>From v2 to v3:
1)Remove unnessery check of is_dirty_pte() inside PageKsm()
We have added the is_dirty_pte() chceck to protect against the
reuse: case inside do_wp_page().
Andrea pointed to me that such condtion couldnt ever happen,
du to the fact that if VM_SHARED is set no Anonymous page can be
on the vma, therefore it is unpossible that such Page would become
KsmPage and therefore KsmPages would never trigger the reuse case
(Checkout From v1 to v2 for more info)
2)Add !vm_file check in addition to PageKsm() to check if sharedpage
Until now Ksm was checking whatever Pages are sharedpages (KsmPage)
by just running get_user_page() and then check if Page != AnonPage.
The problem raise as Ksm keep virtual addresses inside its data
strctures and if the user will free page and allocate new !AnonPage
Page, Ksm might think this page is shared page.
To solve this problem we have added an additional check for Ksm,
We are checking whatever the vma->vm_file is set to NULL, in case
we see a virtual address that its vma->vm_file is NULL and the
page that it pointing into it isnt AnonPage we can safetly know that
this is shared page (KsmPage).
3)Replace jhash() with jhash2()
Andrey Panin pointed that we should use jhash2 as it faster than
jhash().
Thanks.
(Below is info from previous posts)
>From v1 to v2:
1)Fixed security issue found by Chris Wright:
Ksm was checking if page is a shared page by running !PageAnon.
Beacuse that Ksm scan only anonymous memory, all !PageAnons
inside ksm data strctures are shared page, however there might
be a case for do_wp_page() when the VM_SHARED is used where
do_wp_page() would instead of copying the page into new anonymos
page, would reuse the page, it was fixed by adding check for the
dirty_bit of the virtual addresses pointing into the shared page.
I was not finding any VM code tha would clear the dirty bit from
this virtual address (due to the fact that we allocate the page
using page_alloc() - kernel allocated pages), ~but i still want
confirmation about this from the vm guys - thanks.~
2)Moved to sysfs to control ksm:
It was requested as a better way to control the ksm scanning
thread than ioctls.
the sysfs api:
dir: /sys/kernel/mm/ksm/
kernel_pages_allocated - information about how many kernel pages
ksm have allocated, this pages are not swappable, and each page
like that is used by ksm to share pages with identical content
pages_shared - how many pages were shared by ksm
run - set to 1 when you want ksm to run, 0 when no
max_kernel_pages - set the maximum amount of kernel pages
to be allocated by ksm, set 0 for unlimited.
pages_to_scan - how many pages to scan before ksm will sleep
sleep - how much usecs ksm will sleep.
3)Add sysfs paramater to control the maximum kernel pages to be by
ksm.
4)Add statistics about how much pages are really shared.
One issue still to be discussed:
There was a suggestion to use madvice(SHAREABLE) instead of using
ioctls to register memory that need to be scanned by ksm.
Such change is outside the area of ksm.c and would required adding
new madvice api, and change some parts of the vm and the kernel
code, so first thing to do, is realized if we really want this.
I dont know any other open issues.
Thanks.
This is from the first post:
(The kvm part, togather with the kvm-userspace part, was post with V1
before about a week, whoever want to test ksm may download the
patch from lkml archive)
KSM is a linux driver that allows dynamicly sharing identical memory
pages between one or more processes.
Unlike tradtional page sharing that is made at the allocation of the
memory, ksm do it dynamicly after the memory was created.
Memory is periodically scanned; identical pages are identified and
merged.
The sharing is unnoticeable by the process that use this memory.
(the shared pages are marked as readonly, and in case of write
do_wp_page() take care to create new copy of the page)
To find identical pages ksm use algorithm that is split into three
primery levels:
1) Ksm will start scan the memory and will calculate checksum for each
page that is registred to be scanned.
(In the first round of the scanning, ksm would only calculate
this checksum for all the pages)
2) Ksm will go again on the whole memory and will recalculate the
checmsum of the pages, pages that are found to have the same
checksum value, would be considered "pages that are most likely
wont changed"
Ksm will insert this pages into sorted by page content RB-tree that
is called "unstable tree", the reason that this tree is called
unstable is due to the fact that the page contents might changed
while they are still inside the tree, and therefore the tree would
become corrupted.
