On Sat, Mar 06, 2010 at 05:38:35PM +0800, [email protected] wrote: > The idea is simple, just to pin the guest VM user space and then > let host NIC driver has the chance to directly DMA to it. > The patches are based on vhost-net backend driver. We add a device > which provides proto_ops as sendmsg/recvmsg to vhost-net to > send/recv directly to/from the NIC driver. KVM guest who use the > vhost-net backend may bind any ethX interface in the host side to > get copyless data transfer thru guest virtio-net frontend. > > We provide multiple submits and asynchronous notifiicaton to > vhost-net too. > > Our goal is to improve the bandwidth and reduce the CPU usage. > Exact performance data will be provided later. But for simple > test with netperf, we found bindwidth up and CPU % up too, > but the bindwidth up ratio is much more than CPU % up ratio. > > What we have not done yet: > packet split support > To support GRO > Performance tuning
Am I right to say that nic driver needs changes for these patches to work? If so, please publish nic driver patches as well. > what we have done in v1: > polish the RCU usage > deal with write logging in asynchroush mode in vhost > add notifier block for mp device > rename page_ctor to mp_port in netdevice.h to make it looks generic > add mp_dev_change_flags() for mp device to change NIC state > add CONIFG_VHOST_MPASSTHRU to limit the usage when module is not load > a small fix for missing dev_put when fail > using dynamic minor instead of static minor number > a __KERNEL__ protect to mp_get_sock() > > performance: > using netperf with GSO/TSO disabled, 10G NIC, > disabled packet split mode, with raw socket case compared to vhost. > > bindwidth will be from 1.1Gbps to 1.7Gbps > CPU % from 120%-140% to 140%-160% That's pretty low for a 10Gb nic. Are you hitting some other bottleneck, like high interrupt rate? Also, GSO support and performance tuning for raw are incomplete. Try comparing with e.g. tap with GSO. -- MST -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
