Hi List, >Can you send me your manpage? > >Which distribution you are using? I have Debian unstable. > > I'm using Gentoo
>>I've imported a PCF file by checking Pre shared key.. >>I dont had to enter a group password. I have less knowledge at Cisco VPN, >>sorry. Now I enter user name and password and by trying to establish a >>connection i got: >> >>VpncScript: /root/.kde3.4/share/apps/kvpnc/vpnc-script.VPN via ZEDAT, >>Freie Universit??t Berlin >>info: Benutzerdefinierter lokaler Port "14195" wird benutzt >>info: Benutzerdefinierte IKE-Gruppe "dh2" wird benutzt >>info: UDP wird benutzt. >>info: Es wird versucht, zu Server "vpn.fu-berlin.de" (160.45.252.202) >>mit Benutzer "rhoepfn" und IPSec ID "hybrid-default" zu verbinden... >>info: "vpnc" ist gestartet. >> >>It stucks in connection state and after timeout it changes to disconnected, >> >> >go to advanced settings and disable userdefinied port (small bug in import but >should work too). Enable 'use udp (NAT-T)' (you need this because you are >behind a nat router). If it fails too, increase the connection timeout (at >university sometimes the concentrator laggs 20 sec before answer. > I've played a little bit around with my Cisco settings and now i got a wrong password error. :-( I'm sure that my password is right cause with an other CiscoVPNclient that i got from my university I can connect and use the VPN. Perhaps these Informations could help: <snip> VPN tunnel information. Client address: xxx.xxx.xxx.xxx Server address: xxx.xx.xxx.xxx Encryption: 168-bit 3-DES Authentication: HMAC-MD5 IP Compression: None NAT passthrough is active on port UDP 4500 </snip> Thanx for your help, Roland
pppd.8.gz
Description: application/gzip
