Don't have a real answer, but some info that might help you debug. (a clue maybe;-)
A slow flashing SPKRPHN button was used on some models when the phone engaged "auto-redial". To activate, you used speakerphone (solid red), dialed a CO number, if the line was busy, on the 3rd busy "beep", the phone would disconnect, then periodically re-dial the "busy" number (now slow red blink). If you hit any button, the phone would drop out of the redial mode. I know the analog (kxt)1232 had this feature, and I think circle 3 of the 616 would do it too. There was something about changing the busy signal (type 1 or type 2) that affected this too. -larry --- "Roland H. Alden" <[EMAIL PROTECTED]> wrote: > > For some reason one of my phone set has had its > "SP-PHONE" light start a slow blink; pretty much > what you'd expect for voicemail waiting indicator. > > The system unit is an old 616, there is no voicemail > system sending message waiting. The phone itself is > not defective, any phone plugged into that port (12) > will blink SP-PHONE. > > A reboot did not fix. > > Clues? > __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
