Hi,
Got a kernel oops with a stack trace deep somewhere in kvm ...
This is a stock Fedora-8 kernel with kvm-69 external modules.
Happens when trying to boot the Fedora-9 xen kernel using xenner.
cheers,
Gerd
Initializing cgroup subsys cpuset
Linux version 2.6.24.7-92.fc8 ([EMAIL PROTECTED]) (gcc version 4.1.2 20070925
(Red Hat 4.1.2-33)) #1 SMP Wed May 7 16:26:02 EDT 2008
Command line: ro root=/dev/zweiblum/root
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 521936) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F67D0, 0024 (r2 LENOVO)
ACPI: XSDT 7F6D1496, 008C (r1 LENOVO TP-7I 1040 LTP 0)
ACPI: FACP 7F6D1600, 00F4 (r3 LENOVO TP-7I 1040 LNVO 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or
length: 000000000000102C/0 [20070126]
ACPI: DSDT 7F6D195E, D2F3 (r1 LENOVO TP-7I 1040 MSFT 100000E)
ACPI: FACS 7F6F4000, 0040
ACPI: SSDT 7F6D17B4, 01AA (r1 LENOVO TP-7I 1040 MSFT 100000E)
ACPI: ECDT 7F6DEC51, 0052 (r1 LENOVO TP-7I 1040 LNVO 1)
ACPI: TCPA 7F6DECA3, 0032 (r2 LENOVO TP-7I 1040 LNVO 1)
ACPI: APIC 7F6DECD5, 0068 (r1 LENOVO TP-7I 1040 LNVO 1)
ACPI: MCFG 7F6DED3D, 003C (r1 LENOVO TP-7I 1040 LNVO 1)
ACPI: HPET 7F6DED79, 0038 (r1 LENOVO TP-7I 1040 LNVO 1)
ACPI: SLIC 7F6DEE62, 0176 (r1 LENOVO TP-7I 1040 LTP 0)
ACPI: BOOT 7F6DEFD8, 0028 (r1 LENOVO TP-7I 1040 LTP 1)
ACPI: SSDT 7F6F2697, 025F (r1 LENOVO TP-7I 1040 INTL 20050513)
ACPI: SSDT 7F6F28F6, 00A6 (r1 LENOVO TP-7I 1040 INTL 20050513)
ACPI: SSDT 7F6F299C, 04F7 (r1 LENOVO TP-7I 1040 INTL 20050513)
ACPI: SSDT 7F6F2E93, 01D8 (r1 LENOVO TP-7I 1040 INTL 20050513)
No NUMA configuration found
Faking a node at 0000000000000000-000000007f6d0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 521936) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007f6d0000
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 521936
On node 0 totalpages: 521839
DMA zone: 56 pages used for memmap
DMA zone: 1333 pages reserved
DMA zone: 2610 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510761 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 42376 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 513371
Policy zone: DMA32
Kernel command line: ro root=/dev/zweiblum/root
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1995.002 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049088k/2087744k available (2499k kernel code, 38268k reserved, 1398k
data, 332k init)
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3993.43 BogoMIPS (lpj=1996717)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 10390641
Detected 10.390 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.82 BogoMIPS (lpj=1994912)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=224 bytes
sizeof(task_struct)=2224 bytes
CPU0 attaching sched-domain:
domain 0: span 00000000,00000003
groups: 00000000,00000001 00000000,00000002
domain 1: span 00000000,00000003
groups: 00000000,00000003
CPU1 attaching sched-domain:
domain 0: span 00000000,00000003
groups: 00000000,00000002 00000000,00000001
domain 1: span 00000000,00000003
groups: 00000000,00000003
net_namespace: 120 bytes
Time: 11:05:21 Date: 06/06/08
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR:No DMAR devices found
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: ee000000-ee0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 3000-4fff
MEM window: ec000000-edffffff
PREFETCH window: e4000000-e40fffff
PCI: Bridge: 0000:00:1c.2
IO window: 5000-6fff
MEM window: e8000000-e9ffffff
PREFETCH window: e4100000-e41fffff
PCI: Bridge: 0000:00:1c.3
IO window: 7000-8fff
MEM window: ea000000-ebffffff
PREFETCH window: e4200000-e42fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
IO window: 00009000-000090ff
IO window: 00009400-000094ff
PREFETCH window: e0000000-e3ffffff
MEM window: 88000000-8bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 9000-cfff
MEM window: e4300000-e7ffffff
PREFETCH window: e0000000-e3ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3916k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1212750321.570:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 21043F6E16A59B22
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 7F6F1D36, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513)
ACPI: SSDT 7F6F203D, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F6F1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
ACPI: SSDT 7F6F1FB8, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (71 C)
