On 04/25/11 11:30, Alex Williamson wrote:
> # modprobe -r igbvf
> # ip link set eth2 vf 6 mac 02:00:10:91:73:01
> # modprobe igbvf
> # dmesg | grep "igbvf 0000\:01\:11.5\: Address\:"
> igbvf 0000:01:11.5: Address: d2:c8:17:d6:97:f7
> igbvf 0000:01:11.5: Address: 4e:ee:2a:d8:12:7c
> igbvf 0000:01:11.5: Address: 02:00:10:91:73:01
> # modprobe -r igbvf
> # echo 1 > /sys/bus/pci/devices/0000:01:11.5/reset
> # modprobe igbvf
> # dmesg | grep "igbvf 0000\:01\:11.5\: Address\:"
> igbvf 0000:01:11.5: Address: d2:c8:17:d6:97:f7
> igbvf 0000:01:11.5: Address: 4e:ee:2a:d8:12:7c
> igbvf 0000:01:11.5: Address: 02:00:10:91:73:01
> igbvf 0000:01:11.5: Address: 02:00:10:91:73:01
>
> So now it sticks. You're going to get random mac addresses on the VFs
> every time you reload the igb driver (ie. ever boot) anyway (at least
> with these sr-iov cards), so if you need consistent macs, they probably
> need to be set before launching the VM anyway. Thanks,
>
> Alex
>
Ok, I was able to repeat the above commands from the host command line.
However, when qemu-kvm starts the MAC is reset.
# ip link show | less
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 00:1b:21:98:b7:10 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 02:12:34:56:80:20
--> that's the MAC address I set
I start qemu-kvm (unpatched version) and the host side sees the address
changed:
# ip link show | less
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 00:1b:21:98:b7:10 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 7a:17:3f:98:0f:db
Can you try that aspect on your end - seeing if the MAC address
maintains after starting qemu-kvm?
David
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
