On Sat, Jun 14, 2014 at 04:16:53PM +0200, Christoffer Dall wrote:
> On Wed, Jun 11, 2014 at 04:01:30PM +0200, Andrew Jones wrote:
> > This is the initial drop of the arm test framework and a first test
> > that just checks that setup completed (a selftest). kvm isn't needed
> > to run this test unless testing with smp > 1.
> >
> > Try it out with
> > yum install gcc-arm-linux-gnu
> > export QEMU=[qemu with mach-virt and virtio-testdev]
> > ./configure --cross-prefix=arm-linux-gnu- --arch=arm
> > make
> > ./run_tests.sh
> >
> > Signed-off-by: Andrew Jones <[email protected]>
> > ---
> > v5:
> > - memregions: check freemem_start is in bounds and document
> > - selftest: rename testnam => testname and properly init it
> > - io.c: use writeb instead of writel in puts() and use ioremap
> > - arm/run script update for new qemu ('-device ?' now requires -machine)
> > - couple other minor changes to setup.c and io.c [Christoffer Dall]
> > v4:
> > - moved fdt to just after stacktop (it was in the middle of free memory)
> > - switched from using heap to memregions
> > - get nr_cpus and added smp=<num> test
> > - added barrier.h
> > - use new report()/report_summary()
> > - config/config-arm.mak cleanup
> > ---
> > arm/cstart.S | 35 ++++++++++++
> > arm/flat.lds | 18 ++++++
> > arm/run | 35 ++++++++++++
> > arm/selftest.c | 89 +++++++++++++++++++++++++++++
> > arm/unittests.cfg | 18 ++++++
> > config/config-arm.mak | 72 ++++++++++++++++++++++++
> > configure | 12 +++-
> > lib/argv.c | 6 ++
> > lib/arm/asm/barrier.h | 18 ++++++
> > lib/arm/asm/io.h | 24 ++++++++
> > lib/arm/asm/setup.h | 63 +++++++++++++++++++++
> > lib/arm/asm/spinlock.h | 16 ++++++
> > lib/arm/eabi_compat.c | 20 +++++++
> > lib/arm/io.c | 65 +++++++++++++++++++++
> > lib/arm/setup.c | 149
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> > 15 files changed, 638 insertions(+), 2 deletions(-)
> > create mode 100644 arm/cstart.S
> > create mode 100644 arm/flat.lds
> > create mode 100755 arm/run
> > create mode 100644 arm/selftest.c
> > create mode 100644 arm/unittests.cfg
> > create mode 100644 config/config-arm.mak
> > create mode 100644 lib/arm/asm/barrier.h
> > create mode 100644 lib/arm/asm/io.h
> > create mode 100644 lib/arm/asm/setup.h
> > create mode 100644 lib/arm/asm/spinlock.h
> > create mode 100644 lib/arm/eabi_compat.c
> > create mode 100644 lib/arm/io.c
> > create mode 100644 lib/arm/setup.c
> >
> > diff --git a/arm/cstart.S b/arm/cstart.S
> > new file mode 100644
> > index 0000000000000..e28251db2950d
> > --- /dev/null
> > +++ b/arm/cstart.S
> > @@ -0,0 +1,35 @@
> > +/*
> > + * Boot entry point and assembler functions for armv7 tests.
> > + *
> > + * Copyright (C) 2014, Red Hat Inc, Andrew Jones <[email protected]>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +
> > +.arm
> > +
> > +.section .init
> > +
> > +.globl start
> > +start:
> > + /*
> > + * bootloader params are in r0-r2
> > + * See the kernel doc Documentation/arm/Booting
> > + */
> > + ldr sp, =stacktop
> > + bl setup
> > +
> > + /* run the test */
> > + ldr r0, =__argc
> > + ldr r0, [r0]
> > + ldr r1, =__argv
> > + bl main
> > + bl exit
> > + b halt
> > +
> > +.text
> > +
> > +.globl halt
> > +halt:
> > +1: wfi
> > + b 1b
> > diff --git a/arm/flat.lds b/arm/flat.lds
> > new file mode 100644
> > index 0000000000000..3e5d72e24989b
> > --- /dev/null
> > +++ b/arm/flat.lds
> > @@ -0,0 +1,18 @@
> > +
> > +SECTIONS
> > +{
> > + .text : { *(.init) *(.text) *(.text.*) }
> > + . = ALIGN(4K);
> > + .data : { *(.data) }
> > + . = ALIGN(16);
> > + .rodata : { *(.rodata) }
> > + . = ALIGN(16);
> > + .bss : { *(.bss) }
> > + . = ALIGN(4K);
> > + edata = .;
> > + . += 8K;
> > + . = ALIGN(4K);
> > + stacktop = .;
> > +}
> > +
> > +ENTRY(start)
> > diff --git a/arm/run b/arm/run
> > new file mode 100755
> > index 0000000000000..627123b7bc9b6
> > --- /dev/null
> > +++ b/arm/run
> > @@ -0,0 +1,35 @@
> > +#!/bin/bash
> > +
> > +if [ ! -f config.mak ]; then
> > + echo run ./configure first. See ./configure -h
> > + exit 2
> > +fi
> > +source config.mak
> > +
> > +qemu="${QEMU:-qemu-system-arm}"
> > +qpath=$(which $qemu 2>/dev/null)
> > +testdev=virtio-testdev
> > +
> > +if [ -z "$qpath" ]; then
> > + echo $qemu not found.
