On Tue, 2010-12-14 at 00:25 +0100, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kis...@siemens.com>
>
> If we emulate the command register, we must only read its content from
> the shadow config space. For dword read of both PCI_COMMAND and
> PCI_STATUS, at least the latter must be read from the device.
>
> For simplicity reasons and as the code path is not considered
> performance critical for the affected SRIOV devices, the fix performes
> device access to the command word unconditionally, even if emulation is
> enabled and only that word is read.
>
> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
> ---
> hw/device-assignment.c | 14 +++++++++++---
> 1 files changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/hw/device-assignment.c b/hw/device-assignment.c
> index bc3a57b..6ff1456 100644
> --- a/hw/device-assignment.c
> +++ b/hw/device-assignment.c
> @@ -494,14 +494,11 @@ static uint32_t assigned_dev_pci_read_config(PCIDevice
> *d, uint32_t address,
> /*
> * Catch access to
> * - vendor & device ID
> - * - command register (if emulation needed)
> * - base address registers
> * - ROM base address & capability pointer
> * - interrupt line & pin
> */
> if (ranges_overlap(address, len, PCI_VENDOR_ID, 4) ||
> - (pci_dev->need_emulate_cmd &&
> - ranges_overlap(address, len, PCI_COMMAND, 2)) ||
> ranges_overlap(address, len, PCI_BASE_ADDRESS_0, 24) ||
> ranges_overlap(address, len, PCI_ROM_ADDRESS, 8) ||
> ranges_overlap(address, len, PCI_INTERRUPT_LINE, 2)) {
> @@ -533,6 +530,17 @@ do_log:
> DEBUG("(%x.%x): address=%04x val=0x%08x len=%d\n",
> (d->devfn >> 3) & 0x1F, (d->devfn & 0x7), address, val, len);
>
> + if (pci_dev->need_emulate_cmd &&
> + ranges_overlap(address, len, PCI_COMMAND, 2)) {
> + if (address == PCI_COMMAND) {
> + val &= 0xffff0000;
> + val |= pci_default_read_config(d, PCI_COMMAND, 2);
> + } else {
> + /* high-byte access */
> + val = pci_default_read_config(d, PCI_COMMAND+1, 1);
> + }
> + }
> +
> if (!pci_dev->cap.available) {
> /* kill the special capabilities */
> if (address == PCI_COMMAND && len == 4) {
We might be able to use the merge_bits function that I just added for
capability support, perhaps something like:
if (pci_dev->need_emulate_cmd) {
val = merge_bits(val, pci_default_read_config(d, address, len),
PCI_COMMAND, 0xffff)
}
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
