Hello everybody, I have a problem trying to connect to this IPSec VPN gateway. If I use the Netgear VPN client on Windows, I'm able to connect, but if I try to do it using KVPNc (OpenSWAN) from Ubuntu 7.10, using the same settings I used in the Netgear client, KVPNc hangs in the state "ready" and "connecting (yellow flag)". This is the output after having activated debugging:
debug: Connect try requested, profile: Profile, type: Openswan info: Il nome dell'host gateway (somedomain.com) risolve come "xxx.xxx.xxx.xxx". info: Il nome dell'host gateway (somedomain.com) risolve come "xxx.xxx.xxx.xxx". debug: default interface: eth2 debug: LocalIP: 192.168.0.3 debug: Backing up ipsec.conf, ipsec.secrets debug: ipsec.conf found in /etc, assuming /etc as prefix for Openswan. debug: [Openswan] Starting setup... debug: "tail -f /root/.kde/share/apps/kvpnc/ipsec.Profile.log" avviato. debug: [ipsec] Plutorun started on Sun Apr 13 16:31:23 CEST 2008 debug: [ipsec] Starting Pluto (Openswan Version 2.4.6 X.509-1.5.4 LDAP_V3 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OElLO]RdWNRD) debug: [ipsec] Setting NAT-Traversal port-4500 floating to off debug: [ipsec] port floating activation criteria nat_t=0/port_fload=1 debug: [ipsec] including NAT-Traversal patch (Version 0.6c) [disabled] debug: [ipsec] WARNING: Open of /dev/hw_random failed in init_rnd_pool(), trying alternate sources of random debug: [ipsec] WARNING: Using /dev/urandom as the source of random debug: [ipsec] ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0) debug: [ipsec] starting up 1 cryptographic helpers debug: [ipsec] WARNING: Open of /dev/hw_random failed in init_rnd_pool(), trying alternate sources of random debug: [ipsec] WARNING: Using /dev/urandom as the source of random debug: [ipsec] started helper pid=17505 (fd:5) debug: [ipsec] Using Linux 2.6 IPsec interface code on 2.6.22-14-generic debug: [ipsec] Changing to directory '/etc/ipsec.d/cacerts' debug: [ipsec] Changing to directory '/etc/ipsec.d/aacerts' debug: [ipsec] Changing to directory '/etc/ipsec.d/ocspcerts' debug: [ipsec] Changing to directory '/etc/ipsec.d/crls' debug: [ipsec] Warning: empty directory debug: [ipsec] listening for IKE messages debug: [ipsec] adding interface eth2/eth2 192.168.0.3:500 debug: [ipsec] adding interface vmnet8/vmnet8 192.168.75.1:500 debug: [ipsec] adding interface vmnet2/vmnet2 172.16.147.1:500 debug: [ipsec] adding interface lo/lo 127.0.0.1:500 debug: [ipsec] adding interface lo/lo ::1:500 debug: [ipsec] loading secrets from "/etc/ipsec.secrets" What could the problem be? Thanks a lot _________________________________________________________________ Divertiti con le nuove EMOTICON per Messenger! http://intrattenimento.it.msn.com/emoticon _______________________________________________ Kvpnc-user mailing list [email protected] https://mail.gna.org/listinfo/kvpnc-user
