Thanks. If you want a test-case you can apply/try the following on top of the previous kvm-unit-tests patch-set I sent ( http://www.spinics.net/lists/kvm/msg115525.html ).
Regards, Nadav -- >8 -- From: Nadav Amit <[email protected]> Subject: [PATCH kvm-unit-tests] x86: Test LINT0 is disabled after reset Requires x2APIC in order to easily save LINT0 during 16-bit code. For the test to pass a fix for qemu is required. Signed-off-by: Nadav Amit <[email protected]> --- x86/init.c | 13 ++++++++++++- x86/unittests.cfg | 1 + 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/x86/init.c b/x86/init.c index 2d7ea99..23079ad 100644 --- a/x86/init.c +++ b/x86/init.c @@ -70,6 +70,7 @@ static struct expected_state expected[] = { #define cr2 (*(volatile int*)0x2010) #define sysenter_eip (*(volatile int*)0x2014) #define boot_apic_id (*(volatile int *)0x2018) +#define lvt0 (*(volatile int *)0x201c) static void set_test_regs(void) { @@ -94,7 +95,10 @@ static bool check_test_regs(bool init) printf("wrong sysenter_eip msr: %x\n", sysenter_eip); error = true; } - + if (lvt0 != 0x10000) { + printf("wrong lvt0 value: %x\n", lvt0); + error = true; + } return error; } @@ -240,6 +244,13 @@ asm ( "cpuid\n" "shrl $24, %ebx\n" "mov %ebx, %cs:0x2018\n" // apic_id + "mov $0x1b, %ecx\n" // IA32_APIC_BASE + "rdmsr\n" + "or $0x400, %eax\n" + "wrmsr\n" // Enabling x2apic + "mov $0x835, %ecx\n" + "rdmsr\n" + "mov %eax, %cs:0x201c\n" // lvt0 "mov $0x0f, %al\n" // rtc_out(0x0f, 0x00); "out %al, $0x70\n" "mov $0x00, %al\n" diff --git a/x86/unittests.cfg b/x86/unittests.cfg index 2d25801..0d1a42b 100644 --- a/x86/unittests.cfg +++ b/x86/unittests.cfg @@ -86,6 +86,7 @@ arch = x86_64 [init] file = init.flat smp = 2 +extra_params = -cpu qemu64,+x2apic [msr] file = msr.flat -- 1.9.1 Paolo Bonzini <[email protected]> wrote: > > > On 13/04/2015 00:53, Nadav Amit wrote: >> Introducing KVM_CAP_DISABLE_QUIRKS for disabling x86 quirks that were >> previous >> created in order to overcome QEMU issues. Those issue were mostly result of >> invalid VM BIOS. Currently there are two quirks that can be disabled: >> >> 1. KVM_QUIRK_LINT0_REENABLED - LINT0 was enabled after boot >> 2. KVM_QUIRK_CD_NW_CLEARED - CD and NW are cleared after boot >> >> These two issues are already resolved in recent releases of QEMU, and would >> therefore be disabled by QEMU. >> >> Signed-off-by: Nadav Amit <[email protected]> >> --- >> Documentation/virtual/kvm/api.txt | 3 ++- >> arch/x86/include/asm/kvm_host.h | 2 ++ >> arch/x86/include/uapi/asm/kvm.h | 3 +++ >> arch/x86/kvm/lapic.c | 5 +++-- >> arch/x86/kvm/svm.c | 3 ++- >> arch/x86/kvm/x86.c | 29 +++++++++++++++++++++++++++++ >> include/uapi/linux/kvm.h | 1 + >> 7 files changed, 42 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/virtual/kvm/api.txt >> b/Documentation/virtual/kvm/api.txt >> index bc9f6fe..3931221 100644 >> --- a/Documentation/virtual/kvm/api.txt >> +++ b/Documentation/virtual/kvm/api.txt >> @@ -959,7 +959,8 @@ documentation when it pops into existence). >> 4.37 KVM_ENABLE_CAP >> >> Capability: KVM_CAP_ENABLE_CAP, KVM_CAP_ENABLE_CAP_VM >> -Architectures: ppc, s390 >> +Architectures: x86 (only KVM_CAP_ENABLE_CAP_VM), >> + mips (only KVM_CAP_ENABLE_CAP), ppc, s390 >> Type: vcpu ioctl, vm ioctl (with KVM_CAP_ENABLE_CAP_VM) >> Parameters: struct kvm_enable_cap (in) >> Returns: 0 on success; -1 on error >> diff --git a/arch/x86/include/asm/kvm_host.h >> b/arch/x86/include/asm/kvm_host.h >> index dea2e7e..f80ad59 100644 >> --- a/arch/x86/include/asm/kvm_host.h >> +++ b/arch/x86/include/asm/kvm_host.h >> @@ -635,6 +635,8 @@ struct kvm_arch { >> #endif >> >> bool boot_vcpu_runs_old_kvmclock; >> + >> + u64 