On Mon, Jun 27, 2011 at 08:19:56PM +0200, Jan Kiszka wrote:
> From: Jan Kiszka <[email protected]>
>
> Device assignment no longer peeks into config_map, so we can drop all
> the related changes and sync the PCI core with upstream.
>
> Signed-off-by: Jan Kiszka <[email protected]>
That's great because I was looking at refactoring that code.
Will make merges much less painful.
> ---
> hw/pci.c | 29 +++++++++++++++--------------
> hw/pci.h | 8 ++++++--
> 2 files changed, 21 insertions(+), 16 deletions(-)
>
> diff --git a/hw/pci.c b/hw/pci.c
> index 5deaa04..a637506 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -793,7 +793,7 @@ static void pci_config_alloc(PCIDevice *pci_dev)
> pci_dev->cmask = qemu_mallocz(config_size);
> pci_dev->wmask = qemu_mallocz(config_size);
> pci_dev->w1cmask = qemu_mallocz(config_size);
> - pci_dev->config_map = qemu_mallocz(config_size);
> + pci_dev->used = qemu_mallocz(config_size);
> }
>
> static void pci_config_free(PCIDevice *pci_dev)
> @@ -802,7 +802,7 @@ static void pci_config_free(PCIDevice *pci_dev)
> qemu_free(pci_dev->cmask);
> qemu_free(pci_dev->wmask);
> qemu_free(pci_dev->w1cmask);
> - qemu_free(pci_dev->config_map);
> + qemu_free(pci_dev->used);
> }
>
> /* -1 for devfn means auto assign */
> @@ -833,8 +833,6 @@ static PCIDevice *do_pci_register_device(PCIDevice
> *pci_dev, PCIBus *bus,
> pci_dev->irq_state = 0;
> pci_config_alloc(pci_dev);
>
> - memset(pci_dev->config_map, 0xff, PCI_CONFIG_HEADER_SIZE);
> -
> pci_config_set_vendor_id(pci_dev->config, info->vendor_id);
> pci_config_set_device_id(pci_dev->config, info->device_id);
> pci_config_set_revision(pci_dev->config, info->revision);
> @@ -1899,7 +1897,7 @@ static int pci_find_space(PCIDevice *pdev, uint8_t size)
> int offset = PCI_CONFIG_HEADER_SIZE;
> int i;
> for (i = PCI_CONFIG_HEADER_SIZE; i < config_size; ++i)
> - if (pdev->config_map[i])
> + if (pdev->used[i])
> offset = i + 1;
> else if (i - offset + 1 == size)
> return offset;
> @@ -2080,13 +2078,13 @@ int pci_add_capability(PCIDevice *pdev, uint8_t
> cap_id,
> int i;
>
> for (i = offset; i < offset + size; i++) {
> - if (pdev->config_map[i]) {
> + if (pdev->used[i]) {
> fprintf(stderr, "ERROR: %04x:%02x:%02x.%x "
> "Attempt to add PCI capability %x at offset "
> "%x overlaps existing capability %x at offset %x\n",
> pci_find_domain(pdev->bus), pci_bus_num(pdev->bus),
> PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
> - cap_id, offset, pdev->config_map[i], i);
> + cap_id, offset, pdev->used[i], i);
> return -EINVAL;
> }
> }
> @@ -2096,14 +2094,12 @@ int pci_add_capability(PCIDevice *pdev, uint8_t
> cap_id,
> config[PCI_CAP_LIST_ID] = cap_id;
> config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST];
> pdev->config[PCI_CAPABILITY_LIST] = offset;
> - memset(pdev->config_map + offset, cap_id, size);
> + pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
> + memset(pdev->used + offset, 0xFF, size);
> /* Make capability read-only by default */
> memset(pdev->wmask + offset, 0, size);
> /* Check capability by default */
> memset(pdev->cmask + offset, 0xFF, size);
> -
> - pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
> -
> return offset;
> }
>
> @@ -2119,11 +2115,16 @@ void pci_del_capability(PCIDevice *pdev, uint8_t
> cap_id, uint8_t size)
> memset(pdev->w1cmask + offset, 0, size);
> /* Clear cmask as device-specific registers can't be checked */
> memset(pdev->cmask + offset, 0, size);
> - memset(pdev->config_map + offset, 0, size);
> + memset(pdev->used + offset, 0, size);
>
> - if (!pdev->config[PCI_CAPABILITY_LIST]) {
> + if (!pdev->config[PCI_CAPABILITY_LIST])
> pdev->config[PCI_STATUS] &= ~PCI_STATUS_CAP_LIST;
> - }
> +}
> +
> +/* Reserve space for capability at a known offset (to call after load). */
> +void pci_reserve_capability(PCIDevice *pdev, uint8_t offset, uint8_t size)
> +{
> + memset(pdev->used + offset, 0xff, size);
> }
>
> uint8_t pci_find_capability(PCIDevice *pdev, uint8_t cap_id)
> diff --git a/hw/pci.h b/hw/pci.h
> index c7081bc..ed734b3 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -146,8 +146,8 @@ struct PCIDevice {
> /* Used to implement RW1C(Write 1 to Clear) bytes */
> uint8_t *w1cmask;
>
> - /* Used to allocate config space and track capabilities. */
> - uint8_t *config_map;
> + /* Used to allocate config space capabilities. */
> + uint8_t *used;
>
> /* the following fields are read only */
> PCIBus *bus;
> @@ -233,14 +233,18 @@ int pci_add_capability(PCIDevice *pdev, uint8_t cap_id,
>
> void pci_del_capability(PCIDevice *pci_dev, uint8_t cap_id, uint8_t
> cap_size);
>
> +void pci_reserve_capability(PCIDevice *pci_dev, uint8_t offset, uint8_t
> size);
> +
> uint8_t pci_find_capability(PCIDevice *pci_dev, uint8_t cap_id);
>
> +
> uint32_t pci_default_read_config(PCIDevice *d,
> uint32_t address, int len);
> void pci_default_write_config(PCIDevice *d,
> uint32_t address, uint32_t val, int len);
> void pci_device_save(PCIDevice *s, QEMUFile *f);
> int pci_device_load(PCIDevice *s, QEMUFile *f);
> +
> typedef void (*pci_set_irq_fn)(void *opaque, int irq_num, int level);
> typedef int (*pci_map_irq_fn)(PCIDevice *pci_dev, int irq_num);
>
> --
> 1.7.1
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html