You may need to turn on "call waiting" at the extension (I'm not sure of the code 7311 in the digital system). As long as the second line is programmed to ring at that phone then the cid should show up.
cp ----- Original Message ----- From: "Daryl J. Wolff" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 24, 2004 11:12 AM Subject: KX-T: Caller ID on TA624 > Hey everyone, > > Just installed a brand new TA624 newest release in a clients office. Was > wondering about the caller id (card came with the system) > > I know if you have call waiting from the co, that the information will show > on the phone when the call comes in. But this particular client has rollover > hunting lines, and would like to be able to see who is calling on the second > line while they are talking on the first. > > I.E. secratary is on the phone on line 1, and wants to see who is calling if > line 2 starts to ring. > > Anyone know if this is possible? > > Thanks! > > Daryl Wolff > > ************************************************* > Daryl J. Wolff > Wolff Network Solutions, Inc. > D/B/A W2Hosting.com > 1759 Avenida Del Sol > Boca Raton, Florida 33432 > Toll Free: 866-W2HOSTING Ext: 11 > Local: (561)347-1952 ext: 11 > Fax: (561)347-1952 > ****************************************************** > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
