++ b/testcases/image/1716_Install (entire disk with ZFS) > @@ -0,0 +1,100 @@ > +<em>Proceed in your native language if you wish. Instructions will remain in > English</em> > + > +<dl> > + <dt>Boot up the image</dt> > + <dd>The system boots properly and loads the installer displaying > Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' > buttons</dd> > + <dt>Click on the release notes hyperlink to confirm that a browser > launches and you are taken to the release notes wiki page.</dt> > + <dt>Click on the Install FAMILY button</dt> > + <dd>The 'Keyboard Layout' screen appears</dd> > + <dd>The proposed keyboard corresponds with your keyboard</dd> > + <dt>Select your keyboard layout and click on continue</dt> > + <dd>The 'Updates and other software' screen is displayed</dd> > + <dt>On the screen 'Updates and other software', note the availability of > the following components</dt> > + <dd>Available options should represent the state of your system > accurately</dd> > + <dd> > + <ul> > + <li>(If network is available) Download updates while > installing FAMILY</li> > + <li>(If on a 'laptop') Is plugged to a power source</li> > + <li>Install third-party software ... option available</li> > + </ul> > + </dd> > + <dt>Click on the continue button</dt> > + <dd>The 'Installation type' screen is displayed</dd> > + <dt>Note the state of the 'Erase disk and install FAMILY' radio > button</dt> > + <dd>The 'Erase disk and install FAMILY' radio button is selected and > the 'Advanced features' button is active</dd> > + <dt>Click on the 'Advanced features...' button</dt> > + <dd>The 'Advanced features' dialog is displayed</dd> > + <dt>Check 'Erase disk and use ZFS'</dt> > + <dd>'Erase disk and use ZFS'</dd> > + <dt>Click on the 'OK' button</dt> > + <dd>The dialog closes and 'Erase disk and use ZFS'</dd> > + <dt>Click on the 'Install Now' button</dt> > + <dd>The 'Choose a security key' screen is displayed with the > 'Install now' button greyed out</dd> > + <dt>Enter a security key and type a different key into the 'confirm the > security key' input box</dt> > + <dd>The installer displays 'Passwords do not match'</dd> > + <dt>Enter a security key and type the same key into the 'confirm the > security key' input box</dt> > + <dd>The passwords are accepted and the 'Install Now' button can be > clicked</dd> > + <dt>Check 'Overwrite empty disk space' and click the 'Install Now' > button</dt> > + <dd>The screen advances</dd> > + <dt>If there is only one hard disk, skip to step 14 (On the 'Where are > you?' screen...). Otherwise, on the 'Installation type' screen verify that > the drive selected on the Select drive list corresponds to the drive on the > chart (e.g /dev/sda)</dt> > + <dd>Selected drive is displayed on the chart</dd> > + <dt>Verify that the full drive space is allocated</dt> > + <dd>Full drive space is allocated for installation</dd> > + <dt>Click on the Install Now button</dt> > + <dd>The 'Where are you?' screen is displayed</dd> > + <dt>If your system is connected to the network, note the preselected > timezone correspond with your timezone and the city indicated in the text box > </dt> > + <dd>The timezone and city displayed match your timezone and the main > city from your area</dd> > + <dt>Select your timezone, and click on the continue button</dt> > + <dd>The 'Who are you?' screen appears</dd> > + <dt>Input your initial user details and password (Note admin can not be > used - it is a dedicated Linux User)</dt> > + <dd>Name, username and password are accepted. Additionally, the > continue button is enabled</dd> > + <dt>Click on the continue button</dt> > + <dd>The 'Welcome to FAMILY ' slide is displayed</dd> > + <dd>The slideshow is entirely in your language</dd> > + <dt>Wait for the installer to finish</dt> > + <dd>An 'Installation Complete' dialog appears</dd> > + <dt>Click the Restart now button</dt> > + <dd>GUI is shut down, a prompt to remove media and press Enter > appears</dd> > + <dt>Remove the disc and press enter</dt> > + <dd>The machine is rebooted</dd> > + <dt>Allow the machine to reboot</dt> > + <dd>The system boots properly and loads into FAMILY</dd> > + <dd>Upon login, open a terminal, run the following commands and > verify it matches the output</dd> > + <dd><code>$ zfs mount > + rpool/ROOT/ubuntu_UUID / > + bpool/BOOT/ubuntu_UUID /boot > + rpool/USERDATA/root_0y7dio /root > + rpool/ROOT/ubuntu_UUID/srv /srv > + rpool/USERDATA/u_0y7dio /home/u > + rpool/ROOT/ubuntu_UUID/usr/local /usr/local > + rpool/ROOT/ubuntu_UUID/var/lib /var/lib > + rpool/ROOT/ubuntu_UUID/var/games /var/games > + rpool/ROOT/ubuntu_UUID/var/mail /var/mail > + rpool/ROOT/ubuntu_UUID/var/snap /var/snap > + rpool/ROOT/ubuntu_UUID/var/log /var/log > + rpool/ROOT/ubuntu_UUID/var/www /var/www > + rpool/ROOT/ubuntu_UUID/var/spool /var/spool > + rpool/ROOT/ubuntu_UUID/var/lib/AccountServices > /var/lib/AccountServices shouldn't this be /var/lib/AccountsService? > + rpool/ROOT/ubuntu_UUID/var/lib/NetworkManager > /var/lib/NetworkManager > + rpool/ROOT/ubuntu_UUID/var/lib/apt /var/lib/apt > + rpool/ROOT/ubuntu_UUID/var/lib/dpkg /var/lib/dpkg > + </code></dd> > + <dd><code>$ zsysctl show > + Name: rpool/ROOT/ubuntu_UUID > + ZSys: true > + Last Used: current > + History: > + - Name: rpool/ROOT/ubuntu_UUID@autozsys_SNAPID > + Created on: 2020-04-14 16:37:10 > + Users: > + - Name: root > + History: > + - rpool/USERDATA/root_0y7dio@autozsys_SNAPID (2020-04-14 > 16:37:10) > + - Name: u > + History: > + - rpool/USERDATA/u_0y7dio@autozsys_SNAPID (2020-04-14 > 16:37:10) > + - rpool/USERDATA/u_0y7dio@autozsys_SNAPID (2020-04-14 > 16:34:41) > + </code></dd> > +</dl> > +<strong>If all actions produce the expected results listed, please <a > href="results#add_result">submit</a> a 'passed' result. > + If an action fails, or produces an unexpected result, please <a > href="results#add_result">submit</a> a 'failed' result and <a > href="../../buginstructions">file a bug</a>. Please be sure to include the > bug number when you <a href="results#add_result">submit</a> your > result.</strong> -- https://code.launchpad.net/~ubuntu-testcase/ubuntu-manual-tests/+git/ubuntu-manual-tests/+merge/382229 Your team Ubuntu Testcase Admins is requested to review the proposed merge of ubuntu-manual-tests:advanced_features_dialog into ubuntu-manual-tests:master. -- Mailing list: https://launchpad.net/~kubuntu-council Post to : [email protected] Unsubscribe : https://launchpad.net/~kubuntu-council More help : https://help.launchpad.net/ListHelp
