On Sat, 20 Oct 2012 00:14:42 -0400, Christoffer Dall
<[email protected]> wrote:
> The vgic virtual cpu and emulated distributor interfaces must
> be mapped at a given physical address in the guest. This address is
> provided through the KVM_SET_DEVICE_ADDRESS ioctl, which happens after
> the KVM_CREATE_IRQCHIP ioctl is called, but before the first VCPU is
> excuted thorugh KVM_RUN. We create the vgic on KVM_CREATE_IRQCHIP, but
> query kvm_vgic_ready(kvm), which checks if the vgic.vctrl_base field has
> been set, before we execute a VCPU, and if it has not been set, we call
> kvm_vgic_init, which takes care of the remaining setup.
>
> We use the IS_VGIC_ADDR_UNDEF() macro, which compares to the
> VGIC_ADDR_UNDEF constant, to check if an address has been set; it's
> unlikely that a device will sit on address 0, but since this is a part
> of main kernel boot procedure if this stuff is enabled in the config,
> I'm being paranoid.
>
> The distributor and vcpu base addresses used to be a per-host setting
> global for all VMs, but this is not a requirement and when we want to
> emulate several boards on a single host, we need the flexibility of
> storing these guest addresses on a per-VM basis.
>
> Signed-off-by: Christoffer Dall <[email protected]>
> ---
> arch/arm/include/asm/kvm_vgic.h | 21 ++++++++--
> arch/arm/kvm/arm.c | 10 ++++-
> arch/arm/kvm/vgic.c | 82
> +++++++++++++++++++++++++++------------
> 3 files changed, 84 insertions(+), 29 deletions(-)
>
> diff --git a/arch/arm/include/asm/kvm_vgic.h
> b/arch/arm/include/asm/kvm_vgic.h
> index a688132..2de167f 100644
> --- a/arch/arm/include/asm/kvm_vgic.h
> +++ b/arch/arm/include/asm/kvm_vgic.h
> @@ -154,13 +154,14 @@ static inline void vgic_bytemap_set_irq_val(struct
> vgic_bytemap *x,
> struct vgic_dist {
> #ifdef CONFIG_KVM_ARM_VGIC
> spinlock_t lock;
> + bool ready;
>
> /* Virtual control interface mapping */
> void __iomem *vctrl_base;
>
> - /* Distributor mapping in the guest */
> - unsigned long vgic_dist_base;
> - unsigned long vgic_dist_size;
> + /* Distributor and vcpu interface mapping in the guest */
> + phys_addr_t vgic_dist_base;
> + phys_addr_t vgic_cpu_base;
>
> /* Distributor enabled */
> u32 enabled;
> @@ -243,6 +244,7 @@ struct kvm_exit_mmio;
> #ifdef CONFIG_KVM_ARM_VGIC
> int kvm_vgic_hyp_init(void);
> int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr);
> +int kvm_vgic_create(struct kvm *kvm);
> int kvm_vgic_init(struct kvm *kvm);
> void kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu);
> void kvm_vgic_sync_to_cpu(struct kvm_vcpu *vcpu);
> @@ -252,8 +254,9 @@ int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid,
> unsigned int irq_num,
> int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);
> bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run,
> struct kvm_exit_mmio *mmio);
> +bool irqchip_in_kernel(struct kvm *kvm);
>
> -#define irqchip_in_kernel(k) (!!((k)->arch.vgic.vctrl_base))
> +#define vgic_initialized(k) ((k)->arch.vgic.ready)
> #define
> vgic_active_irq(v) (atomic_read(&(v)->arch.vgic_cpu.irq_active_count)
==
> 0)
>
> #else
> @@ -267,6 +270,11 @@ static inline int kvm_vgic_set_addr(struct kvm
*kvm,
> unsigned long type, u64 add