ACPI: Thermal Zone [THM1] (72 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
registered taskstats version 1
Magic number: 12:128:74
Freeing unused kernel memory: 332k freed
Write protecting the kernel read-only data: 1084k
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Clocksource tsc unstable (delta = -327533279 ns)
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match,
using nr_ports
ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft USB Wireless Mouse as /class/input/input3
input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on
usb-0000:00:1d.0-1
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xee444500 irq 2299
ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xee444580 irq 2299
ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xee444600 irq 2299
ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xee444680 irq 2299
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST910021AS, 4.06, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access ATA ST910021AS 4.06 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED]
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 164097
ext3_orphan_cleanup: deleting unreferenced inode 163859
ext3_orphan_cleanup: deleting unreferenced inode 163858
ext3_orphan_cleanup: deleting unreferenced inode 163857
ext3_orphan_cleanup: deleting unreferenced inode 163847
ext3_orphan_cleanup: deleting unreferenced inode 163846
EXT3-fs: dm-0: 6 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1212750330.919:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
NET: Registered protocol family 23
nsc-ircc 00:0a: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
input: Video Bus as /class/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
input: PC Speaker as /class/input/input7
input: Power Button (FF) as /class/input/input8
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input9
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input10
ACPI: Sleep Button (CM) [SLPB]
iTCO_vendor_support: vendor-support=0
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: AC Adapter [AC] (on-line)
ata5.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux,
1.2.26kds
iwl3945: Copyright(c) 2003-2008 Intel Corporation
thinkpad_acpi: ThinkPad ACPI Extras v0.17
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7IET23WW (1.04 ), EC 79HT50WW-1.07
thinkpad_acpi: Lenovo ThinkPad T60
thinkpad_acpi: radio switch found; radios are enabled
ata5.00: configured for UDMA/33
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 RB01 PQ: 0 ANSI: 5
scsi 4:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
e1000 0000:02:00.0: Disabling L1 ASPM
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
thinkpad_acpi: standard ACPI backlight interface available, not loading native
one...
input: ThinkPad Extra Buttons as /class/input/input11
e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:16:41:e1:3d:40
ACPI: Battery Slot [BAT0] (battery present)
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:2010
PCI: Setting latency timer of device 0000:00:1b.0 to 64
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
ACPI: PCI interrupt for device 0000:03:00.0 disabled
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/zweiblum-swap. Priority:-1 extents:1
across:2097144k
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bridge firewalling registered
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
br0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
virbr0: starting userspace STP failed, starting kernel STP
loaded kvm module (kvm-68)
virbr0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 00000000,00000003
groups: 00000000,00000001 00000000,00000002
domain 1: span 00000000,00000003
groups: 00000000,00000003
CPU1 attaching sched-domain:
domain 0: span 00000000,00000003
groups: 00000000,00000002 00000000,00000001
domain 1: span 00000000,00000003
groups: 00000000,00000003
wlan0: Initial auth_alg=1
wlan0: authenticate with AP 00:1a:2a:39:4b:72
wlan0: RX authentication from 00:1a:2a:39:4b:72 (alg=1 transaction=2 status=0)
wlan0: replying to auth challenge
wlan0: RX authentication from 00:1a:2a:39:4b:72 (alg=1 transaction=4 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1a:2a:39:4b:72
wlan0: RX AssocResp from 00:1a:2a:39:4b:72 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1a:2a:39:4b:72)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
