Hi Weidong,
Thank you for your advice.
The other messages which I found are the following messages which
KVM outputs:
BUG: kvm_destroy_phys_mem: invalid parameters (slot=-1)
BUG: kvm_destroy_phys_mem: invalid parameters (slot=-1)
and, IRQ status is as follows:
/proc/interrupt of the host OS is as follows:
cat /proc/interrupts
CPU0 CPU1
0: 45 0 IO-APIC-edge timer
1: 1 1 IO-APIC-edge i8042
4: 1 1 IO-APIC-edge
9: 0 0 IO-APIC-fasteoi acpi
12: 2 2 IO-APIC-edge i8042
14: 8675 8589 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
17: 0 1 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb7
18: 2201 2200 IO-APIC-fasteoi uhci_hcd:usb1,
uhci_hcd:usb6, pata_marvell
19: 43 45 IO-APIC-fasteoi uhci_hcd:usb5, ohci1394
21: 1091 1060 IO-APIC-fasteoi uhci_hcd:usb2, ata_piix, eth1
23: 2 2 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb8
505: 7198 7310 PCI-MSI-edge [EMAIL PROTECTED]:0000:00:02.0
506: 50 53 PCI-MSI-edge kvm_assigned_msi_device
NMI: 0 0 Non-maskable interrupts
LOC: 87300 87267 Local timer interrupts
RES: 54424 49773 Rescheduling interrupts
CAL: 494 446 Function call interrupts
TLB: 651 625 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
and GuestOS is as follows:
$ cat /proc/interrupts
CPU0
0: 42779 IO-APIC-edge timer
1: 76 IO-APIC-edge i8042
2: 0 XT-PIC-XT cascade
4: 1 IO-APIC-edge
8: 3 IO-APIC-edge rtc
10: 68 IO-APIC-edge eth1
11: 45 IO-APIC-edge 0, eth0
12: 228 IO-APIC-edge i8042
14: 9982 IO-APIC-edge libata
15: 740 IO-APIC-edge libata
NMI: 0 Non-maskable interrupts
LOC: 42638 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
Note that eth1 is Intel NIC.
Any idea ?
Thanks,
Kazushi
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
