I have posted a few related messages concerning this neverending saga. I have had some great input from some of you, and thanks for the help. Anyway, before dumping the entire memory, and reloading/rekeying, I wanted to post some more symptoms that I have discovered. Originally, after plugging a phone directly into port 7 and getting nothing, I thought I was looking att a dead port. A few of you who have several years with KX-T gear assured me that you have never seen a dead port, per say, but just errors in programming. I went ahead and made sure that the XDP feature was enabled, and then plugged in an SLT, did the '790' code, and then returned the ext to 'disabled' status; still nothing. Then, I re-enabled XDP, plugged in the digital phone, then plugged an SLT into the XDP port, and viola, the analog phone works, but not the digital. I know, the next thing is to make SURE that the 2nd pr. in the cord is good, and I tried 3 different ones, not to mention that one of them is what I had been using for programming on port 01. BTW, all of this is being done AT the KSU, and not through any other wiring, so I know there's nothing missed there. HAving asid all othat, are there any new ideas out there, or should I go ahead and dump it?
Thanks, David Jeter Vice President Total Home Entertainment 3501 I-35E Waxahachie, TX 75165 (972)938-1615 office (214)893-3471 cell (972)935-0539 fax _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
