Hi On Mon, Nov 30, 2015 at 3:17 AM, Kirill A. Shutemov <kir...@shutemov.name> wrote: > There are few defects in vga_get() related to signal hadning: > > - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE > case; > > - if we found pending signal we must remove ourself from wait queue > and change task state back to running; > > - -ERESTARTSYS is more appropriate, I guess. > > Signed-off-by: Kirill A. Shutemov <kir...@shutemov.name> > --- > > Alex, I try to get KVM with VGA passthrough working properly. I have i915 > (HD 4600) on the host and GTX 580 for the guest. The guest GPU is not > capabale of EFI, so I have to use x-vga=on. It's kinda work with your > patch for i915.enable_hd_vgaarb=1. But guest refuse to initialize the GPU > after KVM was not shut down correctly, resulting in host crash like this: > > BUG: unable to handle kernel paging request at ffff880870187ed8 > IP: [<ffff880870187ed8>] 0xffff880870187ed8 > PGD 2129067 PUD 80000008400001e3 > Oops: 0011 [#1] PREEMPT SMP > Modules linked in: iwlmvm iwlwifi > CPU: 6 PID: 3983 Comm: qemu-system-x86 Not tainted 4.3.0-gentoo #6 > Hardware name: Gigabyte Technology Co., Ltd. Z87X-UD7 TH/Z87X-UD7 TH-CF, BIOS > F5a 06/12/2014 > task: ffff88087a910000 ti: ffff8808632c0000 task.ti: ffff8808632c0000 > RIP: 0010:[<ffff880870187ed8>] [<ffff880870187ed8>] 0xffff880870187ed8 > RSP: 0018:ffff8808632c3d08 EFLAGS: 00010006 > RAX: ffff880870187db0 RBX: 0000000070187f58 RCX: 0000000000000000 > RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff880870187db0 > RBP: ffff8808632c3d48 R08: 0000000000000000 R09: 0000000000000000 > R10: 00000000000103c0 R11: 0000000000000293 R12: ffffffff81ea03c8 > R13: ffffffff8104c7cb R14: 0000000000000000 R15: 0000000000000003 > FS: 00007f984f9b2700(0000) GS:ffff88089f380000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: ffff880870187ed8 CR3: 00000008645f8000 CR4: 00000000001426e0 > Stack: > ffffffff810cc83d 00000000632c3d28 0000000000000000 ffffffff81ea03c0 > 0000000000000046 0000000000000003 0000000000000000 0000000000000000 > ffff8808632c3d80 ffffffff810cca44 ffff88087af63800 0000000000000286 > Call Trace: > [<ffffffff810cc83d>] ? __wake_up_common+0x4d/0x80 > [<ffffffff810cca44>] __wake_up+0x34/0x50 > [<ffffffff815d99e3>] __vga_put+0x73/0xd0 > [<ffffffff815d9db4>] vga_put+0x54/0x80 > [<ffffffff8169d042>] vfio_pci_vga_rw+0x1d2/0x220 > [<ffffffff8169a7f3>] vfio_pci_rw+0x33/0x60 > [<ffffffff8169abf7>] vfio_pci_write+0x17/0x20 > [<ffffffff816966a6>] vfio_device_fops_write+0x26/0x30 > [<ffffffff811a4b23>] __vfs_write+0x23/0xe0 > [<ffffffff811a4a53>] ? __vfs_read+0x23/0xd0 > [<ffffffff811b6e35>] ? do_vfs_ioctl+0x2b5/0x490 > [<ffffffff811a5194>] vfs_write+0xa4/0x190 > [<ffffffff811a5fa6>] SyS_pwrite64+0x66/0xa0 > [<ffffffff819a17d7>] entry_SYSCALL_64_fastpath+0x12/0x6a > Code: 88 ff ff e0 7e 18 70 08 88 ff ff 00 8c 57 76 08 88 ff ff 20 7f 18 70 08 > 88 ff ff 08 7f 18 70 08 88 ff ff 94 51 1a 81 ff ff ff ff <09> 00 00 00 00 00 > 00 00 01 8c 57 76 08 88 ff ff 00 8c 57 76 08 > RIP [<ffff880870187ed8>] 0xffff880870187ed8 > RSP <ffff8808632c3d08> > CR2: ffff880870187ed8 > > The patch fixes the crash, but doesn't help with getting GPU in guest > working again. > > Any ideas? > > --- > drivers/gpu/vga/vgaarb.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c > index 3166e4bc4eb6..9abcaa53bd25 100644 > --- a/drivers/gpu/vga/vgaarb.c > +++ b/drivers/gpu/vga/vgaarb.c > @@ -395,8 +395,10 @@ int vga_get(struct pci_dev *pdev, unsigned int rsrc, int > interruptible) > set_current_state(interruptible ? > TASK_INTERRUPTIBLE : > TASK_UNINTERRUPTIBLE); > - if (signal_pending(current)) { > - rc = -EINTR; > + if (interruptible && signal_pending(current)) { > + __set_current_state(TASK_RUNNING); > + remove_wait_queue(&vga_wait_queue, &wait); > + rc = -ERESTARTSYS; > break;
All 3 points are valid, and the patch looks good to me: Reviewed-by: David Herrmann <dh.herrm...@gmail.com> However, there seems to be a race between vga_lock and putting the thread asleep. We should fix that as well. See the hunk below (completely untested.. why is VGA still in use? *sigh*). Thanks David diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index a0b4334..82cf1e3 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -359,8 +359,8 @@ static void __vga_put int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible) { struct vga_device *vgadev, *conflict; + DECLARE_WAITQUEUE(wait, current); unsigned long flags; - wait_queue_t wait; int rc = 0; vga_check_first_use(); @@ -371,6 +371,11 @@ int vga_get return 0; for (;;) { + add_wait_queue(&vga_wait_queue, &wait); + set_current_state(interruptible ? + TASK_INTERRUPTIBLE : + TASK_UNINTERRUPTIBLE); + spin_lock_irqsave(&vga_lock, flags); vgadev = vgadev_find(pdev); if (vgadev == NULL) { @@ -383,25 +388,22 @@ int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible) if (conflict == NULL) break; - /* We have a conflict, we wait until somebody kicks the * work queue. Currently we have one work queue that we * kick each time some resources are released, but it would * be fairly easy to have a per device one so that we only * need to attach to the conflicting device */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&vga_wait_queue, &wait); - set_current_state(interruptible ? - TASK_INTERRUPTIBLE : - TASK_UNINTERRUPTIBLE); - if (signal_pending(current)) { - rc = -EINTR; + if (interruptible && signal_pending(current)) { + rc = -ERESTARTSYS; break; } schedule(); remove_wait_queue(&vga_wait_queue, &wait); } + + __set_current_state(TASK_RUNNING); + remove_wait_queue(&vga_wait_queue, &wait); return rc; } EXPORT_SYMBOL(vga_get); -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html