In the US, it is a programmable thing, but it depends on the provider as well as the PBX being set properly.
I've had two systems with the same provider, one the provider never got the CLIP ID working right, the other system it worked fine from the start. Both KSU's were set up identical. I would check with the provider and make sure they have it set up at their end. On 3/10/07, Don Ritchie <[EMAIL PROTECTED]> wrote: > Sorry to say this Brian, BUT in every case of ISDN-PRI > That's the way it works, Your local exchange may be able to change that > number, BUT > every outgoing call will display that number. > > Brian Keat wrote: > > Hi guys > > > > I'm still trying to resolve an issue on a TD1232 equipped with PRI ISDN > > with 40 DDI numbers attached. Problem is that when any extension makes > > an outgoing call, the number on the called partys caller ID shows as the > > DDI pilot number not the individual extensions DDI number. Any help you > > can offer would be much appreciated. BTW the extensions are analogue not > > ISDN extensions. > > > > Brian > > > > _________________________________________________________________ > > KX-T Mailing list --- http://kxthelp.com/ > > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > > > > > -- > IF mothers feed their babies with tiny little spoons and forks, > do Chinese mothers use Toothpicks? > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > -- Charles Patterson [EMAIL PROTECTED] Patterson Communications, Inc. www.PattersonCommunications.com _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