> > + exit 2
> > +fi
> > +
> > +if ! $qemu -machine '?' 2>&1 | grep 'ARM Virtual Machine' > /dev/null; then
> > + echo "$qpath doesn't support mach-virt ('-machine virt'). Exiting."
> > + exit 2
> > +fi
> > +
> > +if ! $qemu -machine virt -device '?' 2>&1 | grep $testdev > /dev/null; then
> > + echo "$qpath doesn't support $testdev. Exiting."
> > + exit 2
> > +fi
> > +
> > +command="$qemu -machine virt,accel=kvm:tcg -device $testdev -cpu
> > $PROCESSOR"
> > +command+=" -display none -serial stdio -kernel"
> > +
> > +echo $command "$@"
> > +$command "$@"
> > +ret=$?
> > +echo Return value from qemu: $ret
> > +exit $ret
> > diff --git a/arm/selftest.c b/arm/selftest.c
> > new file mode 100644
> > index 0000000000000..bcaecfae17fcd
> > --- /dev/null
> > +++ b/arm/selftest.c
> > @@ -0,0 +1,89 @@
> > +/*
> > + * Test the framework itself. These tests confirm that setup works.
> > + *
> > + * Copyright (C) 2014, Red Hat Inc, Andrew Jones <[email protected]>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +#include "libcflat.h"
> > +#include "asm/setup.h"
> > +
> > +#define TESTGRP "selftest"
> > +
> > +static char testname[64];
> > +
> > +static void testname_set(const char *subtest)
> > +{
> > + strcpy(testname, TESTGRP);
> > + if (subtest) {
> > + strcat(testname, "::");
> > + strcat(testname, subtest);
> > + }
> > +}
> > +
> > +static void assert_args(int num_args, int needed_args)
> > +{
> > + if (num_args < needed_args) {
> > + printf("%s: not enough arguments\n", testname);
> > + abort();
> > + }
> > +}
> > +
> > +static char *split_var(char *s, long *val)
> > +{
> > + char *p;
> > +
> > + p = strchr(s, '=');
> > + if (!p)
> > + return NULL;
> > +
> > + *val = atol(p+1);
> > + *p = '\0';
> > +
> > + return s;
> > +}
> > +
> > +static void check_setup(int argc, char **argv)
> > +{
> > + int nr_tests = 0, i;
> > + char *var;
> > + long val;
> > +
> > + for (i = 0; i < argc; ++i) {
> > +
> > + var = split_var(argv[i], &val);
> > + if (!var)
> > + continue;
> > +
> > + if (strcmp(argv[i], "mem") == 0) {
> > +
> > + phys_addr_t memsize =
> > + memregions[nr_memregions-1].addr
> > + + memregions[nr_memregions-1].size
> > + - PHYS_OFFSET;
> > + phys_addr_t expected = ((phys_addr_t)val)*1024*1024;
> > +
> > + report("%s[%s]", memsize == expected, testname, "mem");
> > + ++nr_tests;
> > +
> > + } else if (strcmp(argv[i], "smp") == 0) {
> > +
> > + report("%s[%s]", nr_cpus == (int)val, testname, "smp");
> > + ++nr_tests;
> > + }
> > + }
> > +
> > + assert_args(nr_tests, 2);
> > +}
> > +
> > +int main(int argc, char **argv)
> > +{
> > + testname_set(NULL);
> > + assert_args(argc, 1);
> > + testname_set(argv[0]);
> > +
> > + if (strcmp(argv[0], "setup") == 0)
> > + check_setup(argc-1, &argv[1]);
> > +
> > + return report_summary();
> > +}
> > diff --git a/arm/unittests.cfg b/arm/unittests.cfg
> > new file mode 100644
> > index 0000000000000..da9dfd7b1f118
> > --- /dev/null
> > +++ b/arm/unittests.cfg
> > @@ -0,0 +1,18 @@
> > +# Define your new unittest following the convention:
> > +# [unittest_name]
> > +# file = foo.flat # Name of the flat file to be used
> > +# smp = 2 # Number of processors the VM will use during this test
> > +# extra_params = -append <params...> # Additional parameters used
> > +# arch = arm/arm64 # Only if test case is specific to one
> > +# groups = group1 group2 # Used to identify test cases with run_tests -g
> > ...
