On 06/30/2009 02:11 PM, Yolkfull Chow wrote:
Signed-off-by: Yolkfull Chow<yz...@redhat.com>
---
client/tests/kvm/kvm.py | 1 +
client/tests/kvm/kvm_tests.cfg.sample | 56 ++++++++++++++++++++
client/tests/kvm/kvm_tests.py | 93 +++++++++++++++++++++++++++++++++
client/tests/kvm/kvm_vm.py | 2 +
4 files changed, 152 insertions(+), 0 deletions(-)
diff --git a/client/tests/kvm/kvm.py b/client/tests/kvm/kvm.py
index 4c7bae4..4fbce5b 100644
--- a/client/tests/kvm/kvm.py
+++ b/client/tests/kvm/kvm.py
@@ -55,6 +55,7 @@ class kvm(test.test):
"kvm_install": test_routine("kvm_install",
"run_kvm_install"),
"linux_s3": test_routine("kvm_tests", "run_linux_s3"),
"stress_boot": test_routine("kvm_tests", "run_stress_boot"),
+ "pci_hotplug": test_routine("kvm_tests", "run_pci_hotplug"),
Cool! It's very good since it tends to break.
}
# Make it possible to import modules from the test's bindir
diff --git a/client/tests/kvm/kvm_tests.cfg.sample
b/client/tests/kvm/kvm_tests.cfg.sample
index 2f864de..50b5765 100644
--- a/client/tests/kvm/kvm_tests.cfg.sample
+++ b/client/tests/kvm/kvm_tests.cfg.sample
@@ -94,6 +94,52 @@ variants:
max_vms = 5
alive_test_cmd = ps aux
+
+ - nic_hotplug:
+ type = pci_hotplug
+ pci_type = nic
+ modprobe_acpiphp = yes
+ reference_cmd = lspci
+ find_pci_cmd = 'lspci | tail -n1'
+ pci_test_cmd = 'nslookup www.redhat.com'
+ variants:
+ - @nic_8139:
+ pci_model = rtl8139
+ match_string = "8139"
+ - nic_virtio:
+ pci_model = virtio
+ match_string = "Virtio network device"
+ - nic_e1000:
+ pci_model = e1000
+ match_string = "Gigabit Ethernet Controller"
+
+ - block_hotplug:
+ type = pci_hotplug
+ pci_type = block
+ modprobe_acpiphp = yes
+ reference_cmd = lspci
+ find_pci_cmd = 'lspci | tail -n1'
+ images += " stg"
+ boot_drive_stg = no
+ image_name_stg = storage
+ image_size = 1G
+ force_create_image_stg = yes
+ pci_test_cmd = 'dir'
+ no Windows
+ variants:
+ - block_virtio:
+ pci_model = virtio
+ match_string = "Virtio block device"
+ - block_scsi:
+ pci_model = scsi
+ match_string = "SCSI storage controller"
+ variants:
There is no need to test qcow2/raw here since it shouldn't matter.
You can test qcow2 only, it is enough.
+ - fmt_qcow2:
+ image_format_stg = qcow2
+ - fmt_raw:
+ image_format_stg = raw
+
+
# NICs
variants:
- @rtl8139:
@@ -306,6 +352,12 @@ variants:
migration_test_command = ver&& vol
stress_boot:
alive_test_cmd = systeminfo
+ nic_hotplug:
+ modprobe_acpiphp = no
+ reference_cmd = systeminfo
+ find_pci_cmd = ipconfig /all | find "Description"
+ nic_e1000:
+ match_string = "Intel(R) PRO/1000 MT Network Connection"
variants:
- Win2000:
@@ -530,6 +582,10 @@ virtio|virtio_blk|e1000:
only Fedora.9 openSUSE-11 Ubuntu-8.10-server
+nic_hotplug.nic_virtio|block_hotplug:
+ no Windows
+
+
variants:
- @qcow2:
image_format = qcow2
diff --git a/client/tests/kvm/kvm_tests.py b/client/tests/kvm/kvm_tests.py
index 2d11fed..21280b9 100644
--- a/client/tests/kvm/kvm_tests.py
+++ b/client/tests/kvm/kvm_tests.py
@@ -585,3 +585,96 @@ def run_stress_boot(tests, params, env):
for se in sessions:
se.close()
logging.info("Total number booted: %d" % (num -1))
+
+
+def run_pci_hotplug(test, params, env):
+ """
+ Test pci devices' hotplug
+ 1) pci_add a deivce (nic or storage)
+ 2) Compare 'info pci' output
+ 3) Compare $reference_cmd output
+ 4) Verify whether pci_model is shown in $pci_find_cmd
+ 5) pci_del the device, verify whether could remove the pci device
+
+ @param test: kvm test object
+ @param params: Dictionary with the test parameters
+ @param env: Dictionary with test environment.