Due to this problem ksm take two more steps in addition to the
checksum calculation:
a) Ksm will throw and recreate the entire unstable tree each round
of memory scanning - so if we have corruption, it will be fixed
when we will rebuild the tree.
b) Ksm is using RB-tree, that its balancing is made by the node color
and not by the content, so even if the page get corrupted, it still
would take the same amount of time to search on it.
3) In addition to the unstable tree, ksm hold another tree that is called
"stable tree" - this tree is RB-tree that is sorted by the pages
content and all its pages are write protected, and therefore it cant get
corrupted.
Each time ksm will find two identcial pages using the unstable tree,
it will create new write-protected shared page, and this page will be
inserted into the stable tree, and would be saved there, the
stable tree, unlike the unstable tree, is never throwen away, so each
page that we find would be saved inside it.
Taking into account the three levels that described above, the algorithm
work like that:
search primary tree (sorted by entire page contents, pages write protected)
- if match found, merge
- if no match found...
- search secondary tree (sorted by entire page contents, pages not write
protected)
- if match found, merge
- remove from secondary tree and insert merged page into primary tree
- if no match found...
- checksum
- if checksum hasn't changed
- insert into secondary tree
- if it has, store updated checksum (note: first time this page
is handled it won't have a checksum, so checksum will appear
as "changed", so it takes two passes w/ no other matches to
get into secondary tree)
- do not insert into any tree, will see it again on next pass
The basic idea of this algorithm, is that even if the unstable tree doesnt
promise to us to find two identical pages in the first round, we would
probably find them in the second or the third or the tenth round,
then after we have found this two identical pages only once, we will insert
them into the stable tree, and then they would be protected there forever.
So the all idea of the unstable tree, is just to build the stable tree and
then we will find the identical pages using it.
The current implemantion can be improved alot:
we dont have to calculate exspensive checksum, we can just use the host
dirty bit.
currently we dont support shared pages swapping (other pages that are not
shared can be swapped (all the pages that we didnt find to be identical
to other pages...).
Walking on the tree, we keep call to get_user_pages(), we can optimized it
by saving the pfn, and using mmu notifiers to know when the virtual address
mapping was changed.
We currently scan just programs that were registred to be used by ksm, we
would later want to add the abilaty to tell ksm to scan PIDS (so you can
scan closed binary applications as well).
Right now ksm scanning is made by just one thread, multiple scanners
support might would be needed.
This driver is very useful for KVM as in cases of runing multiple guests
operation system of the same type.
(For desktop work loads we have achived more than x2 memory overcommit
(more like x3))
This driver have found users other than KVM, for example CERN,
Fons Rademakers:
"on many-core machines we run one large detector simulation program per core.
These simulation programs are identical but run each in their own process and
need about 2 - 2.5 GB RAM.
We typically buy machines with 2GB RAM per core and so have a problem to run
one of these programs per core.
Of the 2 - 2.5 GB about 700MB is identical data in the form of magnetic field
maps, detector geometry, etc.
Currently people have been trying to start one program, initialize the geometry
and field maps and then fork it N times, to have the data shared.
With KSM this would be done automatically by the system so it sounded extremely
attractive when Andrea presented it."
I am sending another seires of patchs for kvm kernel and kvm-userspace
that would allow users of kvm to test ksm with it.
The kvm patchs would apply to Avi git tree.
Izik Eidus (4):
MMU_NOTIFIERS: add set_pte_at_notify()
add page_wrprotect(): write protecting page.
add replace_page(): change the page pte is pointing to.
add ksm kernel shared memory driver.
include/linux/ksm.h | 48 ++
include/linux/miscdevice.h | 1 +
include/linux/mm.h | 5 +
include/linux/mmu_notifier.h | 34 +
include/linux/rmap.h | 11 +
mm/Kconfig | 6 +
mm/Makefile | 1 +
mm/ksm.c | 1674 ++++++++++++++++++++++++++++++++++++++++++
mm/memory.c | 90 +++-
mm/mmu_notifier.c | 20 +
mm/rmap.c | 139 ++++
11 files changed, 2027 insertions(+), 2 deletions(-)
create mode 100644 include/linux/ksm.h
create mode 100644 mm/ksm.c
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