> > +
> > +#
> > +# Test that the configured number of processors (smp = <num>), and
> > +# that the configured amount of memory (-m <MB>) are correctly setup
> > +# by the framework.
> > +#
> > +[selftest::setup]
> > +file = selftest.flat
> > +smp = 1
> > +extra_params = -m 256 -append 'setup smp=1 mem=256'
> > +groups = selftest
> > diff --git a/config/config-arm.mak b/config/config-arm.mak
> > new file mode 100644
> > index 0000000000000..915b1cc318d79
> > --- /dev/null
> > +++ b/config/config-arm.mak
> > @@ -0,0 +1,72 @@
> > +#
> > +# arm makefile
> > +#
> > +# Authors: Andrew Jones <[email protected]>
> > +#
> > +
> > +tests-common = \
> > + $(TEST_DIR)/selftest.flat
> > +
> > +tests =
> > +
> > +all: test_cases
> > +
> > +##################################################################
> > +bits = 32
> > +ldarch = elf32-littlearm
> > +
> > +ifeq ($(LOADADDR),)
> > + LOADADDR = 0x40000000
> > +endif
> > +phys_base = $(LOADADDR)
> > +kernel_offset = 0x10000
> > +
> > +CFLAGS += -D__arm__
> > +CFLAGS += -marm
> > +CFLAGS += -mcpu=$(PROCESSOR)
> > +CFLAGS += -std=gnu99
> > +CFLAGS += -ffreestanding
> > +CFLAGS += -Wextra
> > +CFLAGS += -O2
> > +CFLAGS += -I lib -I lib/libfdt
> > +
> > +cflatobjs += \
> > + lib/devicetree.o \
> > + lib/virtio.o \
> > + lib/virtio-testdev.o \
> > + lib/arm/io.o \
> > + lib/arm/setup.o
> > +
> > +libeabi = lib/arm/libeabi.a
> > +eabiobjs = lib/arm/eabi_compat.o
> > +
> > +libgcc := $(shell $(CC) -m$(ARCH) --print-libgcc-file-name)
> > +start_addr := $(shell printf "%x\n" $$(( $(phys_base) + $(kernel_offset)
> > )))
> > +
> > +FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) $(libeabi)
> > +%.elf: LDFLAGS = $(CFLAGS) -nostdlib
> > +%.elf: %.o $(FLATLIBS) arm/flat.lds
> > + $(CC) $(LDFLAGS) -o $@ \
> > + -Wl,-T,arm/flat.lds,--build-id=none,-Ttext=$(start_addr) \
> > + $(filter %.o, $^) $(FLATLIBS)
> > +
> > +%.flat: %.elf
> > + $(OBJCOPY) -O binary $^ $@
> > +
> > +$(libeabi): $(eabiobjs)
> > + $(AR) rcs $@ $^
> > +
> > +arch_clean: libfdt_clean
> > + $(RM) $(TEST_DIR)/*.{o,flat,elf} $(libeabi) $(eabiobjs) \
> > + $(TEST_DIR)/.*.d lib/arm/.*.d
> > +
> > +##################################################################
> > +
> > +tests_and_config = $(TEST_DIR)/*.flat $(TEST_DIR)/unittests.cfg
> > +
> > +cstart.o = $(TEST_DIR)/cstart.o
> > +
> > +test_cases: $(tests-common) $(tests)
> > +
> > +$(TEST_DIR)/selftest.elf: $(cstart.o) $(TEST_DIR)/selftest.o
> > +
> > diff --git a/configure b/configure
> > index 8a81bf92e27b7..f92f585724bb1 100755
> > --- a/configure
> > +++ b/configure
> > @@ -6,8 +6,7 @@ cc=gcc
> > ld=ld
> > objcopy=objcopy
> > ar=ar
> > -arch=`uname -m | sed -e s/i.86/i386/`
> > -processor="$arch"
> > +arch=`uname -m | sed -e s/i.86/i386/ | sed -e 's/arm.*/arm/'`
> > cross_prefix=
> >
> > usage() {
> > @@ -17,6 +16,7 @@ usage() {
> > Options include:
> > --test-dir=DIR the main directory for tests ($arch)
> > --arch=ARCH architecture to compile for ($arch)
> > + --processor=PROCESSOR processor to compile for ($arch)
> > --cross-prefix=PREFIX cross compiler prefix
> > --cc=CC c compiler to use ($cc)
> > --ld=LD ld linker to use ($ld)
> > @@ -66,6 +66,12 @@ while [[ "$1" = -* ]]; do
> > ;;
