Alexandre Ghiti has proposed merging ~alexghiti/ubuntu-manual-tests:int/alex/riscv_22.04.1 into ubuntu-manual-tests:main.
Requested reviews: Ubuntu Testcase Admins (ubuntu-testcase) For more details, see: https://code.launchpad.net/~alexghiti/ubuntu-manual-tests/+git/ubuntu-manual-tests/+merge/427190 -- Your team Ubuntu Testcase Admins is requested to review the proposed merge of ~alexghiti/ubuntu-manual-tests:int/alex/riscv_22.04.1 into ubuntu-manual-tests:main.
diff --git a/testcases/image/1754_Install VisionFive b/testcases/image/1754_Install VisionFive new file mode 100755 index 0000000..35dd5cc --- /dev/null +++ b/testcases/image/1754_Install VisionFive @@ -0,0 +1,65 @@ +The scope of this test is to ensure that riscv64+visionfive image boots from SD card on StarFive VisionFive board + +<dl> + <dt>Flash downloaded image onto SD card</dt> + <dd>You can use Gnome Disks app to restore img.xz onto the SD card</dd> + <dd> Alternatively you can use xz -d to decompress, and then dd to copy the image to the SD card</dd> + <dt>Connect networking, serial console to the board</dt> + <dd>Ethernet cable for networking</dd> + <dd>FTDI adapter for serial console (pinout available here: https://rvspace.org/en/Product/VisionFive/Technical_Documents/VisionFive_Single_Board_Computer_Quick_Start_Guide)</dd> + <dt>Connect to the serial console</dt> + <dd>sudo screen /dev/ttyUSB1 115200</dd> + <dt>Power on the board</dt> + <dd>You should see U-BOOT menu</dd> + <dd>It should then boot default entry after a delay</dd> + <dd>After a while cloud-init will run</dd> + <dd>Then one will be able to login</dd> + <dt>Login and change password</dt> + <dd>Login using ubuntu for both username and password</dd> + <dd>Reenter ubuntu password again</dd> + <dd>Set new password</dd> + <dd>Confirm the new password</dd> + <dt>Perform WiFi testing</dt> + <dd>Make sure the WiFi device is enabled:</dd> + <dd>$ sudo apt get install network-manager</dd> + <dd>$ nmcli radio wifi</dd> + <dd>enabled</dd> + <dd>List AP:</dd> + <dd>$ nmcli dev wifi list</dd> + <dt>Perform generic testing</dt> + <dd>Check that apt update works</dd> + <dd>Run any command that is not installed, check that command-not-found recommends things to install</dd> + <dd>e.g. hello</dd> + <dd>Install a package and check that it works, e.g. hello</dd> + <dt>Perform snap testing</dt> + <dd>Install a snap and check that it works, e.g. hello</dd> + <dt>Perform HDMI testing</dt> + <dd>Plug an HDMI cable and make sure a prompt asking for login appears on the screen</dd> + <dt>Perform USB test</dt> + <dd>Plug a keyboard in and enter the login/password</dd> + <dt>Perform Bluetooth testing</dt> + <dd>Add the RISC-V PPA:</dd> + <dd>$ sudo add-apt-repository ppa:ubuntu-risc-v-team/develop</dd> + <dd>$ sudo apt update </dd> + <dd>Install the required packages:</dd> + <dd>$ sudo apt install linux-firmware-starfive brcm-patchram-plus-starfive</dd> + <dd>The installation may fail because the Bluetooth is flaky but the service installed by the brcm-patchram-plus-starfive package takes care of retrying</dd> + <dd>Check the brcm-patchram-plus-starfive.service status:</dd> + <dd>$ sudo systemctl status brcm-patchram-plus-starfive.service </dd> + <dd> Loaded: loaded (/lib/systemd/system/brcm-patchram-plus-starfive.service; enabled; vendor preset: enabled) + Active: active (running) since Wed 2022-06-22 13:42:33 UTC; 32min ago </dd> + <dd> ... </dd> + <dd>Additionally, you can check that the Bluetooth controller appears:</dd> + <dd>$ bluetoothctl </dd> + <dd> Agent registered </dd> + <dd> [CHG] Controller 70:4A:0E:95:C7:1B Pairable: yes </dd> + <dd>Note that the bluetooth requires GPIO toggling so if that works, we consider GPIO to work too.</dd> + <dt>Reboot</dt> + <dd>The board should reboot normally</dt> + <dt>Poweroff</dt> + <dd>Console messages should reach poweroff target</dd> + <dd>There should be final kernel dmsg powering off</dd> + <dd>Manually turn power-off from the board</dd> +</dl> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result. + If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong> diff --git a/testcases/image/1755_Install Nezha b/testcases/image/1755_Install Nezha new file mode 100755 index 0000000..5c15c84 --- /dev/null +++ b/testcases/image/1755_Install Nezha @@ -0,0 +1,41 @@ +The scope of this test is to ensure that riscv64+nezha image boots from SD card on Nezha board + +<dl> + <dt>Flash downloaded image onto SD card</dt> + <dd>You can use Gnome Disks app to restore img.xz onto the SD card</dd> + <dd> Alternatively you can use xz -d to decompress, and then dd to copy the image to the SD card</dd> + <dt>Connect networking, serial console to the board</dt> + <dd>Ethernet cable for networking</dd> + <dd>FTDI adapter for serial console (pinout available here: https://linuxgizmos.com/files/rvboards_nezha_detail.jpg)</dd> + <dt>Connect to the serial console</dt> + <dd>sudo screen /dev/ttyUSB1 115200</dd> + <dt>Power on the board</dt> + <dd>You should see U-BOOT menu</dd> + <dd>It should then boot default entry after a delay</dd> + <dd>After a while cloud-init will run</dd> + <dd>Then one will be able to login</dd> + <dt>Login and change password</dt> + <dd>Login using ubuntu for both username and password</dd> + <dd>Reenter ubuntu password again</dd> + <dd>Set new password</dd> + <dd>Confirm the new password</dd> + <dt>Perform generic testing</dt> + <dd>Check that apt update works</dd> + <dd>Run any command that is not installed, check that command-not-found recommends things to install</dd> + <dd>e.g. hello</dd> + <dd>Install a package and check that it works, e.g. hello</dd> + <dt>Perform snap testing</dt> + <dd>Install a snap and check that it works, e.g. hello</dd> + <dt>Perform HDMI testing</dt> + <dd>Plug an HDMI cable and make sure a prompt asking for login appears on the screen</dd> + <dt>Perform USB test</dt> + <dd>Plug a keyboard in and enter the login/password</dd> + <dt>Reboot</dt> + <dd>The board should reboot normally</dt> + <dt>Poweroff</dt> + <dd>Console messages should reach poweroff target</dd> + <dd>There should be final kernel dmsg powering off</dd> + <dd>Manually turn power-off from the board</dd> +</dl> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result. + If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
-- Mailing list: https://launchpad.net/~kubuntu-council Post to : [email protected] Unsubscribe : https://launchpad.net/~kubuntu-council More help : https://help.launchpad.net/ListHelp