+ """
+ vm = kvm_utils.env_get_vm(env, params.get("main_vm"))
+ if not vm:
+ raise error.TestError("VM object not found in environment")
+ if not vm.is_alive():
+ raise error.TestError("VM seems to be dead; Test requires a living VM")
+
+ logging.info("Waiting for guest to be up...")
+
+ session = kvm_utils.wait_for(vm.ssh_login, 240, 0, 2)
+ if not session:
+ raise error.TestFail("Could not log into guest")
+
+ logging.info("Logged in")
+
+ # modprobe the module that enable hotplug
+ if params.get("modprobe_acpiphp") == "yes":
+ if session.get_command_status("modprobe acpiphp"):
+ raise error.TestError("Modprobe module 'acpiphp' failed")
+
+ # get reference output
+ s, info_pci_ref = vm.send_monitor_cmd("info pci")
+
+ # compare the output of `reference_cmd`
+ ref_cmd = params.get("reference_cmd")
+ reference = session.get_command_output(ref_cmd)
+
+ # implement pci hotplug
+ tested_model = params.get("pci_model")
+ logging.info("Testing hotplug pci device:%s" % tested_model)
+
+ test_type = params.get("pci_type")
+ if test_type == "nic":
+ pci_add_cmd = "pci_add pci_addr=auto nic model=%s" % tested_model
+ s, add_output = vm.send_monitor_cmd(pci_add_cmd)
You're basing the assumption that the VM was raised with -net tap or
-net user with the right vlan.
Actually it would be nice to hot add the host back end too (available on
newer kvm's). It's not a must.
+
+ elif test_type == "block":
+ image_name = params.get("image_name_stg")
+ image_format = params.get("image_format_stg", "qcow2")
+ image_filename = "%s.%s" % (image_name, image_format)
+ image_dir = os.path.join(test.bindir, "images")
+ storage_name = os.path.join(image_dir, image_filename)
+ pci_add_cmd = "pci_add pci_addr=auto storage file=%s,if=%s" % \
+ (storage_name, tested_model)
+ s, add_output = vm.send_monitor_cmd(pci_add_cmd)
+
+ if not "OK domain" in add_output:
+ raise error.TestFail("Command failed: %s" % pci_add_cmd)
+
+ # compare the output of 'info pci'
+ s, after_add = vm.send_monitor_cmd("info pci")
+ if after_add == info_pci_ref:
+ raise error.TestFail("No new pci device shown in 'info pci'")
+
+ time.sleep(5)
+
+ o = session.get_command_output(ref_cmd)
+ if reference == o:
+ raise error.TestFail("No new device shown in cmd: %s" % ref_cmd)
+
+ cmd = params.get("find_pci_cmd")
+ output = session.get_command_output(cmd)
+ if not params.get("match_string") in output:
+ raise error.TestFail("Not found pci model: %s; Command is: %s" % ( \
+ tested_model, cmd))
+
+ # del pci device
+ slot_id = "0" + add_output.split(",")[2].split()[1]
+ cmd = "pci_del pci_addr=%s" % slot_id
+ s, after_del = vm.send_monitor_cmd(cmd)
+ if after_del == after_add:
+ raise error.TestFail("Failed to hot remove pci device:%s; \
+ Command: %s" % (tested_model, cmd))
+
+ # check whether VM's network& disk work fine
+ if session.get_command_status(params.get("pci_test_cmd")):
+ raise error.TestFail("VM's %s damaged after pci_hotplug" % test_type)
Doesn't it need to fail after the hot delete?
+
+ session.close()
diff --git a/client/tests/kvm/kvm_vm.py b/client/tests/kvm/kvm_vm.py
index 503f636..95b55eb 100644
--- a/client/tests/kvm/kvm_vm.py
+++ b/client/tests/kvm/kvm_vm.py
@@ -239,6 +239,8 @@ class VM:
for image_name in kvm_utils.get_sub_dict_names(params, "images"):
image_params = kvm_utils.get_sub_dict(params, image_name)
+ if image_params.get("boot_drive") == "no":
+ continue
qemu_cmd += " -drive file=%s" % get_image_filename(image_params,
image_dir)
if image_params.get("drive_format"):
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
