On 9/20/07, Avi Kivity <[EMAIL PROTECTED]> wrote:
> Not much user visible change besides the OpenBSD regression fix.
>
> As usual, if you have an issue please try with -no-kvm-irqchip and report.
32 bit Fedora7 on a 32 bit host (kvm-intel) dies due to screaming
interrupts during IDE probe. Same problem with KVM-41 (last known
working is KVM-36, I haven't tested anything in between). In both
cases -no-kvm-irqchip fixes the problem.
Log attached.
Luca
Linux version 2.6.22.2-42.fc6 ([EMAIL PROTECTED]) (gcc version 4.1.2 20070626
(Red Hat 4.1.2-13)) #1 SMP Wed Aug 15 11:32:12 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 98288
HighMem 98288 -> 98288
early_node_map[1] active PFN ranges
0: 0 -> 98288
DMI not present or invalid.
Using APIC driver default
ACPI: RSDP 000FAAC0, 0014 (r0 QEMU )
ACPI: RSDT 17FF0000, 002C (r1 QEMU QEMURSDT 1 QEMU 1)
ACPI: FACP 17FF002C, 0074 (r1 QEMU QEMUFACP 1 QEMU 1)
ACPI: DSDT 17FF0100, 0909 (r1 BXPC BXDSDT 1 INTL 20061109)
ACPI: FACS 17FF00C0, 0040
ACPI: APIC 17FF0A10, 0040 (r1 QEMU QEMUAPIC 1 QEMU 1)
ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
ACPI: acpi=force override
ACPI: PM-Timer IO Port: 0xb008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:2 APIC version 20
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 18000000:e7fc0000)
Built 1 zonelists. Total pages: 97521
Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=force console=tty0
console=ttyS0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07bd000 soft=c079d000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2133.485 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 382348k/393152k available (2219k kernel code, 10324k reserved, 1177k
data, 260k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc55000 - 0xfffff000 (3752 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
lowmem : 0xc0000000 - 0xd7ff0000 ( 383 MB)
.init : 0xc0757000 - 0xc0798000 ( 260 kB)
.data : 0xc062adc6 - 0xc0751584 (1177 kB)
.text : 0xc0400000 - 0xc062adc6 (2219 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 4361.58 BogoMIPS (lpj=2180791)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 8K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Intel QEMU Virtual CPU version 0.9.0 stepping 03
Total of 1 processors activated (4361.58 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
APIC calibration not consistent with PM Timer: 121ms instead of 100ms
APIC delta adjusted to PM-Timer: 6249968 (7618049)
Brought up 1 CPUs
Time: 20:35:48 Date: 08/20/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa530, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region b000-b03f claimed by PIIX4 ACPI
PCI quirk: region b100-b10f claimed by PIIX4 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2275k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1190320548.591:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
ksign: Installing public key data
Loading keyring
- Added public key 1ADEE2DC68AD2ABA
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16450
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
hda: QEMU HARDDISK, ATA DISK drive
irq 14: nobody cared (try booting with the "irqpoll" option)
[<c0451902>] __report_bad_irq+0x36/0x75
[<c0451aef>] note_interrupt+0x1ae/0x1eb
[<c045104a>] handle_IRQ_event+0x1a/0x3f
[<c0452361>] handle_edge_irq+0xd4/0xfc
[<c045228d>] handle_edge_irq+0x0/0xfc
[<c0407803>] do_IRQ+0xac/0xd1
[<c0405f23>] common_interrupt+0x23/0x30
[<c0627a85>] _spin_unlock_irqrestore+0x8/0x9
[<c0451708>] setup_irq+0x145/0x17b
[<c05658ec>] ide_intr+0x0/0x1be
[<c04517ba>] request_irq+0x7c/0x98
[<c0568b2a>] init_irq+0x20b/0x430
[<c0568e77>] hwif_init+0x128/0x2f2
[<c0569197>] probe_hwif_init_with_fixup+0x13/0x7e
[<c056b519>] ide_setup_pci_device+0x6f/0x9e
[<c07733b6>] ide_scan_pcidev+0x25/0x48
[<c07733f9>] ide_scan_pcibus+0x20/0xa7
[<c07728a8>] ide_init+0x52/0x62
[<c0757616>] kernel_init+0x1ed/0x34f
[<c0404e76>] ret_from_fork+0x6/0x20
[<c0757429>] kernel_init+0x0/0x34f
[<c0757429>] kernel_init+0x0/0x34f
[<c0406177>] kernel_thread_helper+0x7/0x10
=======================
handlers:
[<c05658ec>] (ide_intr+0x0/0x1be)
Disabling IRQ #14
Clocksource tsc unstable (delta = 4686671091 ns)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14<6>Time: acpi_pm clocksource has been
installed.
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
irq 15: nobody cared (try booting with the "irqpoll" option)
[<c0451902>] __report_bad_irq+0x36/0x75
[<c0451aef>] note_interrupt+0x1ae/0x1eb
[<c045104a>] handle_IRQ_event+0x1a/0x3f
[<c0452361>] handle_edge_irq+0xd4/0xfc
[<c045228d>] handle_edge_irq+0x0/0xfc
[<c0407803>] do_IRQ+0xac/0xd1
[<c0405f23>] common_interrupt+0x23/0x30
[<c0627a85>] _spin_unlock_irqrestore+0x8/0x9
[<c0451708>] setup_irq+0x145/0x17b
[<c05658ec>] ide_intr+0x0/0x1be
[<c04517ba>] request_irq+0x7c/0x98
[<c0568b2a>] init_irq+0x20b/0x430
[<c0568e77>] hwif_init+0x128/0x2f2
[<c0569197>] probe_hwif_init_with_fixup+0x13/0x7e
[<c056b527>] ide_setup_pci_device+0x7d/0x9e
[<c07733b6>] ide_scan_pcidev+0x25/0x48
[<c07733f9>] ide_scan_pcibus+0x20/0xa7
[<c07728a8>] ide_init+0x52/0x62
[<c0757616>] kernel_init+0x1ed/0x34f
[<c0404e76>] ret_from_fork+0x6/0x20
[<c0757429>] kernel_init+0x0/0x34f
[<c0757429>] kernel_init+0x0/0x34f
[<c0406177>] kernel_thread_helper+0x7/0x10
=======================
handlers:
[<c05658ec>] (ide_intr+0x0/0x1be)
Disabling IRQ #15
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 20971520 sectors (10737 MB) w/256KiB Cache, CHS=16383/255/63, (U)DMA
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel
