On 7/15/07, Luca <[EMAIL PROTECTED]> wrote: > On 7/13/07, Dave Hansen <[EMAIL PROTECTED]> wrote: > > diff -ru kvm-fast-dmesg.txt kvm-slow-dmesg.txt > > > > Linux version 2.6.22 ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu > > 4.1.2-0ubuntu4)) #13 Wed Jul 11 15:27:01 PDT 2007 > > Is this a vanilla 2.6.22? 32 bit? > > > @@ -107,20 +90,21 @@ > > PIIX3: IDE controller at PCI slot 0000:00:01.1 > > PIIX3: chipset revision 0 > > PIIX3: not 100% native mode: will probe irqs later > > -PIIX3: neither IDE port enabled (BIOS) > > + ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio > > + ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio > > Hum, FC6 PIIX driver always comes up with the same mode, regardless of > what I'm doing to the controller...
Ok, now I'm confused... pci_config_write: PIIX3 IDE: addr=40 val=00008000 len=2 pci_config_write: PIIX3 IDE: addr=42 val=00008000 len=2 I'm using KVM-27 userspace, and the BIOS is enabling both ports. So... linux shouldn't think that the ports are disabled (yet I saw the same thing with FC7 and libata). Luca ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel
