On Thu, Jul 25, 2019 at 03:09:49PM +0200, Alexander Graf wrote:
> This patch adds a unit test for the PL031 RTC that is used in the virt
> machine.
> It just pokes basic functionality. I've mostly written it to familiarize
> myself
> with the device, but I suppose having the test around does not hurt, as it
> also
> exercises the GIC SPI interrupt path.
>
> Signed-off-by: Alexander Graf <[email protected]>
> Reviewed-by: Andrew Jones <[email protected]>
>
> ---
>
> v1 -> v2:
>
> - Use FDT to find base, irq and existence
> - Put isb after timer read
> - Use dist_base for gicv3
>
> v2 -> v3
>
> - Enable compilation on 32bit ARM target
> - Use ioremap
>
> v3 -> v4:
>
> - Use dt_pbus_translate_node()
> - Make irq_triggered volatile
> ---
> arm/Makefile.common | 1 +
> arm/pl031.c | 260 ++++++++++++++++++++++++++++++++++++++++++++
> lib/arm/asm/gic.h | 1 +
> 3 files changed, 262 insertions(+)
> create mode 100644 arm/pl031.c
Thanks for the new version. I have a new nit (below), but my r-b stands
with or without making another change.
[...]
> +static int rtc_fdt_init(void)
> +{
> + const struct fdt_property *prop;
> + const void *fdt = dt_fdt();
> + struct dt_pbus_reg base;
> + int node, len;
> + u32 *data;
> +
> + node = fdt_node_offset_by_compatible(fdt, -1, "arm,pl031");
> + if (node < 0)
> + return -1;
> +
> + prop = fdt_get_property(fdt, node, "interrupts", &len);
> + assert(prop && len == (3 * sizeof(u32)));
> + data = (u32 *)prop->data;
> + assert(data[0] == 0); /* SPI */
> + pl031_irq = SPI(fdt32_to_cpu(data[1]));
> +
> + assert(!dt_pbus_translate_node(node, 0, &base));
We prefer to do something like
ret = dt_pbus_translate_node(node, 0, &base);
assert(!ret);
than the above, just in case we ever compiled with assert() defined as a
no-op. But the probability of doing that is pretty close to zero.
> + pl031 = ioremap(base.addr, base.size);
> +
> + return 0;
> +}
Thanks,
drew
_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