> > esac
> > done
> > +[ -z "$processor" ] && processor="$arch"
> > +
> > +if [ "$processor" = "arm" ]; then
> > + processor="cortex-a15"
> > +fi
> > +
> > if [ -z "$testdir" -a \( "$arch" = "i386" -o "$arch" = "x86_64" \) ]; then
> > testdir=x86
> > elif [ -z "$testdir" ]; then
> > @@ -80,6 +86,7 @@ if [ -f $testdir/run ]; then
> > fi
> >
> > # check for dependent 32 bit libraries
> > +if [ "$arch" != "arm" ]; then
> > cat << EOF > lib_test.c
> > #include <stdc++.h>
> > #include <boost_thread-mt.h>
> > @@ -94,6 +101,7 @@ if [ $exit -eq 0 ]; then
> > api=true
> > fi
> > rm -f lib_test.c
> > +fi
> >
> > # link lib/asm for the architecture
> > rm -f lib/asm
> > diff --git a/lib/argv.c b/lib/argv.c
> > index 4ee54a6eeac3e..078a05faffebf 100644
> > --- a/lib/argv.c
> > +++ b/lib/argv.c
> > @@ -31,3 +31,9 @@ void __setup_args(void)
> > }
> > __argc = argv - __argv;
> > }
> > +
> > +void setup_args(char *args)
> > +{
> > + __args = args;
> > + __setup_args();
> > +}
> > diff --git a/lib/arm/asm/barrier.h b/lib/arm/asm/barrier.h
> > new file mode 100644
> > index 0000000000000..acaeab5123431
> > --- /dev/null
> > +++ b/lib/arm/asm/barrier.h
> > @@ -0,0 +1,18 @@
> > +#ifndef _ASMARM_BARRIER_H_
> > +#define _ASMARM_BARRIER_H_
> > +/*
> > + * Adapted form arch/arm/include/asm/barrier.h
> > + */
> > +
> > +#define isb(option) __asm__ __volatile__ ("isb " #option : : : "memory")
> > +#define dsb(option) __asm__ __volatile__ ("dsb " #option : : : "memory")
> > +#define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory")
> > +
> > +#define mb() dsb()
> > +#define rmb() dsb()
> > +#define wmb() dsb(st)
> > +#define smp_mb() dmb(ish)
> > +#define smp_rmb() smp_mb()
> > +#define smp_wmb() dmb(ishst)
> > +
> > +#endif /* _ASMARM_BARRIER_H_ */
> > diff --git a/lib/arm/asm/io.h b/lib/arm/asm/io.h
> > new file mode 100644
> > index 0000000000000..51ec6e9aa2e99
> > --- /dev/null
> > +++ b/lib/arm/asm/io.h
> > @@ -0,0 +1,24 @@
> > +#ifndef _ASMARM_IO_H_
> > +#define _ASMARM_IO_H_
> > +#include "libcflat.h"
> > +#include "asm/barrier.h"
> > +
> > +#define __bswap16 bswap16
> > +static inline u16 bswap16(u16 val)
> > +{
> > + u16 ret;
> > + asm volatile("rev16 %0, %1" : "=r" (ret) : "r" (val));
> > + return ret;
> > +}
> > +
> > +#define __bswap32 bswap32
> > +static inline u32 bswap32(u32 val)
> > +{
> > + u32 ret;
> > + asm volatile("rev %0, %1" : "=r" (ret) : "r" (val));
> > + return ret;
> > +}
> > +
> > +#include "asm-generic/io.h"
> > +
> > +#endif /* _ASMARM_IO_H_ */
> > diff --git a/lib/arm/asm/setup.h b/lib/arm/asm/setup.h
> > new file mode 100644
> > index 0000000000000..8aedf6e672541
> > --- /dev/null
> > +++ b/lib/arm/asm/setup.h
> > @@ -0,0 +1,63 @@
> > +#ifndef _ASMARM_SETUP_H_
> > +#define _ASMARM_SETUP_H_
> > +/*
> > + * Copyright (C) 2014, Red Hat Inc, Andrew Jones <[email protected]>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +#include "libcflat.h"
> > +
> > +#define NR_CPUS 8
> > +extern u32 cpus[NR_CPUS];
> > +extern int nr_cpus;
> > +
> > +typedef u64 phys_addr_t;
> > +
> > +/*
> > + * memregions implement a very simple allocator which allows physical
> > + * memory to be partitioned into regions until all memory is allocated.
