On Sat, Dec 28, 2013 at 10:31:35PM -0800, Christoffer Dall wrote:
> On Wed, Dec 04, 2013 at 05:42:57PM +0100, Andrew Jones wrote:
> > This is the initial arm test framework and a first simple test that
> > checks some bootinfo. kvm isn't needed to run this test. This patch
> > also adds a common build environment variable, $QEMU_BIN, which
> > allows makefiles to call on qemu when needed.
> >
> > Try it out with
> > yum install gcc-arm-linux-gnu dtc
> > export QEMU=[qemu with mach-virt and virtio-testdev]
> > ./configure --cross-prefix=arm-linux-gnu- --arch=arm
> > make
> > ./run_tests.sh
>
> You refer to QEMU_BIN but your example uses QEMU= ?
Two different vars. QEMU_BIN is an internal makefile var set in
config.mak. QEMU is an ENV. Hmm, I guess I could reuse the QEMU
name in the makefiles too...
<snip>
> > + return ret;
> > +}
>
> consider renaming this file to boottest.c to avoid the confusion that
> this file is needed to boot anything that runs tests...
I think I'll rename it to selftest.c, as it's really just a test
framework selftest.
>
> > diff --git a/arm/cstart.S b/arm/cstart.S
> > new file mode 100644
> > index 0000000000000..05d4bb5becaa0
> > --- /dev/null
> > +++ b/arm/cstart.S
> > @@ -0,0 +1,38 @@
> > +
> > +#define CR_B (1 << 7) /* Big endian */
> > +
> > +.arm
> > +
> > +.section .init
> > +
> > +.globl start
> > +start:
> > + /* bootloader params are in r0-r2 */
>
> which bootlaoder params are they? What boot protocol is used, what are
> you expecting to be in the various registers?
>
> I assume this tool expects r0-r2 to follow the definitions in
> Documentation/arm/Booting in the kernel?
Correct. I guess I can add a 'see Documentation/arm/Booting comment'
>
> > + ldr sp, =stacktop
> > +
> > + mrc p15, 0, r8, c1, c0, 0 @r8 = sctrl
>
> that's sctlr, not sctrl.
fixed
>
> > + ands r3, r8, #CR_B @set BE, if necessary
> > + ldrne r3, =cpu_is_be
> > + movne r4, #1
>
> This is deprecated for ARMv7 according to the ARM ARM. What is the
> intention here? Does qemu support running this test tool with the
> system configured for big-endian? If so, I think this is a build option
> for this binary or you need to come up with some other
> architecture-compliant method of detecting the endian-state.
Yes, qemu allows big-endian. I haven't tested it though, but suspect
someday we will want big-endian guests tested as well. I'll fix the
detection.
> > +++ b/arm/unittests.cfg
> > @@ -0,0 +1,11 @@
> > +# Define your new unittest following the convention:
> > +# [unittest_name]
> > +# file = foo.flat # Name of the flat file to be used
> > +# smp = 2 # Number of processors the VM will use during this test
> > +# extra_params = -append <params...> # Additional parameters used
>
> used to QEMU I presume?
correct
>
> > +# arch = arm/arm64 # Only if the test case works only on one of them
>
> Do we have any verified support for arm64 yet?
not yet, high on my TODO list though.
> > +
> > +CFLAGS += -Wextra
> > +CFLAGS += -marm
> > +#CFLAGS += -mcpu=$(PROCESSOR)
>
> This looks weird, should it not be $(PROCESSOR) and default to
> cortex-a15 if it's not set?
Agreed.
>
> (also note that you can now use -cpu host with mach-virt which may make
> your life easier).
I'll think about how we might/must use '-cpu host'.
>
> > +CFLAGS += -mcpu=cortex-a15
> > +CFLAGS += -O2
>
> Why do we choose this particular optimzation-level in the arch-specific
> config?
My cross-compiler was generating broken code with anything less. I
haven't checked later compilers yet to see if it's fixed or not.
>
> > +
> > +libgcc := $(shell $(CC) -m$(ARCH) --print-libgcc-file-name)
> > +start_addr := $(shell printf "%x\n" $$(( $(phys_base) + $(kernel_offset)
> > )))
> > +
> > +FLATLIBS = $(libcflat) $(libgcc) $(libeabi)
> > +%.elf: %.o $(FLATLIBS) arm/flat.lds
> > + $(CC) $(CFLAGS) -nostdlib -o $@ \
> > + -Wl,-T,arm/flat.lds,--build-id=none,-Ttext=$(start_addr) \
> > + $(filter %.o, $^) $(FLATLIBS)
>
> I have no idea what the above rules are doing :-(
Calls the linker on the *.o files with the supplied linker script, and
a .text addr of $(start_addr). Also gets rid of the build-id section, which
messes up the start address. And supplies libs to link with, which need to
be in a particular order (defined in FLATLIBS).
>
> > +
> > +$(libeabi): $(eabiobjs)
> > + $(AR) rcs $@ $^
> > +
> > +%.flat: %.elf
> > + $(OBJCOPY) -O binary $^ $@
> > +
> > +tests-common = $(TEST_DIR)/boot.flat
> > +
> > +tests_and_config = $(TEST_DIR)/*.flat $(TEST_DIR)/unittests.cfg
> > +
> > +test_cases: $(tests-common) $(tests)
>
> what's the distinction between tests-common and tests? arm/arm64 vs.
> one or the other, or?
