|You can build one ARS Plan for both tenants as long as there are no dialing
|differnces between the two. move the sencond tenants lines to trunk group b
|nad to prevent the tenants sharing the lines go to Station:CO line Outgoing
|and make sure each tenant only has out going on their own lines.
Futzed around today...
ARS routing plan menu 5,2 aka (help calls this [322]) sez:
{|'s are used to help you line up things while reading...
also the TRG's are numbered but I stuck to my original use of letters
for here... }
ARS plan 1 | 2 | 3
Priority 123 |123| .....
Time-A
TRG bad | ce
mod 111 | 11
So I should have all trunks modified with a *67 leading. Right?
The trouble is, no matter what TRG's I put into ARS plan 2; they do
not get outside access. (NO CO ASSIGNED message upon dialing...)
All the ARS Plan 1 entries are fine.
Routing Plan 1 aka menu 5,3 [314,etc] has a * for 001; ergo any digits.
Routing Plan 2 aka F6 is exactly the same display as Plan 1.
Mod 1 is "*67" to force the block..
Where else do I have to turn on Plan2?
(Yes, if See&Pee offered per-line blocking I'd not be in this mess,
but it took a direct FCC order to get them to offer even per-call...
--
--
A host is a host from coast to [EMAIL PROTECTED]
& no one will talk to a host that's close........[v].(301) 56-LINUX
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