> > + * Also, as long as not all memory has been allocated, one region (the
> > + * highest indexable region) is used to represent the start and size of
> > + * the remaining free memory. This means that there will always be a
> > + * minimum of two regions: one for the unit test code, initially loaded
> > + * at the base of physical memory (PHYS_OFFSET), and another for the
> > + * remaining free memory.
> > + *
> > + * Note: This is such a simple allocator that there is no way to free
> > + * a memregion. For more complicated memory management a single region
> > + * can be allocated, but then have its memory managed by a more
> > + * sophisticated allocator, e.g. a page allocator.
> > + */
> > +#define NR_MEMREGIONS 16
> > +struct memregion {
> > + phys_addr_t addr;
> > + phys_addr_t size;
> > + bool free;
> > +};
> > +
> > +extern struct memregion memregions[NR_MEMREGIONS];
> > +extern int nr_memregions;
> > +
> > +/*
> > + * memregion_new returns a new memregion of size @size, or NULL if
> > + * there isn't enough free memory to satisfy the request.
> > + */
> > +extern struct memregion *memregion_new(phys_addr_t size);
> > +
> > +/*
> > + * memregions_show outputs all memregions with the following format
> > + * <start_addr>-<end_addr> [<USED|FREE>]
> > + */
> > +extern void memregions_show(void);
> > +
> > +#define PHYS_OFFSET ({ memregions[0].addr; })
> > +#define PHYS_SHIFT 40
> > +#define PHYS_SIZE (1ULL << PHYS_SHIFT)
> > +#define PHYS_MASK (PHYS_SIZE - 1ULL)
> > +
> > +#define PAGE_SHIFT 12
> > +#define PAGE_SIZE (1UL << PAGE_SHIFT)
> > +#define PAGE_MASK (~(PAGE_SIZE - 1UL))
> > +#define PAGE_ALIGN(addr) (((addr) + (PAGE_SIZE-1UL)) & PAGE_MASK)
> > +
> > +#endif /* _ASMARM_SETUP_H_ */
> > diff --git a/lib/arm/asm/spinlock.h b/lib/arm/asm/spinlock.h
> > new file mode 100644
> > index 0000000000000..04f5a1a5538e2
> > --- /dev/null
> > +++ b/lib/arm/asm/spinlock.h
> > @@ -0,0 +1,16 @@
> > +#ifndef _ASMARM_SPINLOCK_H_
> > +#define _ASMARM_SPINLOCK_H_
> > +
> > +struct spinlock {
> > + int v;
> > +};
> > +
> > +//TODO
> > +static inline void spin_lock(struct spinlock *lock __unused)
> > +{
> > +}
> > +static inline void spin_unlock(struct spinlock *lock __unused)
> > +{
> > +}
> > +
> > +#endif /* _ASMARM_SPINLOCK_H_ */
> > diff --git a/lib/arm/eabi_compat.c b/lib/arm/eabi_compat.c
> > new file mode 100644
> > index 0000000000000..59d624dcd9277
> > --- /dev/null
> > +++ b/lib/arm/eabi_compat.c
> > @@ -0,0 +1,20 @@
> > +/*
> > + * Adapted from u-boot's arch/arm/lib/eabi_compat.c
> > + */
> > +#include "libcflat.h"
> > +
> > +int raise(int signum __unused)
> > +{
> > + printf("Divide by zero!\n");
> > + abort();
> > + return 0;
> > +}
> > +
> > +/* Dummy functions to avoid linker complaints */
> > +void __aeabi_unwind_cpp_pr0(void)
> > +{
> > +}
> > +
> > +void __aeabi_unwind_cpp_pr1(void)
> > +{
> > +}
> > diff --git a/lib/arm/io.c b/lib/arm/io.c
> > new file mode 100644
> > index 0000000000000..114d6517a959e
> > --- /dev/null
> > +++ b/lib/arm/io.c
> > @@ -0,0 +1,65 @@
> > +/*
> > + * Each architecture must implement puts() and exit() with the I/O
> > + * devices exposed from QEMU, e.g. pl011 and virtio-testdev. That's
> > + * what's done here, along with initialization functions for those
> > + * devices.
