Hello,
I have a problem with my virtual machines. I am using kvm53
on an AMD Athlon(tm) 64 X2 Dual Core Processor 5000+.
As distribution I use Ubuntu server 7.10.
As kernel I use Linux 2.6.22-14-server #1 SMP Sun Oct 14 22:09:15 GMT
2007 x86_64 GNU/Linux.
I have 3 different vms running. At the beginning they all work without a
problem.
Then, after one moment to another one or more stop working.
I did a ping test to all the machines, the vm with the failure stops
pinging.
The result from external ping: Destination host unreachable.
The same result from a ping onto the main server.
Here are my configuration files:
cat /etc/qemu-ifup
#!/bin/sh
/sbin/ifconfig $1 0.0.0.0 promisc up
/usr/sbin/brctl addif br0 $1
sleep 2
------------------------------------------------------------------------
cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto br0
iface br0 inet static
address 195.24.77.169
netmask 255.255.255.0
gateway 195.24.77.1
bridge_ports eth0
bridge_stp off
bridge_maxwait 5
------------------------------------------------------------------------
I use scripts for starting the vms:
kvm -hda apache.img -hdb apache_storage.img -m 512 -boot c -net
nic,vlan=0,macaddr=00:16:3e:00:00:01 -net tap -nographic -daemonize
kvm -hda postfix.img -m 512 -boot c -net
nic,vlan=0,macaddr=00:16:3e:00:00:12 -net tap -nographic -daemonize
kvm -hda openvpn.img -m 256 -boot c -net
nic,vlan=0,macaddr=00:16:3e:00:00:03 -net tap -nographic -daemonize
------------------------------------------------------------------------
The tapN devices are being created at the startup of the vms.
When I run dmesg I have this:
[ 112.390943] br0: port 2(tap1) entering learning state
[ 112.391919] br0: port 3(tap0) entering learning state
[ 112.397605] br0: port 4(tap2) entering learning state
[ 122.674313] tap0: no IPv6 routers present
[ 122.729185] tap1: no IPv6 routers present
[ 122.843901] tap2: no IPv6 routers present
[ 123.336081] kvm: emulating exchange as write
[ 127.367940] br0: topology change detected, propagating
[ 127.367949] br0: port 4(tap2) entering forwarding state
[ 127.362971] br0: topology change detected, propagating
[ 127.362977] br0: port 2(tap1) entering forwarding state
[ 127.362978] br0: topology change detected, propagating
[ 127.362980] br0: port 3(tap0) entering forwarding state
No indication of a problem, nowhere in the log files.
I don't know if the vms are freezing, or the network forwarding stops
working.
I also activated "net.ipv4.conf.default.forwarding=1"
I googled days for that problem, but without a result.
I hope that maybe you have a solution for this problem. That would be
great, because I prefer using kvm instead of other virtualization systems.
Thank you very much in advance,
Greetings from Luxembourg.
Have a nice day,
Mike
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel
