On Thu, Jan 14, 2010 at 03:59:53PM +0200, Avi Kivity wrote:
> 
> >Also, just for further complication, the Ricoh chip does not support
> >MSI and shares an IRQ on the system board with the USB host controller.
> >I have rebound the USB host controller to pci-stub, but I'm not sure if
> >that totally takes care of the IRQ-sharing-without-MSI issue.
> 
> Can you post lspci -vv output for that card?  If it is pci 2.3
> compliant we might be able to handle the sharing.

It claims to be PCI 3.0 compliant.  But I don't see any mention MSI
anywhere in the specification:
http://www.aeneas.com.cn/PDF/Ricoh/2005/R5C832E1%5B1%5D.00.pdf

Attached is lspci -vv, thanks.

-- 
Ryan C. Underwood, <[email protected]>
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory 
Controller Hub (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 30
        Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 1800 [size=8]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated 
Graphics Controller (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #5 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 1860 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #2 (rev 03) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f4705c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at f4500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 
(rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f2000000-f3ffffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 
(rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f4200000-f42fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 
(rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 
(rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        Memory behind bridge: f4300000-f43fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at 1880 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #2 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 18a0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #3 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 18c0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #1 (rev 03) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f4706000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 
01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
        Memory behind bridge: f4400000-f44fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller 
(rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel modules: iTCO_wdt

00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE 
Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1830 [size=16]
        Kernel driver in use: ata_piix

00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA 
AHCI Controller (rev 03) (prog-if 01)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 28
        Region 0: I/O ports at 18f8 [size=8]
        Region 1: I/O ports at 18ec [size=4]
        Region 2: I/O ports at 18f0 [size=8]
        Region 3: I/O ports at 18e8 [size=4]
        Region 4: I/O ports at 1c00 [size=32]
        Region 5: Memory at f4705000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 1c20 [size=32]
        Kernel modules: i2c-i801

07:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN 
[Kedron] Network Connection (rev 61)
        Subsystem: Intel Corporation Device 1100
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlagn
        Kernel modules: iwlagn

08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 
(prog-if 10)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: [virtual] Memory at f4400000 (32-bit, non-prefetchable) 
[size=2K]
        Capabilities: <access denied>
        Kernel driver in use: pci-stub
        Kernel modules: firewire-ohci, ohci1394

08:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host 
Adapter (rev 22)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 18
        Region 0: [virtual] Memory at f4400800 (32-bit, non-prefetchable) 
[disabled] [size=256]
        Capabilities: <access denied>
        Kernel driver in use: pci-stub
        Kernel modules: sdhci-pci

08:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 10
        Region 0: [virtual] Memory at f4400c00 (32-bit, non-prefetchable) 
[disabled] [size=256]
        Capabilities: <access denied>
        Kernel driver in use: pci-stub
        Kernel modules: ricoh_mmc

08:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter 
(rev 12)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 10
        Region 0: [virtual] Memory at f4401000 (32-bit, non-prefetchable) 
[disabled] [size=256]
        Capabilities: <access denied>
        Kernel driver in use: pci-stub

08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
        Subsystem: Hewlett-Packard Company Device 30cd
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 248, Cache Line Size: 1020 bytes
        Interrupt: pin B routed to IRQ 10
        Region 0: Memory at f4401400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: pci-stub

Reply via email to