> > + *
> > + * Copyright (C) 2014, Red Hat Inc, Andrew Jones <[email protected]>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +#include "libcflat.h"
> > +#include "devicetree.h"
> > +#include "virtio-testdev.h"
> > +#include "asm/spinlock.h"
> > +#include "asm/io.h"
> > +
> > +extern void halt(int code);
> > +
> > +/*
> > + * Use this guess for the pl011 base in order to make an attempt at
> > + * having earlier printf support. We'll overwrite it with the real
> > + * base address that we read from the device tree later.
> > + */
> > +#define QEMU_MACH_VIRT_PL011_BASE 0x09000000UL
> > +
> > +static struct spinlock uart_lock;
> > +static volatile u8 *uart0_base = (u8 *)QEMU_MACH_VIRT_PL011_BASE;
> > +
> > +static void uart0_init(void)
> > +{
> > + const char *compatible = "arm,pl011";
> > + struct dt_pbus_reg base;
> > + int ret;
> > +
> > + ret = dt_pbus_get_base_compatible(compatible, &base);
> > + assert(ret == 0 || ret == -FDT_ERR_NOTFOUND);
> > +
> > + if (ret) {
> > + printf("%s: %s not found in the device tree, aborting...\n",
> > + __func__, compatible);
> > + abort();
> > + }
> > +
> > + uart0_base = ioremap(base.addr, base.size);
> > +}
> > +
> > +void io_init(void)
> > +{
> > + uart0_init();
> > + virtio_testdev_init();
> > +}
> > +
> > +void puts(const char *s)
> > +{
> > + spin_lock(&uart_lock);
> > + while (*s)
> > + writeb(*s++, uart0_base);
> > + spin_unlock(&uart_lock);
> > +}
> > +
> > +void exit(int code)
> > +{
> > + virtio_testdev_exit(code);
> > + halt(code);
> > +}
> > diff --git a/lib/arm/setup.c b/lib/arm/setup.c
> > new file mode 100644
> > index 0000000000000..dafjsdfl86a244aef56b8
> > --- /dev/null
> > +++ b/lib/arm/setup.c
> > @@ -0,0 +1,149 @@
> > +/*
> > + * Initialize machine setup information and I/O.
> > + *
> > + * After running setup() unit tests may query how many cpus they have
> > + * (nr_cpus), how much free memory it has, and at what physical
>
> nit: you seem to be changing between singular and plural here, it's
> confusing.
Fixed for v6.
>
> > + * address that free memory starts (memregions[1].{addr,size}),
> > + * printf() and exit() will both work, and (argc, argv) are ready
> > + * to be passed to main().