Correct. Eventually we'll have tests-common, which will be the majority
and apply to both, and also tests which are specific to one.
> > +void io_init_early(void)
> > +{
> > + const struct iomap *m = iomaps_find_compatible("arm,pl011");
> > + if (!m)
> > + halt(ENXIO);
> > + uart0_base = (u8 *)compat_ptr(m->addrs[0]);
> > +}
>
> is io_init_early going to do something else later on or is it just
> early_console_init? If the latter, then name the function as such.
I'll rename for now, as I don't know if it will do something else
yet. I guess we can rename it again if it ever does.
>
> > +
> > +void io_init(void)
> > +{
> > + virtio_testdev_init();
> > +}
> > diff --git a/lib/arm/io.h b/lib/arm/io.h
> > new file mode 100644
> > index 0000000000000..f058f7e54d4a7
> > --- /dev/null
> > +++ b/lib/arm/io.h
> > @@ -0,0 +1,24 @@
> > +#ifndef _ARM_IO_H_
> > +#define _ARM_IO_H_
> > +
> > +#define cpu_is_be cpu_is_be
>
> huh?
>
> > +extern bool cpu_is_be;
See lib/libio.h, it has
#ifndef cpu_is_be
#define cpu_is_be 0
#endif
> > +static void read_atags(u32 id, u32 *info)
> > +{
> > + u32 *p = info;
> > +
> > + if (!p) {
> > + printf("Can't find bootinfo. mach-type = %x\n", id);
> > + exit(ENOEXEC);
> > + }
> > +
> > + /*
> > + * p[0] count of words for the tag
> > + * p[1] tag id
> > + * p[2..] tag data
> > + */
> > + for (; p[0] != 0; p += p[0])
>
> braces, please.
added.
>
> > + switch (p[1]) {
> > + case ATAG_CORE:
> > + core.flags = p[2];
> > + core.pagesize = p[3];
> > + core.rootdev = p[4];
> > + break;
> > + case ATAG_MEM:
> > + mem32.size = p[2];
> > + mem32.start = p[3];
> > + break;
> > + case ATAG_CMDLINE:
> > + __args = (char *)&p[2];
> > + break;
> > + }
> > +}
> > +
> > +static void read_bootinfo(u32 id, u32 *info)
> > +{
> > + u32 *atags = NULL;
> > +
> > + mach_type_id = id;
> > +
> > + if (info[0] == be32_to_cpu(FDT_SIG)) {
> > + /*
> > + * fdt reading is not [yet?] implemented. So calculate
> > + * the ATAGS addr to read that instead.
> > + */
> > + atags = (u32 *)(start - KERNEL_OFFSET + ATAG_OFFSET);
>
> are the atags always supposed to be loaded even for device-tree booting?
> I could not find this in any ARM booting documents, and QEMU does seem
> to do this, but only for auto-generated device trees, which could just
> be a bug in do_cpu_reset?
Looks like Peter confirms I can't rely on this anymore. I guess it's
time to just be one with libfdt.
> > diff --git a/lib/test_util.c b/lib/test_util.c
> > new file mode 100644
> > index 0000000000000..3de1f74f83455
> > --- /dev/null
> > +++ b/lib/test_util.c
> > @@ -0,0 +1,34 @@
> > +#include "libcflat.h"
> > +#include "test_util.h"
> > +
> > +bool enough_args(int nargs, int needed)
> > +{
> > + if (nargs >= needed)
> > + return true;
> > +
> > + fail("Not enough arguments.\n");
> > + return false;
> > +}
> > +
> > +/*
> > + * Typically one would compare val == strtoul(expected, endp, base),
> > + * but we don't have, nor at this point really need, strtoul, so we
> > + * convert val to a string instead. base can only be 10 or 16.
> > + */
> > +bool check_u32(u32 val, int base, char *expected)
> > +{
> > + char *fmt = base == 10 ? "%d" : "%x";
> > + char val_str[16];
> > +
> > + snprintf(val_str, 16, fmt, val);
> > +
> > + if (base == 16)
> > + while (*expected == '0' || *expected == 'x')
> > + ++expected;
> > +
> > + if (strcmp(val_str, expected) == 0)
> > + return true;
> > +
> > + fail("expected %s, but have %s\n", expected, val_str);
> > + return false;
> > +}
> > diff --git a/lib/test_util.h b/lib/test_util.h
> > new file mode 100644
> > index 0000000000000..0e3e6c4a80d51
> > --- /dev/null
> > +++ b/lib/test_util.h
> > @@ -0,0 +1,13 @@
> > +#ifndef _TEST_UTIL_H_
> > +#define _TEST_UTIL_H_
> > +#include "libcflat.h"
> > +
> > +#define PASS 0
> > +#define FAIL 1
> > +
> > +#define pass(fmt...) printf("PASS: " fmt)
> > +#define fail(fmt...) printf("FAIL: " fmt)
> > +
> > +bool enough_args(int nargs, int needed);
> > +bool check_u32(u32 val, int base, char *expected);
> > +#endif
> > --
> > 1.8.1.4
> >
>
> I was expecting to see a __raw_... IO accessor definitions for ARM here,
> specifically so we avoid the register-writeback versions that are not
> supported on ARM.
>
> See arch/arm/include/asm/io.h in the kernel.
k, I'll grab them, but they'll go in lib/arm/io.h. I think I'll drop
these lib/test_util.* in v3, so far they're fairly useless cruft. We
can bring them back if they have enough purpose later.
drew
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
