[version]
the host os version is 2.6.32
the guest os version is 2.6.16
[dmesg]
ACPI: (supports S3 S4 S5)
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level,
high) -> IRQ 11
io address 0001c040ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 10 (level,
high) -> IRQ 10
io address 0001c060ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 10 (level,
high) -> IRQ 10
io address 0001c080ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 11 (level,
high) -> IRQ 11
io address 0001c0a0<6>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link
[LNKC] -> GSI 11 (level, high) -> IRQ 11
io address 0001c0c0<6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link
[LNKD] -> GSI 10 (level, high) -> IRQ 10
io address 0001c0e0
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c01457b0>] __report_bad_irq+0x2b/0x69
[<c0145979>] note_interrupt+0x18b/0x1b2
[<c01452a9>] handle_IRQ_event+0x26/0x51
[<c014537f>] __do_IRQ+0xab/0xdc
[<c0106445>] do_IRQ+0x46/0x53
[<c0104e8a>] common_interrupt+0x1a/0x20
[<c01276f2>] __do_softirq+0x4f/0xc2
[<c0127793>] do_softirq+0x2e/0x32
[<c0104f3c>] apic_timer_interrupt+0x1c/0x30
[<c0102d55>] default_idle+0x2e/0x5c
[<c0102e14>] cpu_idle+0x91/0xad
[<c03946e5>] start_kernel+0x34c/0x353
handlers:
[<f88252ee>] (vp_interrupt+0x0/0x3e [virtio_pci])
Disabling IRQ #11
[config]
<domain type='kvm' id='1'>
<name>brd2vm1</name>
<uuid>211cf0f8-3ed6-42bf-0745-a8d5ee024213</uuid>
<memory>22020096</memory>
<currentMemory>22020096</currentMemory>
<memoryBacking>
<hugepages/>
</memoryBacking>
<vcpu>8</vcpu>
<os>
<type arch='i686' machine='rhel6.0.0'>hvm</type>
<boot dev='network'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
<clock offset='utc'>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/libexec/qemu-kvm</emulator>
<controller type='ide' index='0'>
<alias name='ide0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01'
function='0x1'/>
</controller>
<interface type='bridge'>
<mac address='00:16:3e:00:02:08'/>
<source bridge='br0'/>
<target dev='vnet0'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04'
function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='00:16:3e:00:02:09'/>
<source bridge='br1'/>
<target dev='vnet1'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05'
function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='00:16:3e:00:02:0a'/>
<source bridge='br2'/>
<target dev='vnet2'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06'
function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='00:16:3e:00:02:0b'/>
<source bridge='br3'/>
<target dev='vnet3'/>
<model type='virtio'/>
<alias name='net3'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07'
function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='00:16:3e:00:02:0c'/>
<source bridge='br4'/>
<target dev='vnet4'/>
<model type='virtio'/>
<alias name='net4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08'
function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/1'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target port='0'/>
<alias name='serial0'/>
</console>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='5900' autoport='yes' keymap='en-us'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x0'/>
</video>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03'
function='0x0'/>
</memballoon>
</devices>
</domain>
[/proc/interrupts]
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5
CPU6 CPU7
0: 646 0 25420 0 0 0
0 101764 IO-APIC-edge timer
1: 0 0 8 0 0 0
0 0 IO-APIC-edge i8042
4: 0 0 0 0 2322 0
0 0 IO-APIC-edge serial
8: 0 0 0 0 0 0
0 0 IO-APIC-edge rtc
9: 0 0 0 0 0 0
0 0 IO-APIC-level acpi
10: 0 0 377142 0 0 0
0 0 IO-APIC-level virtio1, virtio2, virtio5
11: 100000 0 0 0 0 0
0 0 IO-APIC-level virtio3, virtio4
12: 0 0 0 0 104 0
0 0 IO-APIC-edge i8042
NMI: 127183 127190 127189 127188 127187 127183
127185 127184
LOC: 127164 127198 127197 127196 127195 127191
127193 127189
ERR: 0
MIS: 0
[lspci]
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
Subsystem: Unknown device 1af4:1100
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
Subsystem: Unknown device 1af4:1100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] (prog-if 80 [Master])
Subsystem: Unknown device 1af4:1100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at c000 [size=16]
00:01.2 USB Controller: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] (rev 01) (prog-if 00 [UHCI])
Subsystem: Unknown device 1af4:1100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c020 [size=32]
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Subsystem: Unknown device 1af4:1100
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00
[VGA controller])
Subsystem: Unknown device 1af4:1100
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2010000 [disabled] [size=64K]
00:03.0 RAM memory: Unknown device 1af4:1002
Subsystem: Unknown device 1af4:0005
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c040 [size=32]
00:04.0 Ethernet controller: Unknown device 1af4:1000
Subsystem: Unknown device 1af4:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c060 [size=32]
Region 1: Memory at f2020000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2030000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Mask- TabSize=3
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
00:05.0 Ethernet controller: Unknown device 1af4:1000
Subsystem: Unknown device 1af4:0001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c080 [size=32]
Region 1: Memory at f2040000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2050000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Mask- TabSize=3
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
00:06.0 Ethernet controller: Unknown device 1af4:1000
Subsystem: Unknown device 1af4:0001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c0a0 [size=32]
Region 1: Memory at f2060000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2070000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Mask- TabSize=3
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
00:07.0 Ethernet controller: Unknown device 1af4:1000
Subsystem: Unknown device 1af4:0001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c0c0 [size=32]
Region 1: Memory at f2080000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2090000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Mask- TabSize=3
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
00:08.0 Ethernet controller: Unknown device 1af4:1000
Subsystem: Unknown device 1af4:0001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c0e0 [size=32]
Region 1: Memory at f20a0000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f20b0000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Mask- TabSize=3
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
[lsmod]
Module Size Used by
af_packet 53768 92
ipmi_devintf 22136 4
ipmi_msghandler 44480 1 ipmi_devintf
virtio_blk 21128 0
virtio_net 29952 0
virtio_pci 26500 0
virtio_ring 22528 2 virtio_net,virtio_pci
virtio 22148 3 virtio_blk,virtio_net,virtio_pci
the nic of virtio3, virtio4 did not work, because IRQ #11 is disabled.
IRQ11 is disabled, because there are 100000 times interrupts is unhandled.
11: 100000 0 0 0 0 0
0 0 IO-APIC-level virtio3, virtio4
there are three pci device routed to IRQ 11. 00:01.2, 00:03.0, 00:07.0.
the guest os is boot from network.
why there are 100000 times interrupt is unhandled?
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