> > + *
> > + * Copyright (C) 2014, Red Hat Inc, Andrew Jones <[email protected]>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +#include "libcflat.h"
> > +#include "libfdt/libfdt.h"
> > +#include "devicetree.h"
> > +#include "asm/spinlock.h"
> > +#include "asm/setup.h"
> > +
> > +extern unsigned long stacktop;
> > +extern void io_init(void);
> > +extern void setup_args(const char *args);
> > +
> > +u32 cpus[NR_CPUS] = { [0 ... NR_CPUS-1] = (~0UL) };
> > +int nr_cpus;
> > +
> > +static struct spinlock memregion_lock;
> > +struct memregion memregions[NR_MEMREGIONS];
> > +int nr_memregions;
> > +
> > +static void cpu_set(int fdtnode __unused, u32 regval, void *info __unused)
> > +{
> > + assert(nr_cpus < NR_CPUS);
> > + cpus[nr_cpus++] = regval;
> > +}
> > +
> > +static void cpu_init(void)
> > +{
> > + nr_cpus = 0;
> > + assert(dt_for_each_cpu_node(cpu_set, NULL) == 0);
> > +}
> > +
> > +static void memregions_init(phys_addr_t freemem_start)
> > +{
> > + /* we only expect one membank to be defined in the DT */
> > + struct dt_pbus_reg regs[1];
> > + phys_addr_t addr, size, mem_end;
> > +
> > + nr_memregions = dt_get_memory_params(regs, 1);
> > +
> > + assert(nr_memregions > 0);
> > +
> > + addr = regs[0].addr;
> > + size = regs[0].size;
> > + mem_end = addr + size;
> > +
> > + assert(!(addr & ~PHYS_MASK) && !((mem_end-1) & ~PHYS_MASK));
> > +
> > + memregions[0].addr = PAGE_ALIGN(addr); /* PHYS_OFFSET */
> > +
> > + freemem_start = PAGE_ALIGN(freemem_start);
> > + assert(freemem_start >= PHYS_OFFSET && freemem_start < mem_end);
> > +
> > + memregions[0].size = freemem_start - PHYS_OFFSET;
> > + memregions[1].addr = freemem_start;
> > + memregions[1].size = mem_end - freemem_start;
> > + memregions[1].free = true;
> > + nr_memregions = 2;
> > +
> > +#ifdef __arm__
> > + /*
> > + * make sure 32-bit unit tests don't have any surprises when
> > + * running without virtual memory, by ensuring the initial
> > + * memory region uses 32-bit addresses. Other memory regions
> > + * may have > 32-bit addresses though, and the unit tests are
> > + * free to do as they wish with that.
> > + */
> > + assert(!(memregions[0].addr >> 32));
> > + assert(!((memregions[0].addr + memregions[0].size - 1) >> 32));
> > +#endif
> > +}
> > +
> > +struct memregion *memregion_new(phys_addr_t size)
> > +{
> > + phys_addr_t freemem_start, mem_end;
> > + struct memregion *mr;
> > +
> > + spin_lock(&memregion_lock);
> > +
> > + mr = &memregions[nr_memregions-1];
> > +
> > + if (!mr->free || mr->size < size) {
> > + printf("%s: requested=0x%llx, free=0x%llx.\n", size,
> > + mr->free ? mr->size : 0ULL);
> > + return NULL;
> > + }
> > +
> > + mem_end = mr->addr + mr->size;
> > +
> > + mr->size = size;
> > + mr->free = false;
> > +
> > + freemem_start = PAGE_ALIGN(mr->addr + size);
> > +
> > + if (freemem_start < mem_end && nr_memregions < NR_MEMREGIONS) {
> > + mr->size = freemem_start - mr->addr;
> > + memregions[nr_memregions].addr = freemem_start;
> > + memregions[nr_memregions].size = mem_end - freemem_start;
> > + memregions[nr_memregions].free = true;
> > + ++nr_memregions;
> > + }
> > +
> > + spin_unlock(&memregion_lock);
> > +
> > + return mr;
> > +}
> > +
> > +void memregions_show(void)
> > +{
> > + int i;
> > + for (i = 0; i < nr_memregions; ++i)
> > + printf("%016llx-%016llx [%s]\n",
> > + memregions[i].addr,
> > + memregions[i].addr + memregions[i].size - 1,
> > + memregions[i].free ? "FREE" : "USED");
> > +}
> > +
> > +void setup(unsigned long arg __unused, unsigned long id __unused,
> > + const void *fdt)
> > +{
> > + const char *bootargs;
> > + u32 fdt_size;
> > +
> > + /*
> > + * Move the fdt to just above the stack. The free memory
> > + * then starts just after the fdt.
> > + */
> > + fdt_size = fdt_totalsize(fdt);
> > + assert(fdt_move(fdt, &stacktop, fdt_size) == 0);
> > + assert(dt_init(&stacktop) == 0);
> > +
> > + memregions_init((unsigned long)&stacktop + fdt_size);
> > +
> > + io_init();
> > + cpu_init();
> > +
> > + assert(dt_get_bootargs(&bootargs) == 0);
> > + setup_args(bootargs);
> > +}
> > --
> > 1.9.3
> >
>
> looks good otherwise:
>
> Reviewed-by: Christoffer Dall <[email protected]>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
