On Mon, Mar 23, 2015 at 12:56:36PM +1100, Gavin Shan wrote:
> On Mon, Mar 23, 2015 at 12:39:45PM +1100, David Gibson wrote:
> >On Sat, Mar 21, 2015 at 06:58:45AM +1100, Gavin Shan wrote:
> >> The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR)
> >> to inject the specified EEH error, which is represented by
> >> (struct vfio_eeh_pe_err), to the indicated PE for testing purpose.
> >>
> >> Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
> >
> >Reviewed-by: David Gibson <da...@gibson.dropbear.id.au>
> >
> >> ---
> >> Documentation/vfio.txt | 12 ++++++++++++
> >> drivers/vfio/vfio_spapr_eeh.c | 10 ++++++++++
> >> include/uapi/linux/vfio.h | 36 +++++++++++++++++++++++++++++++++++-
> >> 3 files changed, 57 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
> >> index 96978ec..c6e11a3 100644
> >> --- a/Documentation/vfio.txt
> >> +++ b/Documentation/vfio.txt
> >> @@ -385,6 +385,18 @@ The code flow from the example above should be
> >> slightly changed:
> >>
> >> ....
> >>
> >> + /* Inject EEH error, which is expected to be caused by 32-bits
> >> + * config load.
> >> + */
> >> + pe_op.op = VFIO_EEH_PE_INJECT_ERR;
> >> + pe_op.err.type = VFIO_EEH_ERR_TYPE_32;
> >> + pe_op.err.func = VFIO_EEH_ERR_FUNC_LD_CFG_ADDR;
> >> + pe_op.err.addr = 0ul;
> >> + pe_op.err.mask = 0ul;
> >> + ioctl(container, VFIO_EEH_PE_OP, &pe_op);
> >> +
> >> + ....
> >> +
> >> /* When 0xFF's returned from reading PCI config space or IO BARs
> >> * of the PCI device. Check the PE's state to see if that has been
> >> * frozen.
> >> diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
> >> index 5fa42db..38edeb4 100644
> >> --- a/drivers/vfio/vfio_spapr_eeh.c
> >> +++ b/drivers/vfio/vfio_spapr_eeh.c
> >> @@ -85,6 +85,16 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group
> >> *group,
> >> case VFIO_EEH_PE_CONFIGURE:
> >> ret = eeh_pe_configure(pe);
> >> break;
> >> + case VFIO_EEH_PE_INJECT_ERR:
> >> + minsz = offsetofend(struct vfio_eeh_pe_op, err.mask);
> >> + if (op.argsz < minsz)
> >> + return -EINVAL;
> >> + if (copy_from_user(&op, (void __user *)arg, minsz))
> >> + return -EFAULT;
> >> +
> >> + ret = eeh_pe_inject_err(pe, op.err.type, op.err.func,
> >> + op.err.addr, op.err.mask);
> >> + break;
> >> default:
> >> ret = -EINVAL;
> >> }
> >> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> >> index 82889c3..f68e962 100644
> >> --- a/include/uapi/linux/vfio.h
> >> +++ b/include/uapi/linux/vfio.h
> >> @@ -468,12 +468,23 @@ struct vfio_iommu_spapr_tce_info {
> >> * - unfreeze IO/DMA for frozen PE;
> >> * - read PE state;
> >> * - reset PE;
> >> - * - configure PE.
> >> + * - configure PE;
> >> + * - inject EEH error.
> >> */
> >> +struct vfio_eeh_pe_err {
> >> + __u32 type;
> >> + __u32 func;
> >> + __u64 addr;
> >> + __u64 mask;
> >> +};
> >> +
> >> struct vfio_eeh_pe_op {
> >> __u32 argsz;
> >> __u32 flags;
> >> __u32 op;
> >> + union {
> >> + struct vfio_eeh_pe_err err;
> >> + };
> >> };
> >>
> >> #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH
> >> functionality */
> >> @@ -490,6 +501,29 @@ struct vfio_eeh_pe_op {
> >> #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset
> >> */
> >> #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental
> >> reset */
> >> #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration
> >> */
> >> +#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error
> >> */
> >> +#define VFIO_EEH_ERR_TYPE_32 0 /* 32-bits EEH error
> >> type */
> >> +#define VFIO_EEH_ERR_TYPE_64 1 /* 64-bits EEH error
> >> type */
> >> +#define VFIO_EEH_ERR_FUNC_LD_MEM_ADDR 0 /* Memory load
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_LD_MEM_DATA 1
> >> +#define VFIO_EEH_ERR_FUNC_LD_IO_ADDR 2 /* IO load
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_LD_IO_DATA 3
> >> +#define VFIO_EEH_ERR_FUNC_LD_CFG_ADDR 4 /* Config load
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_LD_CFG_DATA 5
> >> +#define VFIO_EEH_ERR_FUNC_ST_MEM_ADDR 6 /* Memory store
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_ST_MEM_DATA 7
> >> +#define VFIO_EEH_ERR_FUNC_ST_IO_ADDR 8 /* IO store
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_ST_IO_DATA 9
> >> +#define VFIO_EEH_ERR_FUNC_ST_CFG_ADDR 10 /* Config store
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_ST_CFG_DATA 11
> >> +#define VFIO_EEH_ERR_FUNC_DMA_RD_ADDR 12 /* DMA read
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_DMA_RD_DATA 13
> >> +#define VFIO_EEH_ERR_FUNC_DMA_RD_MASTER 14
> >> +#define VFIO_EEH_ERR_FUNC_DMA_RD_TARGET 15
> >> +#define VFIO_EEH_ERR_FUNC_DMA_WR_ADDR 16 /* DMA write
> >> */
> >> +#define VFIO_EEH_ERR_FUNC_DMA_WR_DATA 17
> >> +#define VFIO_EEH_ERR_FUNC_DMA_WR_MASTER 18
> >> +#define VFIO_EEH_ERR_FUNC_DMA_WR_TARGET 19
> >
> >These all seem to duplicate (under slightly different names) the
> >defines you just added in arch/powerpc/include/asm/eeh.h. It would
> >make more sense to only have the uapi copy, surely.
> >
>
> David, Thanks for your time. The defines in eeh.h is used not only
> for mapping those constants defined in vfio.h, but also for validating
> arguments from debugfs entry "err_injct". So it'd better to keep
> them separate: one set is used by userspace, another set is used
> by host kernel.
I don't understand why this is an argument for duplicating them. They
have the same meanings and values, why can't you use the uapi versions
everywhere?
> By the way, Alex Williamson, could you please ACK this if you don't
> find obvious errors in the patch. I really want this to be merged
> to 4.1.
>
> Thanks,
> Gavin
>
>
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgp1e3sRfzHZa.pgp
Description: PGP signature
