Joerg Roedel wrote: > On Mon, Apr 28, 2008 at 07:35:10PM +0200, Jan Kiszka wrote: >> Hi, >> >> sorry, the test environment is not really reproducible (stock kvm-66, >> yet unpublished NMI support by Sheng Yang and me, special guest), but >> I'm just fishing for some ideas on what may cause the flood of the >> following warning in my kernel log: >> >> ------------[ cut here ]------------ >> WARNING: at /data/kvm-66/kernel/x86.c:180 >> kvm_queue_exception_e+0x30/0x54 [kvm]() >> Modules linked in: ipt_MASQUERADE kvm_intel kvm bridge tun ip6t_LOG >> nf_conntrack_ipv6 xt_pkttype ipt_LOG xt_limit snd_pcm_oss snd_mixer_oss >> snd_seq snd_seq_device nls_utf8 cifs af_packet ip6t_REJECT xt_tcpudp >> ipt_REJECT xt_state iptable_mangle iptable_nat nf_nat iptable_filter >> ip6table_mangle nf_conntrack_ipv4 nf_conntrack ip_tables ip6table_filter >> ip6_tables cpufreq_conservative x_tables cpufreq_userspace >> cpufreq_powersave acpi_cpufreq ipv6 microcode fuse ohci_hcd loop rfcomm >> l2cap wlan_scan_sta ath_rate_sample ath_pci snd_hda_intel wlan pcmcia >> firmware_class hci_usb snd_pcm snd_timer ath_hal(P) sdhci battery >> bluetooth button ohci1394 mmc_core rtc_cmos parport_pc intel_agp >> rtc_core dock ac snd_page_alloc iTCO_wdt ieee1394 sky2 rtc_lib >> yenta_socket parport snd_hwdep snd iTCO_vendor_support i2c_i801 >> rsrc_nonstatic pcmcia_core sg i2c_core soundcore serio_raw joydev >> sha256_generic aes_x86_64 aes_generic cbc dm_crypt crypto_blkcipher >> usbhid hid ff_memless sd_mod ehci_hcd uhci_hcd usbcore dm_snapshot >> dm_mod edd ext3 mbcache jbd fan ata_piix ahci libata scsi_mod thermal >> processor >> Pid: 4718, comm: qemu-system-x86 Tainted: P N >> 2.6.25-rc5-git2-109.8-default #1 >> >> Call Trace: >> [<ffffffff8020d826>] dump_trace+0xc4/0x576 >> [<ffffffff8020dd18>] show_trace+0x40/0x57 >> [<ffffffff8044e341>] _etext+0x72/0x7b >> [<ffffffff80238137>] warn_on_slowpath+0x58/0x80 >> [<ffffffff886e2e05>] :kvm:kvm_queue_exception_e+0x30/0x54 >> [<ffffffff886e3678>] :kvm:kvm_task_switch+0xca/0x20a >> [<ffffffff8870d096>] :kvm_intel:handle_task_switch+0x19/0x1b >> [<ffffffff8870cb1b>] :kvm_intel:kvm_handle_exit+0x7f/0x9c >> [<ffffffff886e51e2>] :kvm:kvm_arch_vcpu_ioctl_run+0x49b/0x686 >> [<ffffffff886e08c9>] :kvm:kvm_vcpu_ioctl+0xf7/0x3ca >> [<ffffffff802ad0ba>] vfs_ioctl+0x2a/0x78 >> [<ffffffff802ad34f>] do_vfs_ioctl+0x247/0x261 >> [<ffffffff802ad3be>] sys_ioctl+0x55/0x77 >> [<ffffffff8020c18a>] system_call_after_swapgs+0x8a/0x8f >> [<00007faed2969267>] >> >> ---[ end trace 5d286714f3c5c50f ]--- > > Hmm, seems we have to check for DF and triple faults in the > kvm_queue_exception functions too. Does the attached patch fix the > problem (patch is against kvm-66).
Thanks, it indeed fixes the warnings (*) and makes KVM issue a reset. But then is stumbles and falls probably over some inconsistent system state: exception 13 (43) rax 0000000000000000 rbx 0000000000000000 rcx 0000000000000000 rdx 0000000000000633 rsi 0000000000000000 rdi 0000000000000000 rsp 0000000000000000 rbp 0000000000000000 r8 0000000000000000 r9 0000000000000000 r10 0000000000000000 r11 0000000000000000 r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 0000000000000000 rip 000000000000fff0 rflags 00033002 cs f000 (000f0000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) ds 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) es 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) ss 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) fs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) gs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) tr 0178 (fffbd000/00002088 p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl 0) ldt 0000 (00000000/0000ffff p 1 dpl 0 db 0 s 0 type 2 l 0 g 0 avl 0) gdt 0/ffff idt 0/ffff cr0 60000010 cr2 0 cr3 0 cr4 0 cr8 0 efer 0 code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 --> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Looks like trying to execute the first instruction after reset is already unsuccessful. As the tr selector is non-zero here, I already tried a kvm_arch_reset_cpu-hack along the line that sets KVM_REQ_TRIPLE_FAULT, but without success. Any idea what to check? Note that this does not happen when I raise a reset via the monitor. BTW, kvm_show_code() does not seem to provide correct informations, even when I add it right before the first kvm_run(). Jan (*) There is just a bit noise left behind in the syslog: kvm_handle_exit: unexpected, valid vectoring info and exit reason is 0x9 kvm: inject_page_fault: double fault kvm_handle_exit: unexpected, valid vectoring info and exit reason is 0x9 handle_exception: unexpected, vectoring info 0x80000b08 intr info 0x80000b0d -- Siemens AG, Corporate Technology, CT SE 2 Corporate Competence Center Embedded Linux ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel
