Diff comments:
> diff --git a/testcases/image/1717_Install_RST
> b/testcases/image/1717_Install_RST
> new file mode 100644
> index 0000000..03920e8
> --- /dev/null
> +++ b/testcases/image/1717_Install_RST
> @@ -0,0 +1,72 @@
> +The scope of this test is to ensure that on UEFI systems RST is detected
> +properly, that FAMILY can be installed once disabled, and that the resulting
> +installation can boot in UEFI as well, regardless of network availability.
> +
> +<em>Proceed in your native language if you wish. Instructions will remain in
> English</em>
> +
> +<dl>
> + <dt>Boot up the image in UEFI mode</dt>
> + <dt>In GRUB boot menu, select UEFI Firmware settings</dt>
> + <dt>Check hardware settings for the hard-drive and if set to ACPI mode,
done
> + change it to "RAID" or "RST"</dt>
> + <dt>Save and exit the firmware</dt>
> + <dt>Boot up the image in UEFI mode</dt>
> + <dd>The system boots properly and loads the installer displaying the
> Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY'
> buttons</dd>
> + <dt>Click on the Install FAMILY icon</dt>
done
> + <dd>The 'Keyboard Layout' screen appears</dd>
> + <dd>The proposed keyboard corresponds with your keyboard</dd>
> + <dt>Select your keyboard layout and click on continue</dt>
> + <dd>The 'Turn off RST' screen is displayed and there is no way to
> + continue the installation</dd>
done
> + <dt>Flash the QR code with a phone</dt>
> + <dd>Verify that the page help.ubuntu.com/rst opens with detailed
> + information about RST and how to disable it.</dd>
done
> + <dt>Follow the instructions on the page OR disable RST from UEFI
> + firmware</dt>
done
> + <dt>Boot up the image in UEFI mode</dt>
> + <dd>The system boots properly and loads the installer displaying the
> Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY'
> buttons</dd>
> + <dt>Click on the Install FAMILY icon</dt>
> + <dd>The 'Keyboard Layout' screen appears</dd>
done
> + <dd>The proposed keyboard corresponds with your keyboard</dd>
> + <dt>Select your keyboard layout and click on continue</dt>
> + <dd>The 'Preparing to install FAMILY' screen is displayed</dd>
> + <dt>On the screen Preparing to install FAMILY, note the availability of
> the following components</dt>
done
> + <dd>Available options should represent the state of your system
> accurately</dd>
> + <dd>
> + <ul>
> + <li>Download updates while installing FAMILY should be
> blank</li>
> + <li>(If on a 'laptop') Is plugged to a power source</li>
> + <li>Install third-party software ... option available</li>
> + </ul>
> + </dd>
> + <dt>Click on the continue button</dt>
> + <dd>The 'Installation type' screen is displayed</dd>
> + <dt>Select any installation type and click on the continue button</dt>
> + <dd>Write changes dialogue appears</dd>
> + <dt>Click continue</dt>
> + <dd>If there is only one hard disk, the installer skips to the
> "Where are you?' screen. Otherwise, the 'Installation type' screen is
> displayed</dd>
> + <dt>If there is only one hard disk, skip to step 10 (On the 'Where are
> you?' screen...). Otherwise, on the 'Installation type' screen verify that
> the drive selected on the Select drive list corresponds to the drive on the
> chart (e.g /dev/sda)</dt>
> + <dd>Selected drive is displayed on the chart</dd>
> + <dt>Verify that the full drive space is allocated</dt>
> + <dd>Full drive space is allocated for installation</dd>
> + <dt>Click on the Install Now button</dt>
> + <dd>The 'Where are you?' screen is displayed, which should not
> necessarily match your timezone.</dd>
> + <dt>Select your timezone, and click on the continue button</dt>
> + <dd>The 'Who are you?' screen appears</dd>
> + <dt>Input your initial user details and password <em>admin can not be
> used - it is a dedicated Linux User</em></dt>
> + <dd>Name, username and password are accepted. Login options and home
> folder encryption choices shown</dd>
> + <dd>Continue button becomes available</dd>
> + <dt>Press continue</dt>
> + <dd>The 'Welcome to FAMILY ' slide is displayed</dd>
done
> + <dd>The slideshow is entirely in your language</dd>
> + <dt>Wait for the installer to finish</dt>
> + <dd>An 'Installation Complete' dialog appears</dd>
> + <dt>Click the Restart now button</dt>
> + <dd>GUI is shut down, a prompt to remove media and press Enter
> appears</dd>
> + <dt>Remove the disc and press enter</dt>
> + <dd>The machine is rebooted</dd>
> + <dt>Allow the machine to reboot</dt>
> + <dd>The system boots properly and loads into FAMILY showing username
> selected at step 14</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a
> href="results#add_result">submit</a> a 'passed' result.
> + If an action fails, or produces an unexpected result, please <a
> href="results#add_result">submit</a> a 'failed' result and <a
> href="../../buginstructions">file a bug</a>. Please be sure to include the
> bug number when you <a href="results#add_result">submit</a> your
> result.</strong>
--
https://code.launchpad.net/~ubuntu-testcase/ubuntu-manual-tests/+git/ubuntu-manual-tests/+merge/382743
Your team Ubuntu Testcase Admins is subscribed to branch
ubuntu-manual-tests:master.
--
Mailing list: https://launchpad.net/~kubuntu-council
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kubuntu-council
More help : https://help.launchpad.net/ListHelp