disabled_quirks; >> }; >> >> struct kvm_vm_stat { >> diff --git a/arch/x86/include/uapi/asm/kvm.h >> b/arch/x86/include/uapi/asm/kvm.h >> index d7dcef5..2fec75e 100644 >> --- a/arch/x86/include/uapi/asm/kvm.h >> +++ b/arch/x86/include/uapi/asm/kvm.h >> @@ -345,4 +345,7 @@ struct kvm_xcrs { >> struct kvm_sync_regs { >> }; >> >> +#define KVM_QUIRK_LINT0_REENABLED (1 << 0) >> +#define KVM_QUIRK_CD_NW_CLEARED (1 << 1) >> + >> #endif /* _ASM_X86_KVM_H */ >> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c >> index 4a6e58a..fe2d89e 100644 >> --- a/arch/x86/kvm/lapic.c >> +++ b/arch/x86/kvm/lapic.c >> @@ -1577,8 +1577,9 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu) >> for (i = 0; i < APIC_LVT_NUM; i++) >> apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED); >> apic->lapic_timer.timer_mode = 0; >> - apic_set_reg(apic, APIC_LVT0, >> - SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT)); >> + if (!(vcpu->kvm->arch.disabled_quirks & KVM_QUIRK_LINT0_REENABLED)) >> + apic_set_reg(apic, APIC_LVT0, >> + SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT)); >> >> apic_set_reg(apic, APIC_DFR, 0xffffffffU); >> apic_set_spiv(apic, 0xff); >> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c >> index ce741b8..46299da 100644 >> --- a/arch/x86/kvm/svm.c >> +++ b/arch/x86/kvm/svm.c >> @@ -1575,7 +1575,8 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, >> unsigned long cr0) >> * does not do it - this results in some delay at >> * reboot >> */ >> - cr0 &= ~(X86_CR0_CD | X86_CR0_NW); >> + if (!(vcpu->kvm->arch.disabled_quirks & KVM_QUIRK_CD_NW_CLEARED)) >> + cr0 &= ~(X86_CR0_CD | X86_CR0_NW); >> svm->vmcb->save.cr0 = cr0; >> mark_dirty(svm->vmcb, VMCB_CR); >> update_cr0_intercept(svm); >> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c >> index b8cb1d0..c3859a6 100644 >> --- a/arch/x86/kvm/x86.c >> +++ b/arch/x86/kvm/x86.c >> @@ -2778,6 +2778,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long >> ext) >> case KVM_CAP_HYPERV_TIME: >> case KVM_CAP_IOAPIC_POLARITY_IGNORED: >> case KVM_CAP_TSC_DEADLINE_TIMER: >> + case KVM_CAP_ENABLE_CAP_VM: >> #ifdef CONFIG_KVM_DEVICE_ASSIGNMENT >> case KVM_CAP_ASSIGN_DEV_IRQ: >> case KVM_CAP_PCI_2_3: >> @@ -3825,6 +3826,26 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct >> kvm_irq_level *irq_event, >> return 0; >> } >> >> +static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, >> + struct kvm_enable_cap *cap) >> +{ >> + int r; >> + >> + if (cap->flags) >> + return -EINVAL; >> + >> + switch (cap->cap) { >> + case KVM_CAP_DISABLE_QUIRKS: >> + kvm->arch.disabled_quirks = cap->args[0]; >> + r = 0; >> + break; >> + default: >> + r = -EINVAL; >> + break; >> + } >> + return r; >> +} >> + >> long kvm_arch_vm_ioctl(struct file *filp, >> unsigned int ioctl, unsigned long arg) >> { >> @@ -4077,7 +4098,15 @@ long kvm_arch_vm_ioctl(struct file *filp, >> r = 0; >> break; >> } >> + case KVM_ENABLE_CAP: { >> + struct kvm_enable_cap cap; >> >> + r = -EFAULT; >> + if (copy_from_user(&cap, argp, sizeof(cap))) >> + goto out; >> + r = kvm_vm_ioctl_enable_cap(kvm, &cap); >> + break; >> + } >> default: >> r = kvm_vm_ioctl_assigned_device(kvm, ioctl, arg); >> } >> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h >> index f574d7b..01c0a8e 100644 >> --- a/include/uapi/linux/kvm.h >> +++ b/include/uapi/linux/kvm.h >> @@ -813,6 +813,7 @@ struct kvm_ppc_smmu_info { >> #define KVM_CAP_MIPS_MSA 112 >> #define KVM_CAP_S390_INJECT_IRQ 113 >> #define KVM_CAP_S390_IRQ_STATE 114 >> +#define KVM_CAP_DISABLE_QUIRKS 115 >> >> #ifdef KVM_CAP_IRQ_ROUTING > > Applied (locally) for 4.2. > > Paolo > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
