On Mon, Jul 06, 2015 at 10:17:33AM +0800, [email protected] wrote: > From: Shannon Zhao <[email protected]> > > We are about to trap and emulate acccesses to each PMU register > individually. This adds the context offsets for the AArch64 PMU > registers and their AArch32 counterparts. > > Signed-off-by: Shannon Zhao <[email protected]> > --- > arch/arm64/include/asm/kvm_asm.h | 59 > +++++++++++++++++++++++++++++++++++----- > 1 file changed, 52 insertions(+), 7 deletions(-) > > diff --git a/arch/arm64/include/asm/kvm_asm.h > b/arch/arm64/include/asm/kvm_asm.h > index 3c5fe68..21b5d3b 100644 > --- a/arch/arm64/include/asm/kvm_asm.h > +++ b/arch/arm64/include/asm/kvm_asm.h > @@ -56,14 +56,36 @@ > #define DBGWVR15_EL1 86 > #define MDCCINT_EL1 87 /* Monitor Debug Comms Channel Interrupt Enable > Reg */ > > +/* Performance Monitors Registers */ > +#define PMCR_EL0 88 /* Control Register */ > +#define PMOVSSET_EL0 89 /* Overflow Flag Status Set Register */ > +#define PMOVSCLR_EL0 90 /* Overflow Flag Status Clear Register */ > +#define PMCCNTR_EL0 91 /* Cycle Counter Register */ > +#define PMSELR_EL0 92 /* Event Counter Selection Register */ > +#define PMCEID0_EL0 93 /* Common Event Identification Register 0 */ > +#define PMCEID1_EL0 94 /* Common Event Identification Register 1 */ > +#define PMEVCNTR0_EL0 95 /* Event Counter Register (0-30) */
why do we need these when we trap-and-emulate and we have the kvm_pmc structs? Is that because the kvm_pmc structs are only used when we actually have an active counter running and registered with perf? > +#define PMEVTYPER0_EL0 96 /* Event Type Register (0-30) */ > +#define PMEVCNTR30_EL0 155 > +#define PMEVTYPER30_EL0 156 > +#define PMXEVCNTR_EL0 157 /* Selected Event Count Register */ > +#define PMXEVTYPER_EL0 158 /* Selected Event Type Register */ > +#define PMCNTENSET_EL0 159 /* Count Enable Set Register */ > +#define PMCNTENCLR_EL0 160 /* Count Enable Clear Register */ > +#define PMINTENSET_EL1 161 /* Interrupt Enable Set Register */ > +#define PMINTENCLR_EL1 162 /* Interrupt Enable Clear Register */ > +#define PMUSERENR_EL0 163 /* User Enable Register */ > +#define PMCCFILTR_EL0 164 /* Cycle Count Filter Register */ > +#define PMSWINC_EL0 165 /* Software Increment Register */ > + > /* 32bit specific registers. Keep them at the end of the range */ > -#define DACR32_EL2 88 /* Domain Access Control Register */ > -#define IFSR32_EL2 89 /* Instruction Fault Status Register */ > -#define FPEXC32_EL2 90 /* Floating-Point Exception Control > Register */ > -#define DBGVCR32_EL2 91 /* Debug Vector Catch Register */ > -#define TEECR32_EL1 92 /* ThumbEE Configuration Register */ > -#define TEEHBR32_EL1 93 /* ThumbEE Handler Base Register */ > -#define NR_SYS_REGS 94 > +#define DACR32_EL2 166 /* Domain Access Control Register */ > +#define IFSR32_EL2 167 /* Instruction Fault Status Register */ > +#define FPEXC32_EL2 168 /* Floating-Point Exception Control > Register */ > +#define DBGVCR32_EL2 169 /* Debug Vector Catch Register */ > +#define TEECR32_EL1 170 /* ThumbEE Configuration Register */ > +#define TEEHBR32_EL1 171 /* ThumbEE Handler Base Register */ > +#define NR_SYS_REGS 172 > > /* 32bit mapping */ > #define c0_MPIDR (MPIDR_EL1 * 2) /* MultiProcessor ID Register */ > @@ -85,6 +107,24 @@ > #define c6_IFAR (c6_DFAR + 1) /* Instruction Fault Address > Register */ > #define c7_PAR (PAR_EL1 * 2) /* Physical Address Register */ > #define c7_PAR_high (c7_PAR + 1) /* PAR top 32 bits */ > + > +/* Performance Monitors*/ > +#define c9_PMCR (PMCR_EL0 * 2) > +#define c9_PMOVSSET (PMOVSSET_EL0 * 2) > +#define c9_PMOVSCLR (PMOVSCLR_EL0 * 2) > +#define c9_PMCCNTR (PMCCNTR_EL0 * 2) > +#define c9_PMSELR (PMSELR_EL0 * 2) > +#define c9_PMCEID0 (PMCEID0_EL0 * 2) > +#define c9_PMCEID1 (PMCEID1_EL0 * 2) > +#define c9_PMXEVCNTR (PMXEVCNTR_EL0 * 2) > +#define c9_PMXEVTYPER (PMXEVTYPER_EL0 * 2) > +#define c9_PMCNTENSET (PMCNTENSET_EL0 * 2) > +#define c9_PMCNTENCLR (PMCNTENCLR_EL0 * 2) > +#define c9_PMINTENSET (PMINTENSET_EL1 * 2) > +#define c9_PMINTENCLR (PMINTENCLR_EL1 * 2) > +#define c9_PMUSERENR (PMUSERENR_EL0 * 2) > +#define c9_PMSWINC (PMSWINC_EL0 * 2) > + > #define c10_PRRR (MAIR_EL1 * 2) /* Primary Region Remap Register */ > #define c10_NMRR (c10_PRRR + 1) /* Normal Memory Remap Register */ > #define c12_VBAR (VBAR_EL1 * 2) /* Vector Base Address Register */ > @@ -96,6 +136,11 @@ > #define c10_AMAIR1 (c10_AMAIR0 + 1)/* Aux Memory Attr Indirection Reg */ > #define c14_CNTKCTL (CNTKCTL_EL1 * 2) /* Timer Control Register (PL1) */ > > +/* Performance Monitors*/ > +#define c14_PMEVCNTR0 (PMEVCNTR0_EL0 * 2) > +#define c14_PMEVTYPR0 (PMEVTYPER0_EL0 * 2) > +#define c14_PMCCFILTR (PMCCFILTR_EL0 * 2) > + > #define cp14_DBGDSCRext (MDSCR_EL1 * 2) > #define cp14_DBGBCR0 (DBGBCR0_EL1 * 2) > #define cp14_DBGBVR0 (DBGBVR0_EL1 * 2) > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