Not cloning cgroup for unused subsystem ns
openvpn0: no IPv6 routers present
vpn0: Disabled Privacy Extensions
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
Not cloning cgroup for unused subsystem ns
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
loaded kvm module (kvm-69)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection enabled (BSSID=00:1a:2a:39:4b:72)
wlan0: CTS protection disabled (BSSID=00:1a:2a:39:4b:72)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 00000000,00000003
groups: 00000000,00000001 00000000,00000002
domain 1: span 00000000,00000003
groups: 00000000,00000003
domain 2: span 00000000,00000003
groups: 00000000,00000003
CPU1 attaching sched-domain:
domain 0: span 00000000,00000003
groups: 00000000,00000002 00000000,00000001
domain 1: span 00000000,00000003
groups: 00000000,00000003
domain 2: span 00000000,00000003
groups: 00000000,00000003
Monitor-Mwait will be used to enter C-3 state
xenner[25686]: segfault at 100 rip 35b4008343 rsp 7fff64c33830 error 4
Unable to handle kernel NULL pointer dereference at 0000000000000041 RIP:
[<ffffffff884e9feb>] :kvm:mmu_set_spte+0x22d/0x36f
PGD 57c28067 PUD 121e5067 PMD 0
Oops: 0002 [1] SMP
CPU 0
Modules linked in: kvm_intel(U) kvm(U) i915 drm nls_utf8 ipt_LOG xt_TCPMSS
xt_mark xt_MARK iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nfsd lockd
nfs_acl auth_rpcgss exportfs autofs4 tun sunrpc bridge nf_conntrack_ipv4
ipt_REJECT iptable_filter ip_tables nf_conntrack_netbios_ns nf_conntrack_ipv6
xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter
ip6_tables x_tables ipv6 ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core
ib_addr iscsi_tcp libiscsi scsi_transport_iscsi cpufreq_ondemand acpi_cpufreq
loop dm_multipath sr_mod cdrom arc4 ecb blkcipher ata_generic battery
thinkpad_acpi snd_hda_intel snd_seq_dummy iwl3945 iTCO_wdt mac80211 snd_seq_oss
ac snd_seq_midi_event snd_seq snd_seq_device joydev snd_pcm_oss snd_mixer_oss
e1000 snd_pcm iTCO_vendor_support button pcspkr hwmon snd_timer snd_page_alloc
i2c_i801 ata_piix i2c_core video output snd_hwdep nsc_ircc irda crc_ccitt snd
soundcore pata_acpi cfg80211 sg dm_snapshot dm_zero dm_mirror dm_mod ahci
libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
Pid: 25742, comm: xenner Not tainted 2.6.24.7-92.fc8 #1
RIP: 0010:[<ffffffff884e9feb>] [<ffffffff884e9feb>]
:kvm:mmu_set_spte+0x22d/0x36f
RSP: 0018:ffff8100470a5b38 EFLAGS: 00010256
RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffff81007b144040
RDX: 0000000000008000 RSI: 000000000000236b RDI: ffff8100699a0b58
RBP: ffffe20000000000 R08: 0000000000000000 R09: 0000000000000009
R10: 0000000000000001 R11: ffff810065bd8e18 R12: ffff8100699a0b58
R13: ffff81001dc40000 R14: 00000000471d7045 R15: 0000000000000001
FS: 0000000040a00950(0000) GS:ffffffff813cf000(0000) knlGS:0000000000000000
CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 0000000000000041 CR3: 0000000068ef8000 CR4: 00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process xenner (pid: 25742, threadinfo ffff8100470a4000, task ffff81006cd2f160)
Stack: 0000000400000002 0000000000000001 0000000000000007 ffff81001dc40000
0000000000000007 0000000000000009 ffff8100699a0b58 ffffffff884ebdc3
0000000000000040 ffff8100470a5c54 0000000000000000 000000000000236b
Call Trace:
[<ffffffff884ebdc3>] :kvm:paging64_page_fault+0x37f/0x3d2
[<ffffffff8854ad1e>] :kvm_intel:vcpu_put_rsp_rip+0x15/0x27
[<ffffffff884f1df8>] :kvm:kvm_get_apic_interrupt+0x4c/0x6b
[<ffffffff884ea7c9>] :kvm:kvm_mmu_page_fault+0x19/0x81
[<ffffffff884e7ea0>] :kvm:kvm_arch_vcpu_ioctl_run+0x450/0x606
[<ffffffff884e35ed>] :kvm:vcpu_put+0x16/0x1f
[<ffffffff884e38a2>] :kvm:kvm_vcpu_ioctl+0xf3/0x3a9
[<ffffffff811f0c1a>] sock_aio_write+0xf8/0x110
[<ffffffff810a2508>] do_sync_write+0xc9/0x10c
[<ffffffff8104af95>] autoremove_wake_function+0x0/0x2e
[<ffffffff8102e970>] __dequeue_entity+0x1c/0x32
[<ffffffff810ade2d>] do_ioctl+0x21/0x6b
[<ffffffff810ae0ba>] vfs_ioctl+0x243/0x25c
[<ffffffff810a2d6b>] vfs_write+0x13a/0x16f
[<ffffffff810ae124>] sys_ioctl+0x51/0x71
[<ffffffff8100be8e>] system_call+0x7e/0x83
Code: 0f ab 58 40 45 85 ff 0f 85 e8 00 00 00 49 8b 04 24 48 3b 05
RIP [<ffffffff884e9feb>] :kvm:mmu_set_spte+0x22d/0x36f
RSP <ffff8100470a5b38>
CR2: 0000000000000041
---[ end trace b2f90aef948ca7d3 ]---