> return 0;
> }
>
> +static inline int kvm_vgic_create(struct kvm *kvm)
> +{
> + return 0;
> +}
> +
> static inline int kvm_vgic_init(struct kvm *kvm)
> {
> return 0;
> @@ -298,6 +306,11 @@ static inline int irqchip_in_kernel(struct kvm
*kvm)
> return 0;
> }
>
> +static inline bool kvm_vgic_initialized(struct kvm *kvm)
> +{
> + return true;
> +}
> +
> static inline int vgic_active_irq(struct kvm_vcpu *vcpu)
> {
> return 0;
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 282794e..d64783e 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -636,6 +636,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu,
> struct kvm_run *run)
> if (unlikely(vcpu->arch.target < 0))
> return -ENOEXEC;
>
> + /* Initalize the VGIC before running the vcpu */
> + if (unlikely(irqchip_in_kernel(vcpu->kvm) &&
> + !vgic_initialized(vcpu->kvm))) {
> + ret = kvm_vgic_init(vcpu->kvm);
> + if (ret)
> + return ret;
> + }
> +
> if (run->exit_reason == KVM_EXIT_MMIO) {
> ret = kvm_handle_mmio_return(vcpu, vcpu->run);
> if (ret)
> @@ -889,7 +897,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
> #ifdef CONFIG_KVM_ARM_VGIC
> case KVM_CREATE_IRQCHIP: {
> if (vgic_present)
> - return kvm_vgic_init(kvm);
> + return kvm_vgic_create(kvm);
> else
> return -EINVAL;
> }
> diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c
> index d63b7f8..fa591db 100644
> --- a/arch/arm/kvm/vgic.c
> +++ b/arch/arm/kvm/vgic.c
> @@ -65,12 +65,17 @@
> * interrupt line to be sampled again.
> */
>
> -/* Temporary hacks, need to be provided by userspace emulation */
> -#define VGIC_DIST_BASE 0x2c001000
> +#define VGIC_ADDR_UNDEF (-1)
> +#define IS_VGIC_ADDR_UNDEF(_x) ((_x) == (typeof(_x))VGIC_ADDR_UNDEF)
This is an awkward construct. You should really know the type of what
you're checking. Consider:
#define VGIC_ADDR_UNDEF ((phys_addr_t)(~0UL)
#define IS_VGIC_ADDR_UNDEF(x) ((x) == VGIC_ADDR_UNDEF)
> +
> +
> #define VGIC_DIST_SIZE 0x1000
> #define VGIC_CPU_BASE 0x2c002000
> #define VGIC_CPU_SIZE 0x2000
>
> +/* Physical address of vgic virtual cpu interface */
> +static phys_addr_t vgic_vcpu_base;
> +
> /* Virtual control interface base address */
> static void __iomem *vgic_vctrl_base;
>
> @@ -538,7 +543,7 @@ bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct
> kvm_run *run, struct kvm_exi
>
> if (!irqchip_in_kernel(vcpu->kvm) ||
> mmio->phys_addr < base ||
> - (mmio->phys_addr + mmio->len) > (base + dist->vgic_dist_size))
> + (mmio->phys_addr + mmio->len) > (base + VGIC_DIST_SIZE))
> return false;
>
> range = find_matching_range(vgic_ranges, mmio, base);
> @@ -1027,7 +1032,7 @@ void kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
> vgic_cpu->vgic_irq_lr_map[i] = LR_EMPTY;
> }
>
> - BUG_ON(!vcpu->kvm->arch.vgic.vctrl_base);
> + BUG_ON(IS_VGIC_ADDR_UNDEF(vcpu->kvm->arch.vgic.vctrl_base));
> reg = readl_relaxed(vcpu->kvm->arch.vgic.vctrl_base + GICH_VTR);
> vgic_cpu->nr_lr = (reg & 0x1f) + 1;
>
> @@ -1101,29 +1106,23 @@ out_free_irq:
>
> int kvm_vgic_init(struct kvm *kvm)
> {
> - int ret, i;
> - struct resource vcpu_res;
> + int ret = 0, i;
>
> mutex_lock(&kvm->lock);
>
> - if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
> - kvm_err("Cannot obtain VCPU resource\n");
