Izik Eidus wrote: > On Mon, 2007-12-10 at 08:44 -0500, Jerry Geis wrote: > >> I installed redhat7.3 and redhat 9 an a qemu-img with 12G each. >> >> When I am running the ne2k-pci the network stalls. >> I tried both redhat 7.3 and redhat 9. both stall. >> >> I then tried to change to use "-net nic,model=rtl8139" >> and I could not get the network to even start up on redhat 9. >> > try -net nic,model=rtl8139 -net user > >> I re-ran kudzu to detect the new network card - it did, I rebooted >> I got errors trying to bring up eth0. >> >> I am running centos 5.1, AMD 6400+ X2, kvm-55, kernel 2.6.23.9 >> >> What might my issue be? >> >> Jerry >> >> >> ------------------------------------------------------------------------- >> SF.Net email is sponsored by: >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> kvm-devel mailing list >> kvm-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/kvm-devel >> > > > The extra -net user did the trick for redhat 9. THanks, I'll try redhat 7 now.
The network "seemed" slow. ethtool eth0 reports 100m full. when copying all my files over it was slow. THese were source files (text) not big files at all. Jerry ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel