On Thu, Jul 22, 2010 at 04:47:12PM +0800, Hao, Xudong wrote:
> [r...@vt-nhm1 ~]# lspci -vv -s 01:00.0
> 01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet
> Controller (Copper) (rev 06)
> Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d3c20000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at d3c00000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at 5000 [size=32]
> Expansion ROM at d3e00000 [size=128K]
> Capabilities: [c8] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [d0] MSI: Mask- 64bit+ Count=1/1 Enable-
> Address: 00000000fee00418 Data: 0000
> Capabilities: [e0] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns,
> L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
> <4us, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140] Device Serial Number 82-ff-04-ff-ff-21-1b-00
> Kernel driver in use: pci-stub
> Kernel modules: e1000e
>
Can you try this patch for qemu-kvm please?
diff --git a/hw/device-assignment.c b/hw/device-assignment.c
index 2bba22f..7240985 100644
--- a/hw/device-assignment.c
+++ b/hw/device-assignment.c
@@ -238,9 +238,10 @@ static void assigned_dev_iomem_map_slow(PCIDevice
*pci_dev, int region_num,
DEBUG("%s", "slow map\n");
if (region_num == PCI_ROM_SLOT)
m = cpu_register_io_memory(slow_bar_read, NULL, region);
- else
+ else {
m = cpu_register_io_memory(slow_bar_read, slow_bar_write, region);
- cpu_register_physical_memory(e_phys, e_size, m);
+ cpu_register_physical_memory(e_phys, e_size, m);
+ }
/* MSI-X MMIO page */
if ((e_size > 0) &&
--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