> - ret = -ENXIO;
> + if (vgic_initialized(kvm))
> goto out;
> - }
>
> - if (atomic_read(&kvm->online_vcpus) || kvm->arch.vgic.vctrl_base) {
> - ret = -EEXIST;
> + if (IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_dist_base) ||
> + IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_cpu_base)) {
> + kvm_err("Need to set vgic cpu and dist addresses first\n");
> + ret = -ENXIO;
> goto out;
> }
>
> - spin_lock_init(&kvm->arch.vgic.lock);
> - kvm->arch.vgic.vctrl_base = vgic_vctrl_base;
> - kvm->arch.vgic.vgic_dist_base = VGIC_DIST_BASE;
> - kvm->arch.vgic.vgic_dist_size = VGIC_DIST_SIZE;
> + ret = kvm_phys_addr_ioremap(kvm, kvm->arch.vgic.vgic_cpu_base,
> + vgic_vcpu_base, VGIC_CPU_SIZE);
>
> - ret = kvm_phys_addr_ioremap(kvm, VGIC_CPU_BASE,
> - vcpu_res.start, VGIC_CPU_SIZE);
> if (ret) {
> kvm_err("Unable to remap VGIC CPU to VCPU\n");
> goto out;
> @@ -1132,12 +1131,45 @@ int kvm_vgic_init(struct kvm *kvm)
> for (i = 32; i < VGIC_NR_IRQS; i += 4)
> vgic_set_target_reg(kvm, 0, i);
>
> + kvm_timer_init(kvm);
> + kvm->arch.vgic.ready = true;
> out:
> mutex_unlock(&kvm->lock);
> + return ret;
> +}
>
> - if (!ret)
> - kvm_timer_init(kvm);
> +bool irqchip_in_kernel(struct kvm *kvm)
> +{
> + return !(IS_VGIC_ADDR_UNDEF(vgic_vcpu_base));
Erm... This check is supposed VM specific. Here, you check something that
will be initialized once and for all when the first VM is run. Use one of
the vgic *guest* base addresses instead.
> +}
>
> +int kvm_vgic_create(struct kvm *kvm)
> +{
> + int ret;
> + struct resource vcpu_res;
> +
> + mutex_lock(&kvm->lock);
> +
> + if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
> + kvm_err("Cannot obtain VCPU resource\n");
> + ret = -ENXIO;
> + goto out;
> + }
This function is called on every VM creation. Consider moving this lookup
and the vgic_vcpu_base assignment to kvm_vgic_hyp_init().
> + if (atomic_read(&kvm->online_vcpus) || kvm->arch.vgic.vctrl_base) {
> + ret = -EEXIST;
> + goto out;
> + }
> +
> + spin_lock_init(&kvm->arch.vgic.lock);
> + kvm->arch.vgic.vctrl_base = vgic_vctrl_base;
> + kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
> + kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
> +
> + vgic_vcpu_base = vcpu_res.start;
> + ret = 0;
> +out:
> + mutex_unlock(&kvm->lock);
> return ret;
> }
>
> @@ -1151,12 +1183,14 @@ int kvm_vgic_set_addr(struct kvm *kvm, unsigned
> long type, u64 addr)
> mutex_lock(&kvm->lock);
> switch (type) {
> case KVM_VGIC_V2_ADDR_TYPE_DIST:
> - if (addr != VGIC_DIST_BASE)
> - return -EINVAL;
> + if (!IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_dist_base))
> + return -EEXIST;
> + kvm->arch.vgic.vgic_dist_base = addr;
> break;
> case KVM_VGIC_V2_ADDR_TYPE_CPU:
> - if (addr != VGIC_CPU_BASE)
> - return -EINVAL;
> + if (!IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_cpu_base))
> + return -EEXIST;
> + kvm->arch.vgic.vgic_cpu_base = addr;
> break;
> default:
> r = -ENODEV;
We need some additional checks here about the validity of the address (at
least page aligned, and non overlapping with memory or other in-kernel
device models).
M.
--
Fast, cheap, reliable. Pick two.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
